{"product_id":"cisco-10g-sfp-transceiver-hot-swappable-10gbps-optical-module-for-cloud-data-center-and-campus-networks","title":"Cisco 10G SFP+ Transceiver — Hot-Swappable 10Gbps Optical Module for Cloud, Data Center, and Campus Networks","description":"\u003cdiv\u003e\n\n\u003cp\u003eThe Cisco SFP+ Module is a high‑performance, plug‑in transceiver designed to unlock instant \u003cb\u003e10 Gigabit Ethernet\u003c\/b\u003e connectivity across data centers, campus networks, and enterprise deployments. Built to integrate seamlessly with Cisco devices and compatible third‑party hardware, this compact SFP+ module delivers reliable uplinks, scalable bandwidth, and simple management for busy networks. Whether you're upgrading uplinks, expanding server access, or consolidating edge connectivity, this module provides a flexible, future‑proof solution that minimizes downtime and maximizes throughput.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eBlazing fast 10 Gbps performance\u003c\/b\u003e with low latency and high payload efficiency, designed to meet the increasing demands of virtualization, cloud workloads, and data‑intensive applications. The 10 Gigabit Ethernet capability enables high‑speed uplinks and interswitch links, delivering sustained throughput across multicore servers and storage fabrics. This module supports rapid data transfer, supporting heavy traffic loads without compromising stability or quality of service.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWide compatibility and plug‑and‑play deployment\u003c\/b\u003e with Cisco switches, routers, and optical modules, plus broad vendor ecosystem support where allowed by SKU. Easy installation reduces maintenance windows and accelerates network rollout. The module is designed to integrate with Cisco’s management tools, allowing administrators to monitor performance, status, and error counters from a familiar interface.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eFlexible optics for diverse deployment scenarios\u003c\/b\u003e (SR, LR, and other variants depending on exact module type) enabling short‑reach fiber (multimode) and long‑reach fiber (single‑mode) or copper DAC options for close‑proximity links. This flexibility supports data center leaf\/spine architectures, core uplinks, and campus backbones, ensuring you can tailor the transceiver to your network topology and distance requirements.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eReliable, hot‑swappable design\u003c\/b\u003e allows maintenance and upgrades without powering down critical equipment, minimizing downtime and ensuring continuous operation. Backend firmware updates and management remain uninterrupted in many Cisco platforms, reducing operational risk during upgrades and replacements.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eCompact form factor with energy‑efficient operation\u003c\/b\u003e reduces cabling clutter and power consumption in dense environments, helping to lower total cost of ownership while maintaining robust performance for growing networks. The module’s efficient design supports high port density routers and switches without excessive heat or power draw.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eTechnical Details of Cisco SFP+ Module\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003eForm factor: SFP+\u003c\/li\u003e \u003cli\u003eData rate: Up to 10 Gbps\u003c\/li\u003e \u003cli\u003eInterface options: Fiber optic variants (e.g., SR, LR) or copper DAC variants, depending on SKU\u003c\/li\u003e \u003cli\u003eWavelength: Variant dependent (commonly 850 nm for multimode and 1310\/1550 nm for single‑mode) with manufacturer compatibility\u003c\/li\u003e \u003cli\u003eDistance and reach: Range varies by module type and fiber type; confirm per SKU\u003c\/li\u003e \u003cli\u003ePower consumption: Typical ranges depend on SKU and model family\u003c\/li\u003e \u003cli\u003eOperating temperature: See SKU data sheet; typical commercial ranges apply\u003c\/li\u003e \u003cli\u003eCompatibility: Designed for Cisco platforms and supported Cisco management tools; hot‑swappable\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eHow to Install Cisco SFP+ Module\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003ePower considerations: Many Cisco devices support hot‑swap of SFP+ modules; confirm device policy before installation. If your environment requires power downtime, plan a maintenance window to minimize impact.\u003c\/li\u003e \u003cli\u003ePrepare the module: Remove protective caps, inspect the module for any signs of damage, and verify the connector type matches the intended fiber or copper cable.\u003c\/li\u003e \u003cli\u003eSeat the module: Align the SFP+ module with the correct slot on the Cisco device, push firmly until the latch engages, and ensure the module is seated securely with no side movement.\u003c\/li\u003e \u003cli\u003eAttach the cable: Connect the appropriate fiber optic or copper DAC cable to the transceiver, ensuring correct connector type (e.g., LC for fiber) and proper polarity. Avoid bending or stressing the cable near the connector.\u003c\/li\u003e \u003cli\u003eVerify operation: Power on or resume operation, check the link LED indicators, and use the device’s management interface (CLI or GUI) to confirm link status, negotiated speed, and error counters. Run a basic throughput test to validate performance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cb\u003eWhat is the Cisco SFP+ Module?\u003c\/b\u003e A hot‑swappable 10 Gbps transceiver that enables high‑speed connections between Cisco devices and across the broader network, supporting flexible uplinks and interconnects.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eCan I use this module with non‑Cisco devices?\u003c\/b\u003e Some Cisco SFP+ modules are optimized for Cisco gear; consult SKU documentation and vendor compatibility guides to ensure proper operation with non‑Cisco equipment. Compatibility varies by module type and firmware.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWhat cables should I use?\u003c\/b\u003e Depending on the variant, use multimode fiber with an 850 nm SR transceiver or single‑mode fiber with a 1310\/1550 nm LR\/ER variant, or a copper DAC cable for very short connections. Always follow the module’s datasheet for exact recommendations and maximum reach.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eIs the SFP+ module hot‑swap capable?\u003c\/b\u003e Yes, most Cisco SFP+ modules support hot‑swap, allowing module replacement without powering down the device where supported by the host hardware and firmware.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWhat should I do if the link is down?\u003c\/b\u003e Verify that the module is fully seated, check LED indicators, ensure correct cable type and SFP+ variant, verify firmware compatibility, and test with a known good module if possible. If issues persist, consult Cisco support or your vendor for guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":45926674694370,"sku":"7430279","price":5894.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9510\/9090\/files\/175323617_2d242f8a-b367-4de5-b867-7ec3611b3612.jpg?v=1726821783","url":"https:\/\/pegasussonline.com\/products\/cisco-10g-sfp-transceiver-hot-swappable-10gbps-optical-module-for-cloud-data-center-and-campus-networks","provider":"PEGASUSS ","version":"1.0","type":"link"}