2N External 13.56MHz RFID Card Reader (Wiegand) – Dual-Sided Outdoor Access Control

Experience secure, convenient entry from both sides of a door with the 2N External 13.56MHz RFID Card Reader (Wiegand). This rugged secondary reader connects to your internal access control system, enabling two‑way card entry while preserving centralized management and reporting. Built for challenging environments, its IP68-rated enclosure protects sensitive electronics from water, dust, and extreme weather, ensuring reliable operation even in outdoor installations. With MIFARE card compatibility and standard Wiegand communication, this reader integrates seamlessly with most access control panels, making it ideal for offices, campuses, residential buildings, warehouses, and outdoor facilities where secure, two‑sided access is essential.

• Dual‑sided access control with seamless integration: The 2N external reader functions as a companion to your main internal reader, allowing occupants to grant or deny entry from either side of the door. This configuration reduces bottlenecks at entry points and enables flexible security workflows, such as controlled access for visitors or delivery personnel who may approach from the outside while authorized occupants gain entry from the inside. With support for common Wiegand formats, it complements a wide range of existing access control panels and door controllers, enabling straightforward installation and centralized management without changing your core security architecture.
• Rugged IP68 exterior enclosure for outdoor reliability: Designed for exterior use, the reader features a weatherproof, dustproof IP68-rated shell and proven seals that resist moisture ingress, UV exposure, and temperature cycles. Its robust construction helps prevent corrosion and physical wear in harsh environments, extending service life and reducing maintenance costs. The compact, vandal‑resistant form factor is suited for mounting on exterior walls, gate posts, or protected entryways, delivering dependable performance while preserving a discreet security footprint.
• MIFARE card compatibility with fast, reliable reads: This reader is engineered to read MIFARE cards, enabling quick, contactless authentication for a broad range of access control deployments. Whether you’re deploying legacy MIFARE Classic credentials or newer card technologies, the device delivers rapid detection to minimize entry delays during peak periods. By leveraging 13.56 MHz technology, the reader maintains stable performance in busy lobbies, outdoor approaches, and high-traffic facilities, helping facilities maintain smooth pedestrian flow without compromising security.
• Standard Wiegand interface for effortless integration: The external reader communicates with your door controller via a conventional Wiegand interface, providing compatibility with most access control panels on the market. Supporting common formats such as 26‑bit (and often 34‑bit configurations) reduces wiring complexity and integration risk, allowing easy pairing with your internal reader. This compatibility means you can expand capabilities, add a second verification point, or extend control across multiple doors without overhauling your security system.
• Easy installation and long‑term reliability: The unit is designed for straightforward mounting and robust, weather‑sealed connections. With simple wiring to the internal panel and a secure power supply, technicians can deploy the reader quickly and reliably. The IP68 enclosure protects against rain, dust, and temperature swings, while durable materials resist environmental wear. Routine maintenance is minimal—a clean exterior and periodic checks of seals and connectors are typically all that’s required to sustain peak performance over years of service.

Technical Details of 2N External 13.56MHz RFID Card Reader (Wiegand)

• Frequency: 13.56 MHz
• Card compatibility: Reads MIFARE cards
• Interface: Wiegand output; supports standard formats (26-bit and 34-bit configurations common in access control)
• Enclosure: IP68-rated rugged housing suitable for outdoor installation
• Power: Compatible with standard 12 V DC supply; designed for low power draw and reliable operation
• Environmental tolerance: Weatherproof and dustproof design engineered for outdoor use and harsh conditions
• Connectivity: Intended as a secondary reader that connects to an internal reader/controller to enable two‑sided access control

How to install 2N External 13.56MHz RFID Card Reader (Wiegand)

• Plan and verify compatibility: Confirm your main access control panel supports a secondary Wiegand reader and that MIFARE cards are your credential type. Review the panel’s wiring diagram for correct Wiegand key formats and any required termination.
• Prepare the mounting location: Choose a secure exterior mounting point that provides convenient access from both sides of the door while maintaining the reader’s line of sight to credentials. Ensure the surface is clean, dry, and capable of supporting the reader’s weight and mounting hardware.
• Mount the reader: Attach the external reader to the chosen surface using appropriate hardware. Ensure a tight fit to preserve IP68 protection and prevent water intrusion at mounting holes. Route cables through a weatherproof conduit or gasketed entry point to the building interior.
• Wiring and power: Connect the Wiegand data wires from the external reader to the corresponding input/output on the internal reader/door controller, following the manufacturer’s wiring diagram. Provide a stable 12 V DC power supply to the external unit and ground as required by your system to minimize electrical noise and ensure reliable operation.
• Seal, test, and document: Seal all cable entries with the supplied gaskets to maintain IP68 protection. Power on the system, enroll cards, and verify that reads are detected accurately from both sides of the door. Confirm that access events are correctly logged by the internal controller and that any alarm or tamper signals function as expected. Document wiring diagrams, serial numbers, and installation notes for future maintenance and audits.

Frequently asked questions

• Is the 2N External RFID Card Reader weatherproof? Yes. The IP68-rated enclosure is designed for outdoor installations, offering protection against rain, dust, and environmental exposure while maintaining reliability in challenging conditions.
• Can this reader work with any access control system? It is designed as a secondary reader that connects to an internal reader/controller via a standard Wiegand interface, making it compatible with many mainstream access control panels when properly configured.
• What card types does it read? It reads MIFARE cards, providing fast, contactless authentication for common security deployments.
• Does it support two-way access control? Yes. The external reader works in conjunction with the internal reader to enable or restrict entry from both sides of a door, depending on system configuration and door controller rules.
• What installation requirements are there? You’ll need a compatible power supply (typically 12 V DC), Wiegand wiring to the main panel, and a suitable mounting surface for outdoor use; ensure seals are properly installed to maintain IP68 protection.