Advantech Wireless IoT Node with SMA Connector and Antenna

The Advantech Wireless IoT Node with SMA connector and antenna is a purpose-built edge device designed to empower scalable, reliable IoT deployments across remote and industrial environments. This compact node delivers steady wireless communication at a precise 0.25 Mbit/s, making it ideal for sensor networks, environmental monitoring, asset tracking, and telemetry where low power, rugged performance, and flexible power options matter most. Built to endure the demands of real-world deployments, the node pairs an efficient radio front end with an easy-to-integrate SMA antenna interface, enabling you to tailor coverage and range to your exact installation needs.

Key to its versatility is the ability to draw power from multiple sources. Whether you’re powering it from a USB DC supply inside a facility, running on a compact battery in a remote site, or harvesting energy via a solar panel in off-grid locations, this IoT node is designed to maximize uptime with minimal maintenance. This multi-source power approach reduces the need for frequent battery replacements and service visits, helping you keep your sensor network running smoothly and cost-effectively even in hard-to-reach areas.

At the heart of the Advantech Wireless IoT Node is a low-power radio technology that prioritizes efficiency without sacrificing reliability. The design targets efficient data transmission for simple, repetitive telemetry tasks, status updates, and control signals. In receiving mode, the device consumes a remarkably low 4.5 mA while listening for packets, which helps extend battery life and lower operating costs. When transmitting, the current draw remains impressively modest: about 5.4 mA at 0 dBm and 9.7 mA at 8 dBm. These figures demonstrate a thoughtful balance between range, data integrity, and energy consumption—critical factors for any long-duration IoT deployment.

The SMA connector and attached antenna are more than just a physical interface—they are a gateway to reliable, tailored wireless coverage. The SMA interface supports a range of external antennas, allowing you to optimize the link budget for your environment. Whether you’re deploying in an urban canyon, a rural expanse, or within a factory floor with metal obstructions, the antenna system enables you to select the best solution for your signal path, improving reliability and reducing data loss in challenging conditions.

For developers and integrators, the node delivers a straightforward path to field deployment. Its 0.25 Mbit/s data rate is well-suited for frequent, small payloads typical of IoT sensing and telemetry, while keeping power consumption in check. This makes the device an excellent match for battery-powered sensor nodes, remote irrigation controllers, cold chain monitors, and predictive maintenance sensors that need to transmit concise updates without draining their power reserves. The overall design emphasizes simplicity, durability, and ease of integration with gateways, cloud services, and asset-management platforms.

In short, the Advantech Wireless IoT Node with SMA connector and antenna is a complete, practical solution for edge computing and wireless sensing. It brings together flexible power options, industry-leading low-power radio performance, and a robust physical interface to external antennas. If your project requires a dependable, energy-efficient IoT node capable of adapting to diverse environments, this device offers a compelling blend of capability, reliability, and value.

• Versatile power options for field deployments — Use USB DC power, an onboard battery, or a solar power source to keep the node operating in remote or hard-to-reach locations.
• Ultra-low power radio technology — Exceptional efficiency with receive currents around 4.5 mA, transmit at 0 dBm around 5.4 mA, and transmit at 8 dBm around 9.7 mA, enabling extended lifetime between service visits.
• SMA connector and external antenna flexibility — The dedicated SMA interface allows you to pair the node with the antenna that best suits your coverage needs, for improved range and reliability.
• Low data-rate efficiency tailored for sensors — 0.25 Mbit/s data rate optimizes power use while delivering timely telemetry, alerts, and control messages for IoT applications.
• Industrial-grade reliability for remote operations — Engineered for long-term operation in challenging environments, with a design that supports scalable deployments across fleets and sites.

Technical Details of Advantech Wireless IoT Node

• Data Rate: 0.25 Mbit/s
• Power Sources: USB DC power, battery power, and solar power
• Interface: SMA connector for external antenna
• Current Consumption (typical): Receive — 4.5 mA; Transmit at 0 dBm — 5.4 mA; Transmit at 8 dBm — 9.7 mA

How to install Advantech Wireless IoT Node

Installing the Advantech Wireless IoT Node is designed to be straightforward, with a focus on quick setup and reliable field performance. Follow these steps to get your device up and running and ready to collect data from your sensor network:

• Unpack and inspect the IoT node and its SMA antenna connection to confirm there are no visible signs of damage. Ensure you have the appropriate external antenna compatible with the SMA connector.
• Attach the external antenna to the SMA connector securely, then position the antenna for optimal visibility and minimal obstructions to maximize signal quality.
• Choose your power source: connect a USB DC supply if the node will be used indoors or in a powered enclosure; connect a battery for off-grid operation; or connect a solar panel for autonomous outdoor deployments. Ensure the power source meets the device’s voltage and current requirements.
• Power on the node and access the configuration interface provided by the manufacturer’s tools. Configure core settings such as network gateway address, sensor data endpoints, reporting intervals, and any authentication or encryption parameters required by your network architecture.
• Mount the node in its planned installation area, securing cables and mounting hardware to withstand environmental conditions. Verify that the location provides adequate signal coverage and that ventilation is adequate to prevent heat buildup during operation.

Frequently asked questions

• What data rate does the Advantech Wireless IoT Node support? It supports a data rate of 0.25 Mbit/s, which is ideal for sensor telemetry and lightweight IoT messaging.
• What power options are supported? The node can be powered from USB DC power, an onboard battery, or a solar power source, allowing flexible deployment in both indoor and remote outdoor environments.
• Does the device include an antenna? Yes. The unit features an SMA connector for an external antenna, enabling you to select the best antenna for your coverage requirements.
• What are the typical current draws? Receive current is around 4.5 mA; transmit at 0 dBm is about 5.4 mA; transmit at 8 dBm is about 9.7 mA, making the node suitable for battery-powered configurations and extended operation.
• Is this node suitable for remote monitoring and industrial deployments? Yes. Its low power consumption, flexible power options, and robust antenna interface are designed for reliable remote sensing, asset tracking, and environmental monitoring in challenging environments.