Description
The Accortec Sfp Module Pan Plus Sr Comp Xcvr is a versatile 10 Gigabit Ethernet transceiver designed to meet the demanding needs of modern data networking, data centers, campus networks, and service provider edge deployments. Built for scalability, reliability, and seamless integration, this SFP+ transceiver delivers crisp, low-latency performance across a wide range of fiber optic links. It supports hot-swappable operation, industry-standard interfaces, and diagnostic capabilities to help network engineers simplify deployment, optimize link budgets, and maximize uptime in commercial and enterprise environments.
- High-speed 10 Gbps performance: Enables full-duplex 10GigE links for latency-sensitive applications, virtualization, large-scale storage traffic, and rapid backups with minimal jitter and packet delay variations.
- Broad fiber compatibility with LC duplex connectors: Designed to work with both multimode (MMF) and single-mode (SMF) fiber, supporting short-reach data center fabrics as well as long-haul metropolitan networks using standard LC duplex interfaces.
- SKU-dependent wavelength options: Choose SR for MMF (short-range, typically ~850 nm) or LR/ER for SMF (long-range variants, typically ~1310 nm for LR and ~1550 nm for ER), enabling flexible reach and cost-effective upgrades across vendor platforms within a single form factor.
- Digital Diagnostics Monitoring (DDM) for proactive maintenance: Real-time visibility into critical parameters such as temperature, laser bias current, transmitted and received power, and supply voltage to help manage link quality and maintenance windows.
- Easy installation and broad interoperability: Engineered for straightforward deployment in standard SFP+ slots, supports hot-swapping to minimize downtime, and adheres to Multi-Source Agreement (MSA) specifications to maximize interoperability across diverse vendor networks.
Technical Details of Accortec SFP+ Module
- Form factor: SFP+ transceiver module
- Data rate: 10.0 Gbps (10 Gigabit Ethernet)
- Wavelength options: SKU-dependent (SR ~ 850 nm for MMF; LR ~ 1310 nm; ER ~ 1550 nm for SMF)
- Fiber type compatibility: MMF and SMF supported
- Connector: LC duplex
- Distance capabilities: SR up to ~300 meters on MMF; LR up to ~10 kilometers on SMF (typical values; consult SKU for exact reach)
- DDM (Digital Diagnostics Monitoring): Yes
- Operating temperature: Commercial grade typically 0°C to 70°C; extended temperature SKUs may offer -40°C to 85°C
- Power consumption: Generally under 1 watt under typical operating conditions
- Regulatory compliance: MSA-compliant, IEEE 802.3-2012/2018 standards, RoHS compliant
- Compatibility notes: Broad vendor interoperability; consult SKU for exact reach and compatibility across platforms
how to install Accortec SFP+ Module Pan Plus Sr Comp Xcvr
- Power down or plan for hot-swappable deployment: If your device supports hot-swapping, you can insert or remove the module with the system powered down or while the system is on, depending on your equipment’s capability and safety guidelines.
- Locate the SFP+ slot: Find an available SFP+ slot in your switch or router that supports 10 Gigabit Ethernet transceivers and is compatible with SFP+ modules.
- Insert the module securely: Align the module with the slot and gently push until it seats firmly. Do not force the module; ensure the latch engages to secure the module in place.
- Connect the fiber cable: Attach an LC duplex fiber patch cord appropriate for the chosen wavelength (SR for MMF or LR/ER for SMF). Ensure proper polarity and tighten connector ferrules to prevent signal loss.
- Verify link and health: Power up the device (if applicable) and check the port status. Use the device’s management interface to confirm link status, speed negotiation, and, if available, enable DDM monitoring for ongoing health data.
Frequently asked questions
-
What networks is the Accortec SFP+ Module Pan Plus Sr Comp Xcvr suitable for?
This SFP+ module is designed for a wide range of environments, including data centers, campus networks, and service provider edges. It supports high-density 10 Gigabit Ethernet links and is compatible with both MMF and SMF fiber, making it adaptable for short-reach intra-data center fabrics as well as longer metropolitan links.
-
Which wavelength should I choose?
Wavelength options are SKU-dependent. If you are using multimode fiber, SR variants (~850 nm) are typical. For single-mode fiber, LR (~1310 nm) or ER (~1550 nm) variants are available. Match the wavelength to your fiber type and reach requirements, and confirm compatibility with your switching gear.
-
What is the typical reach for SR and LR versions?
SR versions typically reach up to about 300 meters on MMF, suitable for data center intra-rack or intra-fabric connectivity. LR versions can cover roughly up to 10 kilometers on SMF. Exact reach depends on SKU, fiber type, and link budget; consult the product SKU documentation for precise figures.
-
Does the module support diagnostics?
Yes. The module includes Digital Diagnostics Monitoring (DDM), offering real-time data on temperature, laser bias current, transmitted power, received power, and supply voltage. This enables proactive maintenance and faster fault isolation.
-
Is the module hot-swappable?
Yes. The Accortec SFP+ Module is designed for hot-swapping in standard SFP+ slots, minimizing downtime during upgrades or maintenance. Always follow your equipment vendor’s guidelines when performing hot-swaps.
-
What standards and compliance does it meet?
The module is MSA-compliant and adheres to IEEE 802.3-2012/2018 standards for 10 Gigabit Ethernet. It is RoHS compliant, ensuring a broad measure of environmental responsibility and compatibility with typical enterprise and data center requirements.
Customer reviews
Showing - Of Reviews
