Accortec Ethernet 10Gb 2-Port 530T Adapter

Experience peerless performance and scalable networking with the Accortec Ethernet 10Gb 2-Port 530T Adapter. This high-speed PCI Express x8 plug-in card delivers two independent 10 Gigabit Ethernet channels over copper RJ-45 connections, designed to accelerate data-center workloads, virtualization, and storage traffic. Built for reliability in demanding environments, the 530T is purpose-built to optimize throughput, reduce latency, and simplify expansion—while keeping installation flexible across a wide range of server chassis thanks to its low-profile, full-height bracket compatibility.

• Dual 10GBASE-T ports – Enjoy two dedicated 10 Gigabit Ethernet links in a single PCIe card. Each port supports full-duplex operation, delivering up to 10 Gbps of throughput per port for bandwidth-intensive applications such as hyper-converged infrastructure, large-scale backups, live migration, and fast data replication.
• PCI Express x8 architecture – The Accortec 530T leverages a PCIe x8 interface to maximize host bandwidth and minimize CPU overhead, ensuring smooth data transfer between the server and network. This design is optimized for modern servers and virtualization workloads, helping to maintain low CPU utilization even under heavy network traffic conditions.
• Flexible form factor – Designed for broad deployment, the card is compatible with both low-profile and standard full-height chassis. This flexibility makes the 530T suitable for data centers, racks, and tower servers alike, simplifying inventory and deployment across mixed environments.
• Copper RJ-45 10GBASE-T connectivity – The 530T uses copper twisted-pair cabling with 10GBASE-T support, enabling high-speed networking over standard Cat6a/Category 7 cables. This eliminates the need for optics for most LAN, storage, and HPC connections, reducing overall cost and complexity while enabling longer reach where necessary.
• Reliability, compatibility, and ease of deployment – Built to integrate with mainstream server operating systems and virtualization platforms, the 530T emphasizes stability and straightforward deployment. Expect robust driver support, straightforward driver installation, and dependable performance across diverse workloads and network topologies.

Technical Details of Accortec Ethernet 10Gb 2-Port 530T Adapter

• Interface: PCI Express (PCIe) x8
• Ports: 2 x 10 Gigabit Ethernet (RJ-45)
• Network Speed: 10 Gbps per port (two ports; up to 20 Gbps aggregate in full-duplex operation)
• Cable Type: Twisted Pair (10GBASE-T copper)
• Form Factor: Low-profile, Full-height bracket compatible
• Model/Series: Accortec 530T Adapter
• Standards: 10GBASE-T copper Ethernet; backward compatible with lower-speed Ethernet
• Power and Thermal: Designed for reliable operation in standard server environments with efficient power usage and cooling

how to install Accortec Ethernet 10Gb 2-Port 530T Adapter

• Power down the host server and unplug all power sources before handling any hardware components.
• Open the server chassis and locate an available PCI Express slot that matches the card’s specifications. The 530T uses a PCIe x8 interface for optimal performance.
• Insert the card firmly into the PCIe slot until it is seated completely. If your chassis supports both low-profile and full-height installation, ensure the correct bracket is mounted to match your system form factor.
• Secure the card to the chassis using the appropriate screw at the rear of the expansion slot to prevent movement during operation.
• Attach two RJ-45 network cables to the card’s two 10GBASE-T ports. Route cables neatly to avoid interference and ensure a clean airflow path inside the chassis.
• Power on the server and install the appropriate drivers for your operating system. Consult Accortec support resources or your OS vendor for the latest 10GBASE-T drivers compatible with PCIe adapters.
• Verify network interfaces in the operating system, assign IP addresses as needed, and configure any required network teaming or virtualization settings to maximize throughput and reliability.
• Optionally update the card’s firmware if an update is provided by Accortec, following the vendor’s instructions to minimize downtime and ensure compatibility with newer features.

Frequently asked questions

• What speeds does the Accortec 530T support? The card offers two independent 10 Gigabit Ethernet ports, delivering up to 10 Gbps per port. In dual-port operation, total potential bandwidth can reach up to 20 Gbps in full-duplex conditions, depending on network infrastructure and system capabilities.
• What cabling is recommended? Use copper twisted-pair cabling that supports 10GBASE-T, typically Cat6a or Cat7. These cables provide the necessary bandwidth and reduction of crosstalk to achieve stable 10 Gbps connections over copper.
• Is this card compatible with my server chassis? Yes. The 530T is designed for broad deployment with a low-profile form factor and a full-height bracket option, enabling compatibility with a wide range of rack-mounted and tower servers. Check your chassis clearance and bracket options before purchase.
• Which operating systems are supported? Driver availability may vary by OS. The 530T is supported by common server OS families, including major Linux distributions and Windows Server editions, with drivers provided by Accortec or the OS vendor. Always verify which driver version is recommended for your environment.
• Can I use this card for virtualization or storage networks? Yes. The two 10GBASE-T ports are well-suited for high-throughput workloads such as VM migration, live storage replication, backup acceleration, and hyper-converged infrastructure, where low latency and predictable bandwidth are essential.
• Do I need a separate management NIC? Not necessarily. The 530T functions as a standard PCIe network adapter with two 10GBASE-T ports. Depending on your network design, you may configure NIC teaming, management networks, or separate data plane networks as required by your infrastructure.