APC Back-UPS 650 – 8 Outlet (Canada)

Protect your critical devices with the APC Back-UPS 650, a compact and reliable uninterruptible power supply designed for Canadian homes and small offices. This 8-outlet unit delivers essential battery backup, robust surge protection, and intelligent voltage regulation to keep your computer, modem, router, and peripherals safe during power fluctuations and outages. With user-replaceable batteries, a compact tower design, and intuitive indicators, the APC Back-UPS 650 is a smart investment for data integrity, productivity, and peace of mind.

• 650 VA / 360 W power capacity provides dependable battery backup for a desktop computer, monitor, and essential peripherals during short outages, helping prevent data loss and unsaved work.
• 8 outlets total, with 4 battery-backed outlets and 4 surge-protected outlets, so you can protect a computer system while routing printers, speakers, and other accessories to the surge-only outlets.
• Automatic Voltage Regulation (AVR) stabilizes fluctuating voltages without discharging the battery, delivering clean and steady power even when the incoming supply is erratic.
• USB connection for safe system shutdown and PowerChute software compatibility, enabling graceful closes and automation that guards against data corruption when power is disrupted.
• Side-by-side design with easy battery replacement, loud but informative audible alarms, and clear LED indicators for quick status checks and effortless maintenance.

Technical Details of APC Back-UPS 650

• Power Rating: 650 VA / 360 W
• Output outlets: 8 total (4 with battery backup, 4 surge-protected)
• Topology: Line-Interactive with Automatic Voltage Regulation (AVR)
• Input voltage: 120 VAC nominal, 60 Hz
• Output voltage: 120 VAC ±5%
• Protection: Surge protection on all outlets; RJ-11/phone line protection on appropriate ports
• Battery: User-replaceable sealed lead-acid battery
• Interface: USB port for PC connection and PowerChute software compatibility; audible alerts and LED indicators
• Certification: UL-listed for safety and reliability in typical Canadian electrical environments
• Approximate runtime: Short to moderate runtime at half-load, sufficient to save work and perform a graceful shutdown during power interruptions

How to install APC Back-UPS 650

Installing the APC Back-UPS 650 is straightforward and designed for quick setup with minimal downtime. Start by choosing a stable, ventilated location near your computer desk or equipment rack. Place the UPS on a flat surface in an area where airflow is unobstructed and away from moisture or excessive heat. Ensure the unit is easily accessible for battery replacement and maintenance.

Step 1: Connect the UPS to a grounded wall outlet using the provided power cord. Avoid daisy-chaining through power strips to maximize protection and performance. Step 2: Attach your essential devices to the battery-backed outlets on the UPS. Reserve the surge-only outlets for peripherals that don’t require battery power, such as printers or speakers, to optimize the backup capacity for critical gear.

Step 3: For computers and network devices, connect the USB cable from the UPS to your PC or laptop. Install the PowerChute software on your computer to enable automatic shutdowns, event logging, and notifications in the event of a power outage. This ensures work is saved and applications are closed gracefully, protecting data integrity and reducing post-outage recovery time.

Step 4: If you plan to protect a modem or router, connect these devices to the surge-protected outlets to safeguard network connectivity in the event of a power spike. TheRJ-11/phone line protection helps shield dial-up or VoIP devices from common line surges, helping preserve communication during electrical disturbances.

Step 5: Periodically test the UPS to confirm it operates as expected. Use the test button or simulated outage feature if available in your PowerChute settings, and review the LED indicators to verify battery health and overall status. When the battery approaches end of life, replace it following the manufacturer’s guidelines to maintain reliable protection.

Maintenance is simple: keep the unit away from dust and moisture, perform periodic self-tests via PowerChute, and replace the battery every few years or as recommended by APC. The compact footprint and quiet operation make the Back-UPS 650 a practical upgrade for desks, home offices, and small business workstations in Canada, providing confidence that essential systems stay online and protected when the grid falters.

Frequently asked questions

• What does 650 VA mean for my setup? The 650 VA rating indicates the apparent power the UPS can supply briefly in the event of an outage. In practice, this translates to protecting a typical desktop system, monitor, and essential peripherals for a short period long enough to save work and shut down safely.
• Can I use the APC Back-UPS 650 with a Canadian electrical outlet? Yes. The unit is designed for 120 VAC / 60 Hz electrical environments common in Canada and should be plugged into a standard grounded outlet compatible with NEMA 5-15 plugs.
• Which devices should be connected to the battery-backed outlets? Attach your computer, monitor, and other critical components that must remain powered during an outage to the battery-backed outlets. Nonessential devices like printers and speakers can use surge-only outlets to maximize backup time for the essential gear.
• Do I need software to use this UPS? While the unit provides basic power protection out of the box, using the USB connection with PowerChute software enables automatic safe shutdown, event logging, and proactive notifications, which are especially helpful during longer outages or in business environments.
• Is the battery user-replaceable? Yes. The battery is designed to be user-replaceable, allowing you to extend the life of the unit without specialized service. Turn off and unplug the UPS before replacing the battery, and follow APC’s safety guidelines during the replacement procedure.