Arcserve 64GB (4 x 16GB) DDR4 SDRAM Memory Kit

Upgrade your critical workloads with the Arcserve 64GB (4 x 16GB) DDR4 SDRAM Memory Kit. This high-density memory upgrade is engineered to deliver a substantial performance uplift for database appliances, virtualization hosts, and other demanding applications. With 64GB of total capacity spread across four 16GB DDR4 DIMMs, you gain the headroom necessary to handle large datasets, accelerate complex queries, and improve overall system responsiveness. DDR4 technology brings higher bandwidth and lower power consumption compared to older generations, helping your server run cooler and more efficiently even under heavy load. Whether you’re optimizing OLAP queries, accelerating big data analytics, or maintaining seamless operations in a virtualized environment, this memory kit provides the reliable, scalable foundation your workloads require.

• High-capacity, high-density upgrade: This kit delivers 64GB of total memory (4 x 16GB DDR4 DIMMs), enabling large in-memory datasets, extensive virtualization, and smoother multitasking across multiple applications without stressing your server’s memory pool.
• Designed for demanding workloads: Aimed at database appliances, analytics, virtualization hosts, and other memory-intensive environments, the Arcserve memory kit helps reduce paging, lowers latency, and speeds up data processing pipelines for faster results.
• DDR4 performance with improved efficiency: DDR4 SDRAM provides higher bandwidth, improved data throughput, and reduced power usage compared with previous generations, supporting sustained performance while keeping thermal output in check in dense data-center deployments.
• Plug-and-play compatibility: The four 16GB DIMMs are configured to fit standard DDR4 memory slots found in most modern servers and appliances. With proper system compatibility, installation is straightforward with no complex tuning required.
• Reliability and compatibility assurance: Arcserve tests and certifies memory solutions across a wide range of platforms to ensure stable operation in 24/7 environments, giving you confidence in uptime and data integrity during peak workloads.

Technical Details of Arcserve 64GB (4 x 16GB) DDR4 SDRAM Memory Kit

• Capacity: 64GB total (4 x 16GB)
• Memory Type: DDR4 SDRAM
• Configuration: 4 x 16GB DIMMs
• Form Factor: DIMM (standard server memory)
• Compatibility and notes: Designed for use in supported server platforms and database appliances; exact speed, timings, and voltage depend on the specific SKU and system. Verify compatibility with your motherboard or server vendor's memory support matrix for best results.

How to install Arcserve 64GB (4 x 16GB) DDR4 SDRAM Memory Kit

Installing the Arcserve memory kit is a straightforward process that follows standard precautions for handling computer hardware. Before you begin, power down the system, unplug all cables, and discharge any static electricity by touching a grounded metal object. Use an anti-static wrist strap if available and work on a non-conductive surface to protect the components.

• Prepare the server: Open the chassis or access panel according to the manufacturer’s instructions. Identify the memory expansion slots and review the motherboard’s memory population guidelines, including preferred channel order for multi-channel configurations.
• Power and ground: Ensure the power is fully disconnected and that you’re grounded to prevent ESD damage to the DIMMs and motherboard.
• Install in the correct slots: Align each 16GB DDR4 DIMM with its slot, keeping the notch orientation consistent. Insert firmly until the retention latches click into place, securing each module. If your system uses interleaved memory channels for performance, install modules in the recommended channel order (often opposed slots first).
• Check seating and BIOS: After all four DIMMs are seated, re-check each module to confirm it’s fully engaged. Reassemble the chassis, reconnect power, and boot. Enter the BIOS/UEFI if needed to confirm the memory is detected and the total capacity matches 64GB.
• Run validation: Save any BIOS changes and operate the system normally. Run memory diagnostics or a representative workload test to verify stability and performance under typical operating conditions.

Frequently Asked Questions

• What capacity does this kit provide? The Arcserve memory kit provides 64GB of total memory, configured as four 16GB DDR4 DIMMs (4 x 16GB).
• What workloads is this memory kit best suited for? It is optimized for database appliances, virtualization hosts, analytics pipelines, and other memory-intensive applications that benefit from larger memory pools and higher bandwidth.
• Is this memory ECC or non-ECC? The memory kit includes DDR4 DIMMs that can be ECC or non-ECC depending on the exact SKU and server platform. Check your motherboard or server documentation to confirm ECC support and enablement in BIOS/UEFI if required.
• Will this kit work with my server? The kit is designed for use in supported server platforms with DDR4 memory slots. Always verify compatibility with your server’s Qualified Memory Vendor (QMV) list or memory compatibility matrix from the vendor to ensure proper operation and optimum performance.
• Do I need to adjust BIOS settings after install? In most cases, no special BIOS tuning is required. Some systems may benefit from enabling XMP/DOCP profiles if available to optimize memory speed. Refer to your system manual for guidance on enabling memory profile settings.
• Can I mix these modules with existing memory? Mixing memory modules can lead to unpredictable performance or compatibility issues. It is generally recommended to install a matching set (same capacity, speed, and rank) to maintain optimal performance and stability.
• What about warranty and support? Arcserve memory kits typically come with a manufacturer warranty and access to support resources. For specific warranty terms, refer to the product documentation or contact Arcserve support.