Aerohive Compatible AH-ACC-SFP-10G-SR SFP+ Transceiver – 10GBASE-SR, 850nm, 300m, DOM, Duplex LC, TAA Compliant

Upgrade or expand your Aerohive network with a high-performance, cost-effective 10GBASE-SR SFP+ transceiver that delivers reliability, compatibility, and top-tier optics. The Aerohive Compatible AH-ACC-SFP-10G-SR is a functionally identical module designed to meet the demanding needs of data centers, enterprise campuses, and service providers. With an 850 nm VCSEL, DOM-enabled status monitoring, and a duplex LC interface for multimode fiber, this transceiver provides a seamless, plug-and-play solution that mirrors OEM performance at a fraction of the price. It’s TAA compliant, ensuring compliance with government procurement requirements, and it’s built to work alongside Aerohive devices and other systems that support SFP+ transceivers.

• Functionally identical to OEM 10GBASE-SR SFP+: This transceiver is designed to deliver the same performance, reliability, and compatibility as the original equipment manufacturer module. It’s engineered to work across Aerohive networks and compatible devices, providing a drop-in replacement that minimizes downtime and preserves network consistency. The 10GBASE-SR standard supports multi-mode fiber for short-range, high-bandwidth links, making it ideal for data centers, server rooms, and campus backbones.
• 850 nm, multimode fiber, up to 300 meters: The module uses an 850 nm VCSEL source optimized for short-range links on 50/125 μm multimode fiber. With support of up to 300 meters, you can confidently deploy in typical data-center geometries and campus networks without sacrificing performance. Its compatibility with OM2/OM3 fiber types helps you leverage existing cabling infrastructure, delivering fast, reliable 10 Gbps links where you need them most.
• Digital Optical Monitoring (DOM) for proactive management: DOM support provides real-time insights into laser status, temperature, and optical power levels. This capability enables proactive maintenance, quicker fault isolation, and improved network uptime. Administrators can monitor link health, track transceiver performance over time, and optimizeBrother channel utilization with confidence, knowing optical performance is observable at a glance through compatible management interfaces.
• Duplex LC connector and easy installation: The transceiver uses a standard duplex LC fiber connector, aligning with widely deployed multimode fiber infrastructure. It’s a plug-and-play SFP+ module that slides into any SFP+ port with a simple, secure click. No specialized tools are required, and it’s designed to fit standard SFP+ cages in Aerohive switches and compatible devices, making upgrades fast and straightforward.
• Cost-effective, compliant, and widely compatible: This Aerohive-compatible module offers a cost-effective alternative to OEM transceivers while maintaining rigorous quality and performance. It’s TAA compliant for government and enterprise procurement, and it’s tested to ensure compatibility with Aerohive AH-ACC series devices and other equipment that accepts 10GBASE-SR SFP+ optics. You get dependable performance, robust testing, and a warranty-backed solution that helps you optimize your network budget without compromising on quality.

Technical Details of Aerohive Compatible AH-ACC-SFP-10G-SR

• Product Type: SFP+ Transceiver
• Model / Part: AH-ACC-SFP-10G-SR
• Standard: 10GBASE-SR
• Wavelength: 850 nm
• Fiber Type: Multimode (50/125 μm)
• Distance (Max Reach): Up to 300 meters on MMF
• Connector: Duplex LC
• DOM (Digital Optical Monitoring): Yes
• Form Factor: SFP+
• Data Rate: 10 Gbps
• Compatibility: Aerohive compatible; functionally identical to OEM 10GBASE-SR SFP+
• Compliance: TAA Compliant
• Hot-Plug: Yes

How to Install Aerohive AH-ACC-SFP-10G-SR

• Power down the network device and, if applicable, disconnect power to the rack or chassis before installation to prevent any static or electrical issues.
• Locate an available SFP+ slot in your Aerohive switch or compatible device. Align the transceiver with the slot’s orientation and slide it straight in until you hear a soft click indicating a secure installation.
• Prepare your multimode fiber: ensure you have a clean duplex LC cable, trimmed to the appropriate length for your topology, and that the fiber ends are properly cleaved and inspected for quality.
• Connect the duplex LC end of your multimode fiber to the transceiver’s LC duplex connector and the other end to the corresponding transceiver or patch panel. Avoid bending the fiber beyond its minimum bend radius to prevent signal loss.
• Power on the device and verify link status via the device’s management interface. If available, check DOM readings to confirm healthy optical power and temperature values. Monitor the interface for stable 10G links and address any alerts promptly.

Frequently Asked Questions

• Q: Is the AH-ACC-SFP-10G-SR truly Aerohive compatible? A: Yes. This transceiver is designed for Aerohive networks and is functionally identical to OEM 10GBASE-SR SFP+ modules. It’s tested for compatibility with Aerohive AH-ACC-series devices and standard SFP+ ports, delivering reliable performance with minimal risk of compatibility issues.
• Q: What type of fiber and reach does this transceiver support? A: It uses 850 nm optics for short-range multimode fiber, with a typical reach of up to 300 meters on 50/125 μm multimode fiber. This makes it well-suited for data-center access, campus backbone connections, and short-range uplinks.
• Q: Does this module support Digital Optical Monitoring (DOM)? A: Yes. DOM provides real-time visibility into laser status, optical power, and temperature, enabling proactive maintenance and quicker fault diagnosis. Access to DOM data is available through compatible management interfaces on your device.
• Q: Is the transceiver compliant with trade regulations? A: The AH-ACC-SFP-10G-SR is TAA compliant, making it suitable for use in government, enterprise, and service-provider environments that require compliance with the Trade Agreements Act.
• Q: How do I ensure proper installation and long-term reliability? A: Use standard ESD precautions, handle the module by its edges, and avoid excessive force when seating it into the SFP+ slot. Verify a clean fiber end-face, avoid fiber tension, and use proper cable management to prevent strain. Regularly monitor link status and DOM metrics to maintain optimal performance.
• Q: Can I mix this module with OEM transceivers in the same network? A: For most configurations, mixing OEM and compatible transceivers that meet the same specifications is feasible. However, for critical deployments, conduct thorough testing in a controlled environment to confirm stable operation, and consult your network management documentation for any device-specific recommendations.