2GB DRAM Kit (2 x 1GB) for Cisco - ASA5520-MEM-2GB

AxiomSKU: 5326966

Price:
Sale price$258.90

Description

2GB DRAM Kit (2 x 1GB) for Cisco ASA5520 - ASA5520-MEM-2GB

Upgrade your Cisco ASA 5520 Security Appliance with confidence using the 2GB DRAM Kit (2 x 1GB) from Axiom Networking. This memory kit is designed to deliver a seamless upgrade path for growing network environments, enabling your ASA5520 to handle more concurrent connections, heavier rule processing, and more complex VPN and logging workloads. The two matched 1GB DRAM modules are engineered for reliability, compatibility, and ease of installation, giving you a cost-effective way to extend the lifespan and performance of your Cisco security appliance.

  • Enhance firewall throughput and session handling by increasing total RAM to 2GB, allowing the ASA5520 to sustain higher connection counts and more active VPN tunnels without performance bottlenecks.
  • Includes two matched 1GB DRAM DIMMs (2 x 1GB) that are specifically designed for Cisco ASA memory slots, ensuring consistent timing, voltage, and reliability for Cisco hardware.
  • 100% tested by Axiom Networking to meet stringent compatibility standards with Cisco ASA devices, reducing the risk of memory incompatibility or instability in production environments.
  • Plug-and-play upgrade for Cisco ASA devices with straightforward installation steps, helping IT teams minimize downtime and complexity during memory expansion projects.
  • Supported by reliable customer service and technical documentation from Axiom Networking, providing installation guidance and post-purchase support for continued performance gains.

Technical Details of 2GB DRAM Kit (2 x 1GB) for Cisco ASA5520

  • SKU: ASA5520-MEM-2GB
  • Total capacity: 2GB (2 x 1GB DIMMs)
  • Memory type: DRAM DIMMs
  • Form factor: DIMM modules designed for Cisco ASA 5520 series
  • Compatibility: Cisco ASA 5520 Security Appliance and related ASA 5500-series devices with memory slots
  • Manufacturer: Axiom Networking

how to install 2GB DRAM Kit (2 x 1GB) for Cisco ASA5520

To ensure a safe and successful memory upgrade, follow these steps carefully. Always refer to Cisco maintenance guidelines for your specific ASA model and ensure you have an ESD-safe workspace before handling computer components.

  • Power down the Cisco ASA 5520 completely and disconnect all network cables, serial consoles, and power sources to prevent any electrical or static discharge during the installation.
  • Open the memory access panel on the ASA 5520 according to Cisco's service documentation, exposing the memory slots and ensuring you have clear access to the DIMM sockets.
  • Ground yourself using an anti-static strap or by touching a grounded metal surface to minimize static electricity before handling the DIMMs.
  • Handle the two 1GB DRAM DIMMs by the edges, avoiding contact with the gold contacts. Align the modules with the slot notches and gently insert them, applying even pressure until they are firmly seated and the locking tabs engage.
  • If upgrading from a single module to a 2x1GB kit, remove any existing memory as needed and install the two new DIMMs in the appropriate slots following the device’s memory configuration guidelines. If simply adding, insert into the available slots with proper orientation.
  • Reattach the memory access panel, reconnect power, and boot the ASA 5520. Access the management interface and verify that the system recognizes the full 2GB of RAM. Run a basic health check to confirm there are no memory errors.
  • Monitor the device during initial operation to ensure stability, and review system logs for any warnings related to memory. If problems arise, re-seat the modules or consult Axiom Networking support for guidance.

Frequently asked questions

  • Q: Is this memory kit compatible with Cisco ASA5520 and related models?

    A: Yes. This 2GB DRAM kit is specifically marketed for the Cisco ASA 5520 Security Appliance and is designed to work with the memory slots on that model. It provides a straightforward upgrade path for ASA devices requiring additional RAM.

  • Q: Will upgrading memory affect existing configurations?

    A: Upgrading DRAM is a hardware enhancement that does not alter existing configurations. After installation, the ASA management interface should report the new total RAM, and normal operation resumes with improved capacity for logging, VPNs, and rule processing.

  • Q: How do I verify the memory upgrade in the ASA 5520?

    A: After installation, access the ASA’s management console and review the system memory information to confirm the total RAM is shown as 2GB. You can also monitor memory utilization during peak loads to ensure the upgrade delivers the expected benefits.

  • Q: Is there any warranty or support for this memory kit?

    A: Axiom Networking provides product support and documentation for its memory kits. For warranty specifics, refer to your purchase documentation or contact Axiom Networking customer support to confirm coverage and terms.


Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed