Accortec 1.92 TB Solid State Drive - 2.5" Internal - SAS (12Gb/s SAS)

The Accortec 1.92 TB Solid State Drive delivers a powerful combination of speed, capacity, and reliability in a compact 2.5-inch form factor. Built for demanding environments—from enterprise data centers to performance-focused workstations—this SAS-based SSD accelerates data access, shortens latency, and provides ample room for operating systems, databases, and mission-critical applications. With a 12Gb/s SAS interface, it enables high-throughput data transfers and consistent performance under heavy workloads, helping your servers run cooler, faster, and more efficiently.

• Blazing SAS performance for demanding workloads: Leveraging a 12Gb/s SAS interface, this drive delivers high sequential throughput and robust random I/O performance, helping databases, virtualization platforms, and analytics pipelines respond with minimal delay. The architecture is optimized for sustained workloads, reducing bottlenecks in busy servers and storage arrays.
• Massive capacity in a familiar form factor: At 1.92 TB, you gain ample space to host operating systems, application data, virtual machines, and large datasets without resorting to multiple drives. The 2.5-inch internal footprint makes it a versatile upgrade for a wide range of server and workstation configurations, including backplane-backed systems and enterprise storage enclosures.
• Enterprise-grade reliability and endurance: Designed for continuous operation, this Accortec SSD incorporates advanced wear leveling, error correction, and robust data integrity features to help safeguard data over time. It’s built to withstand the rigors of 24/7 environments, delivering dependable performance day after day.
• Easy integration with SAS backplanes and servers: The 2.5" internal SSD format is universally compatible with many SAS controllers, HBAs, and backplanes found in servers and storage arrays. Plug-and-play in compatible systems minimizes downtime and simplifies scaling for growing workloads.
• Efficient and scalable storage for data centers: The drive emphasizes energy-efficient operation and thermally aware design, helping to reduce power consumption in dense server racks and data centers. Its capacity and performance make it suitable for boot drives, tiered caching, or primary storage in enterprise deployments.

Technial Details of Accortec 1.92 TB Solid State Drive

• Capacity: 1.92 TB
• Form Factor: 2.5" internal
• Interface: SAS 12Gb/s
• Drive Type: Solid State Drive (SSD)
• Usage: Internal drive for servers and workstations

how to install Accortec 1.92 TB Solid State Drive

To install the Accortec 1.92 TB SAS SSD, follow these general steps in a compatible SAS server or workstation. Always refer to your server’s hardware documentation for exact procedures and safety guidelines.

1. Power down the system completely and disconnect from all power sources. Disconnect any external peripherals and ensure that the server or workstation is safe to handle.

2. Open the chassis or access panel and locate an available 2.5" drive bay or tray appropriate for your SAS backplane. If your system uses a backplane, identify the correct slot and tray for hot-swap compatibility, if supported by your hardware.

3. Remove any existing drive from the target bay or prepare an empty tray for the new SSD. Align the Accortec drive with the tray rails and ensure the connector side is oriented toward the back of the system where the SAS interface will connect.

4. Secure the drive in the tray with the appropriate screws or retention mechanism. Connect the SAS data cable and the power/SAS backplane connector to the drive or to the backplane, following your system’s wiring conventions and cable routing guidelines to avoid obstruction or overheating.

5. Reinsert the drive tray into the chassis and close the enclosure or panel. Reconnect power and boot the system. Enter the server or RAID controller BIOS/firmware interface to verify that the new drive is detected and recognized as a valid storage device.

6. Initialize and format the drive if needed, and configure it according to your deployment plan. Consider updating the drive firmware if a newer release is available from Accortec or your vendor to ensure compatibility and the latest reliability enhancements.

7. Perform a brief health check after the system is fully back online. Monitor drive SMART attributes and controller reports to confirm normal operation and performance alignment with your workload requirements.

Frequently asked questions

• Q: What is the capacity of this drive?
  A: The Accortec SSD has a capacity of 1.92 TB, designed to provide substantial space for operating systems, applications, and data in enterprise environments.
• Q: What interface does the drive use?
  A: It utilizes a SAS 12Gb/s interface, which supports high-throughput data transfers and strong reliability in server and storage arrays.
• Q: What form factor is it?
  A: It is a 2.5-inch internal drive, making it compatible with a wide range of servers, storage enclosures, and backplanes that support 2.5" SSDs.
• Q: Is this drive suitable for data centers and enterprise workloads?
  A: Yes. The drive is designed for enterprise-grade use, offering robust performance and endurance suitable for databases, virtualization, and mission-critical applications in data centers.
• Q: How should I install or upgrade this drive?
  A: Refer to the installation steps above. Always ensure compatibility with your SAS controller/backplane, safely power down before installation, and follow your system’s firmware and RAID controller guidelines for initialization, formatting, and health monitoring.
• Q: Are warranty and support details available?
  A: Warranty and support terms vary by seller and region. Check the product page or your vendor’s policy for specific coverage, duration, and service options related to this Accortec SSD.