Description
4GB DRAM Kit (2 x 2GB) for Cisco - M-ASR1002X-4GB
Upgrade your Cisco M-ASR1002X with confidence using the 4GB DRAM Kit from Axiom Networking. This memory upgrade delivers reliable, plug-and-play performance enhancements for Cisco routers and switches, helping to accelerate routing, firewalling, and multitasking workloads. Built to complement Cisco systems, this kit provides a seamless upgrade path for organizations seeking to improve throughput, reduce latency, and extend the life of their ASR 1000-X hardware.
- Key compatibility: 4GB total capacity provided by two 2GB memory modules, specifically designed to fit the Cisco M-ASR1002X-4GB upgrade configuration for the ASR 1002-X platform.
- Plug-and-play installation: Engineered for quick, tool-free upgrades with minimal downtime, so you can boost memory without complex downtime planning.
- Quality and reliability: 100% tested to ensure compatibility and dependable operation within Cisco environments, backed by Axiom Networking’s commitment to quality.
- Brand you can trust: From Axiom Networking, a trusted provider of Cisco-compatible DRAM, Flash cards, Flash SIMMs, and mini-Flash for Cisco servers, switches, and other hardware applications.
- Ideal use cases: Suited for high-traffic networks, virtualization tasks, and demanding applications running on Cisco ASR 1000-X series routers, helping maintain steady performance during peak loads.
Technical Details of 4GB DRAM Kit (2 x 2GB) for Cisco - M-ASR1002X-4GB
- Product type: DRAM memory kit
- Total capacity: 4GB
- Modules included: 2 x 2GB memory modules
- Compatibility: Cisco M-ASR1002X-4GB upgrade configuration; compatible with Cisco ASR 1002-X series hardware
- Manufacturer: Axiom Networking
- Application: Memory upgrade for Cisco routers and switches to improve performance and multitasking capabilities
How to install 4GB DRAM Kit for Cisco
Preparing for installation begins with safety and power considerations. Before you start, power down the Cisco device completely and disconnect from any power sources. Ground yourself to prevent static discharge, and work on a clean, static-free surface. Locate the memory slots on the Cisco M-ASR1002X motherboard or memory riser area as specified by your device’s service guide. Remove any existing memory modules if a replacement is required, or insert the new modules into the designated slots if you are performing an addition upgrade. Align the modules properly with the notches on the slots and firmly seat them until they are fully seated. Reassemble the chassis, reconnect power, and power on the device. Enter the system console to verify that the memory is recognized and that the total memory matches the expected 4GB. If your Cisco system supports POST or BIOS-level memory checks, run the memory verification to ensure there are no faults. With the upgrade complete, monitor system performance to confirm improvements in throughput and multitasking capabilities. If issues arise, reseat the modules and confirm compatibility with your specific Cisco firmware version and hardware revision.
Frequently asked questions
-
Q: What is included in the 4GB DRAM Kit for Cisco M-ASR1002X-4GB?
A: The kit includes two 2GB memory modules designed to increase the total RAM of the M-ASR1002X-4GB configuration, providing a 4GB total capacity ready for installation. -
Q: Is this memory upgrade compatible with all Cisco ASR 1002-X devices?
A: The kit is specifically designed for the M-ASR1002X-4GB upgrade configuration. For other Cisco ASR 1000-X models or configurations, please verify compatibility with your device’s service guide or contact Axiom Networking support. -
Q: How long does installation typically take?
A: Installation is usually quick, often completed within 5–15 minutes depending on your familiarity with the chassis and access to memory slots. Always follow the device’s service guidelines to avoid downtime. -
Q: Will this upgrade improve performance immediately?
A: Memory upgrades generally improve multitasking capabilities and peak-load handling, which can reduce paging and improve throughput. The exact performance gains depend on your workload, firmware, and network traffic patterns. -
Q: Do I need to update firmware after installing the new memory?
A: It’s recommended to ensure your Cisco device is running a compatible firmware version for optimal memory recognition and stability. Check Cisco release notes for any memory-related advisories and upgrade if required.
Customer reviews
Showing - Of Reviews