Description
4GB DRAM Upgrade for Cisco - N7K-SUP1-8GBUPG
Enhance the memory backbone of your Cisco Nexus 7000 series with this 4GB DRAM upgrade crafted for the N7K-SUP1 supervisor engine. Axiom Networking delivers a robust line of DRAM enhancements, Flash cards, Flash SIMMs, and mini-Flash solutions designed specifically for Cisco servers, switches, and related hardware. This upgrade is built to improve memory headroom, reduce processing bottlenecks, and sustain performance under heavier workloads, all while preserving the reliability and stability Cisco users rely on in data center environments. The memory module is tested for compatibility with Cisco systems, delivering a seamless upgrade path without the need for a full chassis replacement.
Designed to meet the exacting requirements of enterprise networks, the 4GB DRAM upgrade emphasizes consistent performance, long-term reliability, and straightforward deployment. By expanding the N7K-SUP1’s available memory, organizations can support larger routing tables, more ACLs and QoS policies, and an increase in virtualization-capable services that run on the control plane and data plane. Axiom Networking stands behind its products with a focus on quality and compatibility, ensuring that this upgrade integrates smoothly with Cisco NX-OS and the Nexus 7000 platform for steady operation in demanding data centers.
Whether your environment hosts multi-tenant workloads, virtualized network functions, or large-scale monitoring and analytics tasks, the extra DRAM can help mitigate latency caused by memory constraints and provide a more responsive management experience. This upgrade is a practical, cost-effective way to extend the life of existing Cisco hardware while preserving performance continuity during maintenance windows or growth phases. The memory module is manufactured under strict quality controls to meet the expectations of Cisco administrators who depend on stable, high-availability networking gear.
- Optimized for Cisco Nexus 7000 Series: A 4GB DRAM upgrade designed to boost memory headroom for routing tables, ACLs, QoS, and virtualization services, helping to maintain high throughput under heavier network loads.
- 100% tested for compatibility: Each module undergoes rigorous validation to ensure proper recognition by Cisco NX-OS and stable operation within the N7K-SUP1 platform, reducing the risk of compatibility issues.
- Simple, plug-and-play installation: Engineered for straightforward integration with your existing chassis, minimizing downtime and avoiding complex reconfigurations in many typical upgrade scenarios.
- Reliable, high-quality components: Built to rigorous manufacturing standards with attention to longevity and performance in data center networks, delivering dependable operation across extended service lifetimes.
- Supported by Axiom Networking: Access dependable technical support, clear documentation, and assistance tailored for Cisco customers and enterprise networks seeking reliable memory upgrades.
Technical Details of 4GB DRAM Upgrade for Cisco - N7K-SUP1-8GBUPG
- SKU: N7K-SUP1-8GBUPG
- Product type: DRAM memory upgrade
- Memory capacity: 4GB
- Form factor: DRAM module compatible with Cisco N7K-SUP1
- Compatibility: Cisco Nexus 7000 Series Supervisor Engine N7K-SUP1
- Manufacturer: Axiom Networking
- Condition: New
- Testing/Certification: 100% tested for Cisco NX-OS compatibility and N7K-SUP1 integration
how to install 4GB DRAM Upgrade for Cisco - N7K-SUP1-8GBUPG
Step 1: Power down the Cisco Nexus 7000 chassis following Cisco guidelines and disconnect from the power source. Ensure proper ESD precautions are observed before handling any components.
Step 2: Access the N7K-SUP1 memory area by removing the chassis access panel as per your equipment’s maintenance procedures. Locate the memory slots on the supervisor engine module and verify there is a suitable slot available for the 4GB DRAM upgrade.
Step 3: If required by your specific hardware configuration, carefully remove the existing memory module from its slot. Align the new 4GB DRAM upgrade with the slot, ensuring correct orientation and seating. Gently press until the module locks into place with the side latches.
Step 4: Resecure any panels, reconnect power, and boot the system. Access the Cisco NX-OS console to verify that the memory is detected and reported as available memory. Confirm the total memory matches the expected 4GB upgrade alongside any existing memory in the system.
Step 5: Run basic memory tests and monitor system behavior under expected workloads to confirm stability. If necessary, update firmware or NX-OS revisions to ensure optimal compatibility with the upgraded N7K-SUP1 module and the new memory configuration.
Frequently asked questions
- Q: What is included with the 4GB DRAM Upgrade for Cisco - N7K-SUP1-8GBUPG? A: The upgrade consists of a 4GB DRAM memory module designed for the Cisco Nexus 7000 Series Supervisor Engine N7K-SUP1; packaging may vary by seller, and additional mounting hardware is typically not required beyond standard installation accessories.
- Q: Is this upgrade compatible with the Cisco Nexus 7000 series? A: Yes. This memory upgrade is specifically designed for the N7K-SUP1 supervisor engine within Cisco Nexus 7000 platforms and is validated for such configurations.
- Q: Do I need to power down the system to install the upgrade? A: Yes. Follow Cisco guidelines for powering down and performing static-safe installation to avoid damage to the equipment and memory components.
- Q: Will the upgrade affect my warranty? A: Warranty details may vary by vendor and purchasing agreement. It is best to consult the seller’s warranty policy or contact Axiom Networking for exact terms related to memory upgrades for Cisco devices.
- Q: How can I verify the upgrade after installation? A: After installation and reboot, verify that the system recognizes the additional memory using the NX-OS show memory or show hardware commands, and confirm the total memory reported matches the expected 4GB upgrade in addition to any existing memory.
- Q: Is there any firmware or NX-OS prerequisite for this upgrade? A: In most cases, the upgrade is compatible with current NX-OS revisions for the N7K-SUP1, but it is advisable to verify with Axiom Networking or Cisco support if you operate on an older NX-OS version or require a specific firmware baseline.
Customer reviews
Showing - Of Reviews