{"product_id":"hpe-480-gb-solid-state-drive-2-5-internal-sata-600-mixed-use-480gb-ssd","title":"Hpe 480 Gb Solid State Drive 2 5 Internal Sata 600 Mixed Use 480Gb Ssd","description":"\u003cdiv\u003e\n\u003cp\u003eExperience enterprise-grade storage performance with the HPE 480 GB Solid State Drive. This 2.5-inch internal SSD is built for mixed-use workloads in demanding data-center environments, delivering high IOPS, low latency, and robust endurance. With a capacity of 480 GB and a SATA\/600 interface, it slots into standard servers, storage arrays, and workstations, enabling fast upgrades without a disruptive overhaul. Engineered for reliability, efficiency, and consistent performance, it helps accelerate analytics, cloud services, active archiving, and mission-critical databases while optimizing total cost of ownership through lower power consumption and cooler operation. Whether accelerating big data workflows, delivering responsive virtualized workloads, or powering dense deployments, this HPE SSD is designed to keep pace with modern data center demands.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eUltra-responsive performance for mixed workloads:\u003c\/b\u003e Delivers high IOPS and low latency across diverse tasks—from random reads to sequential writes—so analytical queries, BI dashboards, and transactional databases run faster and more smoothly. The intelligent controller and firmware optimize parallelism to sustain throughput as queue depths vary, helping applications meet strict service-level objectives without sacrificing reliability.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eEnterprise-grade reliability and endurance:\u003c\/b\u003e Engineered for continuous operation in demanding data-center environments, featuring robust error correction, wear leveling, and data integrity safeguards. Designed to minimize unplanned outages and provide predictable performance, making it well-suited for virtualization platforms and long-running workloads.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eEfficient power and cooling for lower TCO:\u003c\/b\u003e Optimized to reduce active power consumption and thermal output, supporting higher data density deployments and lower cooling costs. In cloud deployments and on-premise clusters, this efficiency translates to lower energy bills while maintaining strong performance.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eEasy deployment in standard 2.5-inch bays:\u003c\/b\u003e The familiar 2.5-inch form factor and SATA interface enable straightforward upgrades or expansions in servers, storage arrays, and workstations. It slots into common drive trays and backplanes for quick, non-disruptive installation with minimal configuration changes.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eOptimized for data-intensive tasks:\u003c\/b\u003e Ideal for big data analytics, cloud services, active archiving, database workloads, and data warehousing. By accelerating access to hot datasets and frequently accessed data, it supports faster insights, quicker transactions, and improved user experiences across analytics and business intelligence platforms.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eTechnical Details of HPE 480 GB Solid State Drive\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e 480 GB\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eForm Factor:\u003c\/b\u003e 2.5-inch internal drive\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eInterface:\u003c\/b\u003e SATA 6 Gb\/s (SATA\/600)\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eWorkload Type:\u003c\/b\u003e Mixed-use enterprise SSD\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eController\/Firmware:\u003c\/b\u003e Enterprise-grade controller and firmware designed for reliability, wear leveling, and data integrity\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eEndurance and Reliability:\u003c\/b\u003e Robust wear leveling and data integrity safeguards to support continuous operation in demanding environments\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003ePower and Cooling:\u003c\/b\u003e Optimized for reduced active power consumption and lower thermal output\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eDeployment:\u003c\/b\u003e Compatible with standard 2.5-inch bays in servers, storage arrays, and workstations\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eHow to install HPE 480 GB Solid State Drive\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cb\u003ePrepare the system:\u003c\/b\u003e Power down the server or workstation and disconnect it from the power source. Ground yourself to prevent static discharge.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eRemove or prepare the drive bay:\u003c\/b\u003e If replacing an existing drive, remove it from the backplane or tray. If adding, prepare an available 2.5-inch drive bay and corresponding backplane slot.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eInstall the drive:\u003c\/b\u003e Insert the 2.5-inch SSD into a compatible drive tray or backplane slot and secure it with screws or the tray’s mounting mechanism.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eConnect interfaces:\u003c\/b\u003e Attach the SATA data cable and power cable or connect to the server’s backplane for hot-swap backplane configurations. Ensure connectors are firmly seated.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003ePower up and configure:\u003c\/b\u003e Boot the system and enter the BIOS\/UEFI to verify the drive is detected. In the operating system, initialize, partition, and format the new drive as needed. Consider applying any available firmware updates for optimal performance and reliability.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eVerify and monitor:\u003c\/b\u003e Confirm the drive is operating correctly in the OS or virtualization layer and monitor health with your standard monitoring tools. Schedule regular firmware updates and health checks to maintain peak performance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cb\u003eQ: What is the capacity of this drive?\u003c\/b\u003e \u003cbr\u003eA: 480 GB.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eQ: What interface does it use?\u003c\/b\u003e \u003cbr\u003eA: SATA 6 Gb\/s (SATA\/600).\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eQ: What form factor is the drive?\u003c\/b\u003e \u003cbr\u003eA: 2.5-inch internal SSD suitable for standard drive bays in servers and workstations.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eQ: Is this drive designed for enterprise workloads?\u003c\/b\u003e \u003cbr\u003eA: Yes. It is described as an enterprise-grade mixed-use SSD with features like advanced wear leveling and data integrity safeguards for reliability in data-center environments.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eQ: What use cases is it best suited for?\u003c\/b\u003e \u003cbr\u003eA: Mixed-use workloads including big data analytics, cloud services, active archiving, databases, and data warehousing, where high IOPS, low latency, and consistent throughput are critical.\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eQ: Is the drive easy to install in existing systems?\u003c\/b\u003e \u003cbr\u003eA: Yes. The 2.5-inch SATA form factor simplifies upgrades in servers, storage arrays, and workstations with standard drive trays and backplanes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":46746825883874,"sku":"6235592","price":613.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9510\/9090\/files\/175291489.jpg?v=1755133583","url":"https:\/\/pegasussonline.com\/products\/hpe-480-gb-solid-state-drive-2-5-internal-sata-600-mixed-use-480gb-ssd","provider":"PEGASUSS ","version":"1.0","type":"link"}