Accortec 300 GB 2.5" Internal SAS Hard Drive – 6Gb/s SAS

The Accortec 300 GB Hard Drive is engineered for speed, reliability, and efficiency in demanding data storage environments. As a compact 2.5" internal SAS drive, it delivers enterprise-grade performance for servers, storage arrays, and high-end workstations. Designed to meet the needs of professionals who require consistent I/O throughput, low latency, and robust uptime, this drive combines advanced SAS technology with a compact form factor to optimize rack space, power usage, and total cost of ownership. Whether you’re upgrading an aging server, building a new storage tier, or expanding a data center’s capabilities, the Accortec 300 GB SAS drive is a dependable choice that blends speed, endurance, and efficiency into a single, reliable solution.

• High-performance 2.5" internal SAS drive: Built for fast data access with a SAS 6Gb/s interface that minimizes bottlenecks and accelerates workloads across databases, virtualization, and I/O-intensive applications.
• Compact 300 GB capacity: A balanced capacity for operating systems, application data, scratch space, caches, and high-frequency read/write tasks—ideal for boot drives, tiered storage, and RAID configurations.
• Enterprise-grade reliability: Engineered for demanding environments with robust error correction, steady data integrity, and resilient operation under continuous load, helping to maximize uptime in data centers and enterprise IT.
• Efficient design for data centers: Optimized power consumption and thermal performance to reduce heat output and cooling costs, improving overall data-center efficiency while maintaining performance under sustained workloads.
• Easy integration and broad compatibility: Works seamlessly with servers, storage arrays, and enterprise workflows that support 2.5" SAS drives, enabling smooth RAID setups and scalable storage architectures.

Technical Details of Accortec 300 GB Hard Drive

• Capacity: 300 GB
• Form Factor: 2.5-inch internal drive
• Interface: SAS 6Gb/s
• Drive Type: Enterprise-grade SAS hard disk drive
• Usage: Suitable for servers, storage arrays, RAID configurations, and high-performance workstations

How to Install Accortec 300 GB Hard Drive

Installing the Accortec 300 GB SAS drive is straightforward and designed to fit common server and workstation chassis that support 2.5" drives. Follow these steps to ensure proper seating, connection, and configuration for reliable operation:

• Power down the system and disconnect all cables to ensure a safe installation environment.
• Remove the drive cage or tray from the server or workstation using the standard retention screws or tool-less mechanism, depending on your chassis model.
• Slide the Accortec 300 GB SAS drive into the 2.5" drive bay until it sits firmly against the backplane or mounting posts.
• Secure the drive with screws or latch the tray into place, ensuring there is no movement or vibration.
• Connect the SAS data cable and the power connector to the drive. Ensure cables are routed cleanly to avoid interference with fans or other components.
• Power on the system and enter the BIOS or system controller configuration utility to recognize the new drive. If needed, initialize and format the drive according to your storage plan (RAID controller configuration, logical drive creation, etc.).
• Configure the drive within your storage array or operating system, assign an appropriate drive letter or path, and implement any redundancy protections such as RAID mirroring or parity as required.
• Run a quick health check or SMART status test to verify the drive’s health post-installation, and monitor performance during initial workloads to confirm stable operation.
• Document the installation for asset management and future maintenance, noting the drive’s serial number, firmware version, and storage role within the system.

Frequently Asked Questions

What is the primary advantage of a 2.5" SAS hard drive?

2.5" SAS drives offer compact form factors, higher drive density in servers, and enterprise-grade reliability for sustained workloads. SAS interfaces (6Gb/s) provide better I/O performance, large concurrent read/write throughput, and advanced error correction compared to typical consumer SATA drives, making them well-suited for databases, virtualization, and high-availability storage environments.

Can I mix this drive with other SAS or SATA drives in the same server or RAID array?

Yes. The Accortec 300 GB SAS drive can be used alongside other SAS drives in compatible servers and RAID controllers. For optimal performance and data reliability, ensure your RAID controller supports SAS, review enclosure compatibility, and configure a consistent stripe size and RAID level across the array. Mixing SAS with SATA may reduce overall performance and complicate error recovery, so plan carefully.

Is 300 GB enough for a boot drive in a modern server?

For standalone boot drives or operating-system-only installations, 300 GB can be sufficient, especially when combined with data-tier storage or virtualization where the OS and essential services occupy a portion of the drive. In larger deployments and for databases or heavily virtualized environments, consider pairing this drive with larger capacity back-end storage or using it as a high-speed cache or OS drive within a RAID array.

What maintenance steps are recommended to maximize life and reliability?

Regular firmware updates from Accortec or the drive manufacturer, periodic SMART checks, and monitoring of drive health through your RAID controller or monitoring software help detect issues early. Maintain proper airflow and avoid overheating, ensure the drive is properly seated in its bay, and perform routine fleet-level health checks to catch early signs of wear or impending failures.

What kind of workloads is this drive best suited for?

The Accortec 300 GB SAS drive is ideal for enterprise workloads requiring fast random I/O and consistent throughput, including databases, virtualization hosts, application servers, and high-demand storage tiers. It supports environments where reliability, quick recovery, and low latency are critical for maintaining service levels and delivering responsive performance to end users.