{"product_id":"cisco-catalyst-ie-3200-8p2s-rugged-switch-poe-ie3200-with-8-ge-2-sfp","title":"Cisco Catalyst Ie 3200 8P2S Rugged Switch Poe Ie3200 With 8 Ge 2 Sfp","description":"\u003cdiv\u003e\n\u003cp\u003eMeet the Cisco Catalyst IE-3200-8P2S Rugged Switch—the compact, purpose-built edge switch engineered for extreme industrial environments. Designed to withstand dust, vibration, moisture, and wide temperature ranges, this rugged IE-series device brings reliable Gigabit connectivity, scalable PoE power delivery, and Cisco IOS XE management to the toughest sites—from factory floors and energy facilities to outdoor rural deployments and transit hubs. With eight PoE+ ports and two 1 Gigabit SFP uplinks, it delivers secure, low-latency edge networking that powers cameras, sensors, access points, and industrial controllers while maintaining tight control over security and performance. A true backbone for industrial IoT and smart manufacturing, the IE-3200-8P2S combines resilience, edge intelligence, and straightforward management in a compact footprint.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eRugged, industrial-grade design:\u003c\/b\u003e Built to survive harsh environments, the IE-3200-8P2S resists dust, vibration, moisture, and temperature extremes typical of manufacturing floors, energy facilities, outdoor sites, and transportation hubs. Its rugged enclosure and robust thermal management ensure stable performance where consumer-grade gear would falter.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e8 PoE+ Ethernet ports:\u003c\/b\u003e Power and connect a wide range of PoE-enabled devices directly from the switch, including IP cameras, wireless access points, and environmental sensors. The PoE+ ports streamline installation by reducing separate power drops and cabling complexity at remote or space-constrained sites.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e2 Gigabit SFP uplinks for flexible connectivity:\u003c\/b\u003e Choose copper or fiber paths for short- or long-range backhaul, enabling resilient topologies, redundant links, and scalable network expansion as your needs grow.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eSecure, scalable management with Cisco IOS XE:\u003c\/b\u003e The device runs Cisco IOS XE, offering robust security features, role-based access control, ACLs, encrypted management, and easy integration with common IT and OT monitoring tools for centralized control and automation.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eEdge-ready with VLAN and QoS:\u003c\/b\u003e Designed for industrial edge deployments, it supports VLAN segmentation and QoS to prioritize critical traffic—ensuring reliable control, real-time monitoring, and secure, deterministic performance at the network edge.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eTechnical Details of Cisco Catalyst IE-3200-8P2S Rugged Switch\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003ePorts and connectivity:\u003c\/b\u003e 8 x Gigabit Ethernet PoE+ ports plus 2 x 1G SFP fiber uplink ports provide flexible, scalable access at the edge and dependable backhaul to the core.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003ePoE capabilities:\u003c\/b\u003e PoE+ support enables direct powering of IP cameras, access points, and other powered devices, simplifying installation and reducing the need for separate power drops at remote sites.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eManagement and security:\u003c\/b\u003e Cisco IOS XE-based platform delivers secure management, role-based access, ACLs, encrypted management, and compatibility with common monitoring and automation tools for industrial networks.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eRugged engineering:\u003c\/b\u003e Engineered to excel in demanding environments, with resistance to dust, vibration, and temperature extremes typical of industrial facilities and outdoor installations.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003ePerformance and reliability:\u003c\/b\u003e High-performance edge device designed to sustain reliable operation in distributed networks with VLAN segmentation and QoS to prioritize mission-critical traffic.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eHow to install Cisco Catalyst IE-3200-8P2S Rugged Switch\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eChoose an installation location that matches the device’s rugged operating envelope—protected from excessive dust and moisture, with adequate ventilation and access for maintenance.\u003c\/li\u003e \u003cli\u003eMount the switch securely in a rack, on a wall, or in a vehicle or cabinet designed for Rugged Cisco devices, following your site’s mounting standards and torque specifications.\u003c\/li\u003e \u003cli\u003eConnect the power source appropriate for your environment and verify power availability. Ensure that all power Rails meet the device’s voltage and current requirements and that power is stable before powering on.\u003c\/li\u003e \u003cli\u003eConnect your edge devices to the 8 PoE+ ports and establish the uplink paths by inserting fiber or copper cables into the 2 x 1G SFP ports, linking to the core or distribution switches as required.\u003c\/li\u003e \u003cli\u003eInitial configuration: connect to the console port with a terminal emulator or use the secure management interface provided by Cisco IOS XE. Create administrator credentials, enable SSH, configure basic network parameters, and set up VLANs and QoS policies as needed for your site.\u003c\/li\u003e \u003cli\u003eApply security policies, enable required features (RBAC, ACLs, encrypted management), and integrate with your network management or OT monitoring tools to streamline ongoing administration and automation.\u003c\/li\u003e \u003cli\u003eTest connectivity and PoE behavior across all edge devices, verify uplink performance, and confirm that VLAN segmentation and QoS are functioning as intended. Save the running configuration to startup configuration to preserve changes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eFrequently asked questions\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eWhat is the Cisco Catalyst IE-3200-8P2S Rugged Switch?\u003c\/b\u003e It is an industrial-grade, edge-ready switch in the Cisco IE Series with 8 PoE+ Ethernet ports and 2 Gigabit SFP uplinks, designed for harsh environments and edge computing applications.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWhere is this switch best used?\u003c\/b\u003e Ideal for manufacturing floors, energy facilities, transportation hubs, outdoor rural sites, and control rooms where space is limited and uptime is critical.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eDoes it support PoE+?\u003c\/b\u003e Yes. All eight PoE+ ports can power compatible devices such as IP cameras, APs, and PoE sensors, simplifying deployments in remote or space-constrained locations.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWhat management capabilities are included?\u003c\/b\u003e The device runs Cisco IOS XE, offering secure management, role-based access controls, ACLs, encrypted management, and compatibility with common network management and OT monitoring tools.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eCan I segment networks and prioritize traffic?\u003c\/b\u003e Yes. The IE-3200 supports VLAN segmentation and QoS, enabling you to isolate critical control traffic from less-sensitive data and ensure reliable performance for time-sensitive applications.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eHow do I install and configure this switch?\u003c\/b\u003e Install in a rugged-environment-approved enclosure, connect PoE devices and uplinks, access the console or secure management interface, apply basic network settings, VLANs, QoS, and security policies, and save the configuration for production use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":46756408721634,"sku":"5499210","price":6109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9510\/9090\/files\/242781933.jpg?v=1754893382","url":"https:\/\/pegasussonline.com\/products\/cisco-catalyst-ie-3200-8p2s-rugged-switch-poe-ie3200-with-8-ge-2-sfp","provider":"PEGASUSS ","version":"1.0","type":"link"}