Apc By Schneider Electric Netshelter WX Wall-Mount Enclosure 13U Vented Door Black

The APC by Schneider Electric Netshelter WX wall-mount enclosure is engineered for space-efficient, secure housing of IT gear in tight environments. With a compact profile, a vented front door for improved airflow, and a sleek black finish, this enclosure blends rugged reliability with a modern aesthetic. It is designed to protect network equipment while keeping essential gear organized and accessible in walls, closets, or edge environments where floor space is at a premium. Ideal for small data rooms, remote offices, or busy retail back-office setups, the Netshelter WX provides a dependable home for switches, patch panels, small servers, and other 19-inch equipment without sacrificing airflow or serviceability.

• 13U capacity with standard 19" rack compatibility: This enclosure is purpose-built to securely hold up to 13U of IT equipment, making it an excellent choice for compact data closets and edge deployments. The wall-mount design optimizes available space while still delivering full 19" rack compatibility, so you can install switches, routers, patch panels, and compact servers with confidence. The result is a clean, organized rack layout that reduces clutter and improves airflow around critical devices.
• Vented door for optimized airflow and cooling: The vented front door is designed to promote passive cooling and reduce hot spots inside the enclosure. This is especially important in tight spaces where equipment can run warmer than in larger cabinets. A well-vented enclosure helps maintain performance and longevity for network gear, while avoiding costly cooling solutions in small offices or closets.
• Rugged, black powder-coated finish: The enclosure uses heavy-gauge steel with a durable black powder coating that resists scratches, scuffs, and corrosion in everyday environments. The matte black look provides a professional, low-profile aesthetic suitable for IT rooms, retail backrooms, or modern office settings. The robust finish helps protect the enclosure from daily use, while still maintaining a sleek appearance.
• Flexible interior with adjustable rails and cable management: Inside, adjustable mounting rails support a variety of 19" devices, enabling a customizable layout that fits your current and future needs. Integrated cable management features help you route power and data cables cleanly, minimize clutter, and improve serviceability. This flexibility makes it easy to reorganize equipment as your network evolves without replacing the enclosure.
• Simple, tool-friendly installation with secure access: The wall-mount design simplifies installation in spaces where free-floor area is limited. The enclosure is designed for straightforward mounting to solid walls or studs and includes the necessary hardware for secure installation. Front-access design enables convenient maintenance, while a lockable door provides added security for sensitive devices in shared spaces.

Technical Details of Apc By Schneider Electric Netshelter WX Wall-Mount Enclosure 13U Vented Door Black

• Technical specifications are provided by the vendor and may vary by UPC/SKU. Please consult the official product page for the most current details.

How to install Apc By Schneider Electric Netshelter WX Wall-Mount Enclosure

Installing the Netshelter WX wall-mount enclosure is a straightforward process designed to maximize safety and accessibility. Begin by selecting a sturdy wall location that can support the weight of your equipment and provides convenient access for maintenance. If possible, locate the enclosure near power outlets and data drops to minimize cable lengths and clutter. Use a stud finder to identify wall studs and plan mounting points accordingly. If studs are not readily available, use appropriate wall anchors rated for the enclosure’s weight and the load of installed gear.

Step 1: Prepare mounting rails and enclosure. Confirm that the 19" mounting rails are correctly oriented for your equipment height and depth. Remove any rear panels or covers if you need access to interior mounting points or rear cable routing. Step 2: Attach rails to the enclosure. Align the rails with the rail mounting points inside the enclosure and secure them with the provided screws. Ensure rails are level and securely tightened to support the weight of mounted devices. Step 3: Mark the wall location. Hold the enclosure against the wall at the chosen height and use a pencil to mark the drill points through the mounting holes. Step 4: Mount to wall. Drill pilot holes and insert appropriate wall anchors or position the enclosure over studs, then fasten securely using the supplied mounting hardware. Step 5: Route cables and power. Plan cable paths to minimize congestion—use rear openings, knockouts, or grommets as needed. Route power and data cables neatly, leaving extra slack for maintenance. Step 6: Install equipment. Begin with heavier devices first, such as switches or small servers. Secure devices to the rail pairs and ensure proper alignment with 19" standards. Step 7: Manage cables and close the door. Use cable ties or Velcro straps to tidy cables and prevent interference with doors or fans. Close and lock the door to preserve security. Step 8: Verify airflow and accessibility. Confirm that the vented door remains unobstructed and that front and rear access is unobstructed for maintenance. Regularly inspect seals, locks, and mounting hardware to maintain reliability over time.

Safety tip: Always consult the manufacturer’s installation manual for weight ratings, recommended mounting hardware, and any site-specific requirements. Maintain clearances around the enclosure to promote airflow and make future upgrades easier. With the Netshelter WX, you gain a compact, scalable solution that adapts to evolving IT needs without occupying valuable floor space.

Frequently asked questions

• Q: What is the capacity of this enclosure?

  A: It is designed to hold up to 13U of 19" IT equipment, providing a compact but practical solution for small data closets and edge deployments.

• Q: Is the door vented?

  A: Yes, the enclosure features a vented door to support airflow and cooling for mounted devices.

• Q: What is the finish and material?

  A: The enclosure is constructed from steel with a durable black powder-coated finish for long-term resilience in busy environments.

• Q: Is it compatible with standard 19" equipment?

  A: Yes, the Netshelter WX wall-mount enclosure is designed to accommodate standard 19" equipment and integrated mounting rails.

• Q: How do I install this enclosure?

  A: Installation involves selecting a suitable wall, mounting the rails inside the enclosure, attaching the enclosure to the wall, routing cables through knockouts and grommets, mounting equipment, organizing cables, and closing the door. Always follow the official installation guide for weight ratings and safety recommendations.

• Q: Can I use this enclosure in a small office or retail back room?

  A: Yes. Its wall-mount design, compact footprint, and secure, orderly setup make it ideal for small offices, retail back rooms, and edge locations where space is at a premium.