Accortec Ethernet SFP+ SR Optic — 10GbE Short-Range Fiber Transceiver for High-Speed Data Centers

The Accortec Ethernet SFP+ SR Optic is engineered to elevate data networking with a compact, plug-and-play 10 Gigabit Ethernet transceiver designed for short-range multi-mode fiber links. This SFP+ SR optic enables high-bandwidth uplinks and interconnects between switches, servers, and storage devices, delivering reliable, low-latency performance in data centers, campus networks, and enterprise environments. Built to conform to industry standards and widely compatible with leading switches and NICs, this optic ensures seamless integration into existing infrastructures while offering robust speed, precision, and efficiency.

• 10 Gigabit Ethernet connectivity in a compact SFP+ form factor. The Accortec SR optic supports 10 Gbps data rates, making it ideal for server-to-switch uplinks, inter-switch connections, and high-throughput storage networks. Its small footprint means you can maximize port density in dense data center racks without sacrificing performance.
• Short-range MMF optical link with 850 nm VCSEL technology. Designed for short-range, high-bandwidth links, this transceiver uses a high-efficiency 850 nm VCSEL source optimized for multimode fiber (MMF) applications. It is well-suited for racks, blade enclosures, and top-of-rack (ToR) deployments where fiber runs are modest in length but demand peak performance.
• Plug-and-play, hot-swappable SFP+ module with broad compatibility. The Accortec SR optic follows Multi-Source Agreement (MSA) standards for SFP+ hot-plug compatibility, enabling quick field swaps and minimal downtime. It’s designed to work across a range of switches, routers, and NICs from major vendors, reducing integration friction and accelerating deployment timelines.
• Energy-efficient design with reliable performance. This optic emphasizes efficient power usage and stable operation, helping to keep equipment cool in dense data-center racks. With solid thermal characteristics and consistent throughput, it supports sustained 10G performance under typical data-center workloads.
• Versatile use cases for data centers, campuses, and enterprise networks. Ideal for 10G uplinks, disk-subsystem connections, virtualized environments, and high-speed server interconnects, the Accortec SR optic delivers predictable latency and solid error-free transmission across MMF fiber networks.

Technical Details of Accortec Ethernet SFP+ SR Optic

• Data rate: 10 Gbps (10GBASE-SR performance for short-range MMF links).
• Transceiver form factor: SFP+ hot-plug transceiver module for easy installation and replacement.
• Wavelength: 850 nm (VCSEL) optimized for multimode fiber networks.
• Fiber type: Multi-mode fiber (MMF), best suited for 50/125 μm MMF cables such as OM3/OM4 standards when used in SR applications.
• Connectors: LC duplex connector commonly used with MMF installations.
• Reach (typical): Up to several hundred meters on MMF; commonly up to 300 m on OM3 and up to 400 m on OM4, depending on fiber quality and system margins.
• Standards and compatibility: Complies with 10GBASE-SR and SFP+ MSAs, designed for broad interoperability with a wide range of switches and NICs.
• Operating conditions: Built to perform in standard data-center environments with reliable link integrity across typical temperature and humidity ranges (exact operating range may vary by supplier and chassis).

how to install Accortec Ethernet SFP+ SR Optic

• Power down the device or confirm that your system supports hot-swappable SFP+ modules before installation.
• Hold the SFP+ SR optic by its edges and align it with the SFP+ slot in your switch, router, or network device. Gently insert until the module seats and the locking mechanism engages.
• Connect the fiber optic cable to the LC duplex connector, ensuring the correct fiber type (MMF, typically OM3/OM4) and proper connector orientation. Avoid excessive bending and protect fiber from sharp bends.
• Power up the device (if you powered down) and verify link status through the device’s LED indicators or management interface. A solid or blinking link LED typically confirms a successful connection.
• Configure the port for 10G operation as needed in your switching or NIC settings, then run basic connectivity tests (link test, throughput test, and, if applicable, VLAN or QoS configurations) to ensure optimal performance.

Frequently asked questions

• What is the Accortec Ethernet SFP+ SR Optic used for? It is a 10 Gbps short-range transceiver designed for MMF fiber links in data centers and enterprise networks, enabling high-speed connections between switches, servers, and storage appliances.
• Is this SFP+ SR module compatible with most switches? Yes. SR optics built to the SFP+ standard are typically compatible with a wide range of switches and NICs that support 10GBASE-SR. Always verify vendor compatibility notes for your specific chassis and firmware version.
• What type of fiber should I use? Use multimode fiber, commonly 50/125 μm MMF such as OM3 or OM4. The SR optic is optimized for short-range links on MMF with an 850 nm transmitter.
• How do I know if the link is working? Check the device LED indicators for link status and activity. If the link is up but there is no traffic, verify configuration (speed, duplex, and VLAN settings) and run a throughput test to confirm performance.
• Can I mix this module with copper or other fiber types? It is specifically designed for 10GBASE-SR MMF links. Do not mix with single-mode fiber (SMF) or copper-based 10G solutions; ensure fiber type and connectors match the SR module’s specifications.