AddOn 10/100/1000Base-TX(RJ-45) to Open SFP Port Media Converter

The AddOn 10/100/1000Base-TX(RJ-45) to Open SFP Port Media Converter is your gateway to flexible, future-ready networking. Designed for businesses that need to push beyond the limitations of standard copper cabling, this high-performance media converter bridges copper Ethernet and fiber with an open SFP port. It unlocks the ability to extend distances, improve network resilience, and optimize performance without overhauling your existing infrastructure. Whether you’re building a campus backbone, expanding a data center edge, or linking remote sites, this device delivers reliable copper-to-fiber connectivity in a compact, budget-friendly package. With an open SFP slot that accepts a wide range of transceivers, you can tailor your deployment to the exact distance and medium required, ensuring efficient utilization of your fiber portfolio and reducing total cost of ownership.

• Flexible copper-to-fiber bridge: One RJ-45 10/100/1000Base-TX port pairs with an open SFP slot, enabling seamless conversion between copper Ethernet and fiber media for exceptional network reach and versatility.
• Plug-and-play, unmanaged simplicity: No complex configuration needed—just connect, power, and go. This media converter delivers instant compatibility with a wide range of devices, switches, and routers, making deployment fast and frustration-free.
• Open SFP slot for modular versatility: Install your preferred SFP module (sold separately) to match your distance, medium, and protocol requirements—SX/LX/ZX or CWDM/TWDM variants for single-mode or multimode fiber, depending on your fiber plant.
• Enhanced network reach and resilience: Extend your Ethernet network beyond copper limits, reduce cabling costs, and improve fault tolerance by placing fiber links where they matter most—between buildings, data centers, and remote offices.
• Durable, compact design with broad compatibility: Built to endure in demanding environments, the device fits neatly on a desktop or with mounting options, supporting a clean, enterprise-grade deployment without unnecessary bulk or complexity.

Technical Details of AddOn 10/100/1000Base-TX(RJ-45) to Open SFP Port Media Converter

• Ports: 1 x RJ-45 10/100/1000Base-TX copper port and 1 x open SFP port for fiber transceivers (SFP module sold separately)
• Standards and compatibility: Compliant with IEEE 802.3, 802.3u, 802.3ab for copper, with SFP module compatibility for 1000Base-SX/LX/ZX and other gigabit fiber standards as supported by the installed SFP module
• Throughput: Line-rate performance to support full-wire-speed transmission for typical copper-to-fiber bridging scenarios, ensuring low latency and minimal buffering
• Power and power consumption: External DC power input; designed for reliable operation in typical office and data-center environments; adapter included with standard AC input
• Construction and mounting: Compact metal enclosure suitable for desktop placement or rack-mounting with compatible accessories; passive cooling for reliability in everyday deployments

how to install AddOn 10/100/1000Base-TX(RJ-45) to Open SFP Port Media Converter

Installing this media converter is a straightforward process that minimizes disruption while delivering immediate benefits in network flexibility. Follow these steps to establish a copper-to-fiber connection quickly and reliably:

• Plan your link: Identify the endpoints and determine the appropriate SFP module for the fiber link. Select a module that matches the fiber type (multimode or single-mode) and the distance you need to cover.
• Install the SFP module: Power off the devices you’ll connect, then insert the chosen SFP module into the open SFP port until it seats firmly. Ensure the module is compatible with the device and supports the desired wavelength and distance.
• Connect copper equipment: Plug a Cat5e/Cat6 Ethernet cable into the RJ-45 port of the media converter and connect the other end to your network device (switch, router, or NIC) that will speak Gigabit Ethernet over copper.
• Connect fiber to the SFP module: Attach the fiber optic cable from your remote device to the installed SFP module. Verify the connector type (LC, SC, etc.) and ensure the fiber is clean and properly terminated for optimal signal integrity.
• Power up and verify: Connect the power adapter and power on the media converter and the connected devices. Check the LED indicators to confirm link status, activity, and power. Perform a basic throughput test or ping test to confirm the link is active and stable.

Frequently asked questions

Q: What problem does the AddOn Open SFP Port Media Converter solve?

A: It enables flexible, cost-effective expansion of a network by bridging copper Ethernet over RJ-45 with fiber via an open SFP port. This is ideal for extending distances between buildings, upgrading edge networks, and integrating fiber into existing copper-based infrastructure without replacing entire switches or routers.

Q: Do I need to configure this device?

A: No configuration is required. It is an unmanaged media converter designed for plug-and-play operation. Simply install the SFP module, connect the copper and fiber links, and power it up—the device will facilitate seamless data transfer between copper and fiber at Gigabit speeds.

Q: What SFP modules are compatible with the open slot?

A: The open SFP port accepts standard SFP transceivers that support 1000Base gigabit fiber. Compatibility depends on the installed SFP module’s type (multimode vs single-mode) and the distance requirements of your link. SX, LX, ZX, CWDM, and DWDM variants are common choices; verify your fiber plant and distance before purchase.

Q: How far can I extend the network with this converter?

A: The maximum distance is dictated by the SFP module you install. Multimode fiber links typically cover shorter distances (hundreds of meters to a few kilometers, depending on the module and fiber), while single-mode fiber can reach much farther. Always refer to the SFP module specifications for exact reach and loss budgets.

Q: Is this device suitable for data centers or high-density deployments?

A: Yes, it is well-suited for edge deployments, campus networks, and data-center interconnects where copper-to-fiber bridging is needed. Its compact form factor and unmanaged design make it ideal for spaces where quick, scalable extension of network reach is required without additional management overhead.

Q: Does the media converter support PoE or PoE+?

A: The typical AddOn copper-to-fiber media converter described here does not provide PoE or PoE+ power to connected devices. If your deployment requires PoE, plan accordingly with PoE-capable switches or injectors located appropriately in your network path.

Q: How do I ensure optimal performance and reliability?

A: Use high-quality Cat5e/Cat6 copper cables, select appropriate SFP modules for your fiber type and distance, and maintain clean, well-terminated fiber connections. Keep the unit in a stable environment within its operating specifications, and avoid exposing it to excessive heat or moisture. Regularly inspect connections for dust, dirt, and alignment to sustain peak performance.

Q: Can I install this converter in a rack or on a wall?

A: Depending on the model’s enclosure and any included mounting accessories, it can be placed on a desktop or mounted in a rack or wall-mount setup. Refer to the product’s mounting guide and ensure you have the compatible brackets if you intend to rack-mount or wall-mount the unit.

Q: Where can I purchase compatible SFP modules?

A: SFP modules are sold separately and are widely available from networking equipment suppliers. To match your distance and fiber type, choose an SFP module that supports the 1000Base standards and is compatible with your fiber plant. Always verify compatibility with your devices and the specific SFP module’s warranty terms.