APC Replacement Battery Cartridge #88 with 2 Year Warranty

Restore your APC UPS to peak performance with the Genuine APC Replacement Battery Cartridge #88 (RBC-88). This 6V, 5.6Ah sealed lead-acid battery is designed to perfectly match APC’s original specifications, delivering reliable power during outages and protecting critical equipment. Whether you’re safeguarding a home office, small business, or data center edge device, this RBC-88 replacement battery provides the peace of mind that comes from using an authentic APC component. Each unit is engineered for compatibility, reliability, and long service life, so you can trust your UPS to perform when it matters most.

Choosing the APC RBC-88 means choosing a battery that has been tested and certified to restore your UPS to its original performance. The lead-acid chemistry is time-tested for stability and predictable discharge, while the compact 6-volt format makes installation straightforward across a range of APC UPS models that rely on RBC-88 replacements. With a two-year warranty, you gain ongoing protection against defects and vendor-backed support, ensuring your backup power infrastructure stays operational through routine maintenance and unexpected events alike. The battery ships brand-new from a strictly managed warehouse, with careful handling and packaging designed to safeguard quality during transit and storage, so you receive a fresh, ready-to-install component every time.

From home offices to mission-critical setups, the APC RBC-88 replacement battery is built to minimize downtime. It is a true plug-and-play upgrade for APC UPS systems that require an RBC-88 cartridge, so you can refresh your power reserve without complex modifications or specialized tools. The combination of authentic APC engineering, certified safety standards, and dependable capacity helps ensure that your critical devices stay online when the power grid falters. If you manage small business operations or safeguard important data in a remote location, the RBC-88 provides a trusted battery replacement that complements your existing UPS investment and lengthens the interval between full UPS replacements.

With this replacement battery, you’re not just buying a component—you’re investing in continued uptime efficiency. The 6V, 5.6Ah capacity is engineered to deliver the right balance between runtime and recharge efficiency, enabling your APC UPS to support connected devices during fluctuations and outages. The product’s safety certifications and compliance with UPS standards reinforce a commitment to responsible operation and safe handling, keeping both personnel and equipment protected. In short, the APC Replacement Battery Cartridge #88 is a practical, cost-effective way to extend the life of your UPS, maintain data integrity, and safeguard essential workloads against power interruptions.

• Compatibility with APC UPS models that use RBC-88 cartridges; engineered to restore original UPS performance after battery wear.
• 6V 5.6Ah sealed lead-acid (SLA) battery delivers reliable runtime and predictable discharge characteristics for critical loads.
• Genuine APC RBC-88 replacement ensures tested compatibility, safety certifications, and long-term reliability.
• Two-year warranty provides peace of mind and protection against defects, with APC-backed support for your investment.
• Brand-new, professionally sourced battery shipped from a strictly managed warehouse, with safe packaging and UPS safety certifications to meet standards.

Technical Details of APC Replacement Battery Cartridge #88

• Battery Type: Sealed Lead-Acid (SLA)
• Voltage: 6V
• Capacity: 5.6Ah
• Chemistry: Lead-Acid, maintenance-free design
• Replacement for: APC RBC-88 cartridge (RBC for compatible APC UPS models)
• Warranty: 2-year limited warranty
• Safety Certifications: UPS safety certifications and general safety compliance
• Packaging: Brand-new battery, shipped from a managed warehouse

How to install APC Replacement Battery Cartridge #88

• Power down the APC UPS and disconnect it from any connected devices or power sources.
• Unplug the UPS from the wall outlet and allow the unit to cool if it was recently in use.
• Open the battery compartment following the manufacturer’s instructions for your specific UPS model.
• Carefully remove the old RBC-88 cartridge, noting terminal orientation and securing hardware.
• Inspect terminals and connectors for corrosion or damage; clean if necessary and ensure the bay is free of debris.
• Install the new RBC-88 replacement, aligning terminals with the correct orientation and securing it firmly into the compartment.
• Reconnect any cables or leads as they were configured, ensuring solid contact and proper routing away from heat sources.
• Close the battery compartment, secure all latches, and reattach the UPS cover if applicable.
• Place the UPS back on its mount or surface, plug it into a power source, and allow it to initialize.
• Run a self-test if your UPS supports it to verify battery status and overall health, confirming restored runtime.
• Dispose of the old battery in accordance with local regulations or recycling programs for lead-acid batteries.

Frequently asked questions

• Q: Is the APC Replacement Battery Cartridge #88 compatible with all APC UPS models?
• A: This cartridge is designed to replace RBC-88 in APC UPS models that specify RBC-88 compatibility. Always verify your UPS model and battery designation to ensure compatibility before purchase. If your unit lists RBC-88 as the replacement option, this battery is appropriate.
• Q: What does the 2-year warranty cover?
• A: The 2-year warranty covers manufacturing defects and battery performance issues under normal use. It does not cover damage from improper installation, misuse, or external factors beyond the battery’s control. Keep your proof of purchase for warranty service.
• Q: How long will the 6V 5.6Ah RBC-88 battery run my devices?
• A: Runtime varies with load and UPS model. The 5.6Ah capacity provides a dependable reserve for critical devices during outages, allowing time to save work and safely power down. For exact runtime, refer to your UPS’ technical specifications or perform a self-test after installation.
• Q: Is installation difficult for a non-technical user?
• A: Replacing an APC RBC-88 is a straightforward process for most users who follow the UPS manufacturer’s installation steps. The included steps cover removal of the old cartridge and insertion of the new one. Always ensure the UPS is powered off and unplugged during replacement.
• Q: Are there safety or disposal considerations for this battery?
• A: Lead-acid batteries require proper handling and recycling. Do not incinerate or expose the battery to high heat. Dispose of the old battery at an approved recycling facility according to local regulations. Store the new battery in a cool, dry place before installation if not used immediately.