2GB DRAM Kit (2x1GB) for Cisco - MEM-PRP2-2G

AxiomSKU: 5359899

Price:
Sale price$797.20

Description

2GB DRAM Kit (2x1GB) for Cisco - MEM-PRP2-2G

Upgrade your Cisco hardware with the 2GB DRAM Kit (2x1GB) MEM-PRP2-2G from Axiom Networking. This memory kit is purpose-built to boost performance on Cisco servers, switches, and other compatible devices, delivering a solid, cost-effective path to smoother multitasking, faster data handling, and extended hardware life. The kit comprises two 1GB memory modules that install into existing DIMM slots, providing a total of 2GB of additional RAM. These modules are designed for reliability and are tested for compatibility with Cisco systems, helping IT teams avoid memory-related issues during upgrades. Whether you’re refreshing aging equipment, supporting growing workloads, or optimizing network services, MEM-PRP2-2G is a dependable solution from a trusted supplier in networking memory.

  • Two 1GB memory modules for a total of 2GB — The kit offers a straightforward memory upgrade by combining two 1GB DIMMs to deliver 2GB of RAM, enabling Cisco devices to handle more concurrent processes, larger configurations, and smoother operation under heavier workloads.
  • Designed for Cisco hardware — Engineered to align with Cisco servers and switches, MEM-PRP2-2G fits the intended slots and timing expectations of Cisco platforms, reducing the risk of compatibility issues during upgrade projects.
  • Plug-and-play upgrade — Installation is typically simple: power down, insert the modules into the proper memory slots, and reboot. The device should recognize the new memory automatically without complex software changes.
  • 100% tested for reliability — Axiom Networking subjects each memory kit to comprehensive testing to ensure stability and compatibility with Cisco devices, helping to minimize memory-related errors and downtime.
  • Cost-effective upgrade with long-term value — This 2GB memory kit provides an affordable route to improved performance, delaying or avoiding the need for a full hardware refresh while extending the useful life of existing Cisco infrastructure.

Technical Details of 2GB DRAM Kit (2x1GB) MEM-PRP2-2G

  • Part number: MEM-PRP2-2G
  • Configuration: 2 x 1GB DIMMs
  • Total capacity: 2GB
  • Compatibility: Cisco servers and switches (validated for Cisco hardware memory requirements)
  • Manufacturer: Axiom Networking
  • Package contents: 2 x 1GB memory modules

How to Install 2GB DRAM Kit (MEM-PRP2-2G)

  • Power down the Cisco device and unplug it from power. Disconnect any peripherals and allow the system to cool before handling memory components.
  • Ground yourself to prevent static discharge, and open the chassis or memory access door according to the device’s service manual.
  • Identify the correct memory slots for the upgrade. Refer to the device’s documentation to locate the recommended slots for 2GB memory configurations and ensure you are adding modules in supported bank pairs.
  • Remove any existing modules if required by your upgrade plan, taking care to release retention clips and ease modules out without bending pins or causing damage.
  • Align the notches on the 1GB DIMMs with the keying in the memory slots and insert each module firmly until it seats with a definitive click. Ensure both modules are fully seated and the retention clips latch securely.
  • Repeat the process for the second module, confirming that both DIMMs are seated evenly and recognized by the system. Reassemble the chassis or memory cover.
  • Reconnect power and boot the device. Enter the system BIOS/firmware or Cisco device console to verify that the total memory now reflects 2GB. If required, consult the device’s memory configuration guide to confirm the memory map and slot population.
  • Run any available memory diagnostics or health checks to confirm stability under typical workloads and network traffic scenarios. Monitor for any memory-related error messages during initial operation.

Frequently Asked Questions

  • Q: What devices is MEM-PRP2-2G compatible with? A: MEM-PRP2-2G is designed for Cisco servers and switches that support a 2GB DDR-style memory upgrade using two 1GB DIMMs. Always verify compatibility with your specific Cisco model and firmware guidance before purchase.
  • Q: What is the total memory provided? A: The kit provides 2GB total, delivered as two 1GB DIMMs for flexible installation in appropriate Cisco memory slots.
  • Q: Do I need to update firmware or BIOS after installation? A: In most cases, no firmware or BIOS updates are required; the device should recognize the memory automatically. If you encounter recognition issues, consult Cisco device documentation or support for guidance relevant to your model.
  • Q: How can I verify the upgrade is working? A: After installation, check the device’s memory status in the BIOS/UEFI or through Cisco management interfaces to confirm that the system now reports 2GB of RAM. Run typical workloads to observe performance improvements and monitor for stability.
  • Q: What warranty or support is included? A: Warranty and support terms vary by retailer and region. Check the specific seller’s policy for MEM-PRP2-2G from Axiom Networking to understand coverage, return windows, and support options.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed