Black Box Mini CATx VGA Extender Kit

The Black Box Mini CATx VGA Extender Kit is the perfect solution for anyone looking to extend VGA video signals over long distances without sacrificing quality. This compact, standalone kit connects your video monitor or display up to 500 feet (150 m) away from your source device using ordinary CAT5/5e/6 UTP cables. Forget about the costs associated with expensive VGA cables; this extender kit provides a budget-friendly and effective way to achieve high-resolution video transmission.

• Superior Video Quality: The kit supports VGA resolutions up to 1920 x 1200, including stunning 1080p quality video, ensuring your visuals are always crisp and clear.
• Easy Setup: With the included transmitter and receiver, installation is straightforward. Simply connect the transmitter to your PC or video source and the receiver to your monitor or projector, and you’re ready to go.
• Compact Design: The mini form factor of both units allows for discreet installation in spaces where traditional extenders would be cumbersome, making it perfect for public areas or home theaters.
• No Degradation: Experience little to no degradation in video quality, even at maximum distances, thanks to advanced video equalization and gain control features that optimize the image for remote displays.
• Power Flexibility: The system requires power only at one end, allowing for easy use in locations with limited power outlets. You can plug the power supply into either the transmitter or receiver, depending on your setup needs.

Technical Details of the Product

• Maximum Distance: 500 feet (150 m)
• Supported Resolutions: Up to 1920 x 1200, including 1080p
• Power Supply: Single unit required, compatible with both transmitter and receiver
• Cable Type: CAT5/5e/6 UTP cable
• Equalization: Yes, with gain control for video optimization
• EDID Copy Feature: Allows for automatic adaptation to monitor's capabilities

How to Install

Installing the Black Box Mini CATx VGA Extender Kit is simple and quick:

1. Connect the VGA output from your PC or video source to the input of the transmitter using a standard VGA cable.
2. Use a CAT5/5e/6 cable to link the transmitter to the receiver, ensuring the cable is long enough to reach your desired distance.
3. Connect the VGA output from the receiver to your monitor, projector, or display device.
4. Finally, plug in the power supply to either the transmitter or receiver, depending on your setup preference.

Frequently Asked Questions

• What types of cables can I use with this extender kit? You can use ordinary CAT5, CAT5e, or CAT6 UTP cables to extend the VGA signal without any loss in quality.
• Does the kit support audio transmission? No, the Black Box Mini CATx VGA Extender Kit is designed specifically for video (VGA) transmission. Audio will need to be transmitted separately.
• Can I use this kit for multiple monitors? This kit is designed for point-to-point connections between a single PC and a single monitor. For multiple displays, additional extenders would be required.
• Is there any special software needed to run this extender kit? No software is required. The kit operates with plug-and-play technology, making it easy to set up and use immediately.
• What should I do if I experience video quality issues? Make sure that the cable connections are secure and that you are using a high-quality CAT5/5e/6 cable. You can also adjust the equalization and gain controls on the transmitter for better image quality.