Acer EC.K1700.001 Replacement Lamp

Refresh your Acer projector with the Acer EC.K1700.001 Replacement Lamp, a genuine, high-performance 230 W P-VIP lamp designed to restore brightness, color accuracy, and overall image quality. This lamp is built to be a direct replacement for the original lamp in compatible Acer projector models, delivering dependable performance and a consistent visual experience. With a standard life of 2500 hours and an extended economy mode offering up to 4000 hours, this replacement lamp gives you flexibility to balance brightness and longevity depending on your projection needs. Whether you’re delivering a business presentation, teaching a class, hosting a conference, or enjoying a movie at home, this lamp helps maintain sharp text, vibrant colors, and clear contrast across a wide range of content.

• Key specifications at a glance: 230 W projector lamp, P-VIP type, standard life up to 2500 hours, economy mode up to 4000 hours, designed to replace the original lamp in Acer projectors. This means you can restore brightness and consistency without changing your projector hardware.
• Bright, accurate image quality: The 230 W P-VIP lamp delivers solid, reliable brightness with stable color reproduction and uniform illumination. Expect crisp text during slides, vivid color in multimedia presentations, and clear detail in photos and video, all ensuring your message comes through clearly even in mid-size rooms.
• Reliability you can count on: Crafted to meet the same safety and performance standards as the original lamp, this replacement module supports dependable operation under typical projector usage. It’s designed for long-term use in classrooms, offices, and home theater setups where consistent output matters most.
• Economical and flexible: The economy mode extends lamp life up to 4000 hours, giving you lower replacement frequency and reduced downtime when you don’t need maximum brightness. This makes it a smart choice for installations that prioritize longevity and efficiency, such as conference room setups during long days of presentations or educational environments with frequent use.
• Easy replacement and compatibility: Specifically aligned to replace Acer EC.K1700.001 original lamp modules in compatible projectors, this lamp simplifies maintenance. A straightforward swap minimizes downtime and helps you keep your projection system ready for use with minimal disruption to meetings, classes, or events.

Technical Details of Acer EC.K1700.001 Replacement Lamp

• Wattage: 230 W
• Lamp Type: P-VIP
• Standard Life: Up to 2500 hours
• Economy Life: Up to 4000 hours
• Replacement For: Acer projectors that require EC.K1700.001 replacement lamp

How to Install Acer EC.K1700.001 Replacement Lamp

To ensure safe handling and proper operation, follow these general steps for installing the Acer EC.K1700.001 replacement lamp. Always refer to your projector’s user manual for model-specific instructions and lamp replacement precautions.

Step 1: Power off the projector and unplug the power cord. Allow the unit to cool completely, as the lamp and housing can become extremely hot during use. This helps prevent burns and damage to the projector components.

Step 2: Locate and remove the lamp access panel. Depending on your model, you may need to unscrew a couple of screws or release a latch to gain access to the lamp housing. Keep track of screws and ensure the panel is set aside safely.

Step 3: Carefully disconnect the old lamp from its connector and gently slide the lamp out of its housing. Avoid touching the lamp glass with bare hands, as oils from skin can shorten lamp life or cause hot spots during operation.

Step 4: Align the replacement lamp with the seating guides and connect it securely to the electrical connector. Push the lamp into place until it is firmly seated, then reattach any retaining screws or fasteners as required by the projector model.

Step 5: Replace the lamp access panel and tighten screws if applicable. Reconnect the projector to power, but do not turn it on yet. Some models require lamp timer resets after replacement—check your projector’s manual for instructions on resetting the lamp timer to ensure accurate life tracking.

Step 6: Power on the projector and run a test image. Confirm that brightness levels are consistent across the screen, that there are no unusual flickers, and that color balance appears stable. If needed, perform a quick color and focus adjustment using the projector’s built-in settings to optimize image quality after replacement.

Step 7: Properly dispose of the old lamp according to local regulations and your facility’s waste management guidelines. Used lamps may contain materials that require safe handling.

Frequently asked questions

• Q: What is the lifespan of the Acer EC.K1700.001 replacement lamp in standard mode? A: The lamp offers up to 2500 hours in standard mode, providing reliable performance for typical daily projections and presentations.
• Q: How long does the lamp last in economy mode? A: In economy mode, you can expect up to 4000 hours of operation, extending intervals between replacements when maximum brightness is not required.
• Q: Is this replacement lamp compatible with all Acer projectors? A: It is designed to replace the original lamp in compatible Acer projector models that require the EC.K1700.001 lamp. Always verify your projector’s model number and lamp type to ensure a precise match.
• Q: Will using economy mode affect image brightness? A: Yes. Economy mode typically reduces maximum brightness in order to extend lamp life. This trade-off is intentional, enabling longer service intervals when ultra-bright output is not necessary.
• Q: Do I need to reset the lamp timer after installation? A: Many projectors require lamp timer resets after replacing the lamp. Consult your projector’s manual for model-specific steps to reset the lamp timer and correctly track usage in the device’s firmware.