Black Box NEMA-Rated Fiber Splice Tray Wallmount Enclosure

The Black Box NEMA-Rated Fiber Splice Tray Wallmount Enclosure is engineered to protect critical fiber optic cabling in damp environments, delivering reliable performance where moisture, dust, or everyday wash-downs threaten signal integrity. This enclosure is built to last, with a lifetime guarantee that underlines Black Box’s commitment to durability and long-term value for your network infrastructure. Its compact wall-mount design conceals and organizes delicate splice points, while providing quick, secure access for technicians. Inside, an adjustable bracket accommodates up to two fiber splice trays and ships with one tray, enabling immediate, organized fiber management. Cable ingress and egress are handled through two watertight openings, preserving splice protection from the elements and ensuring clean, professional cable routing. A single rubber-gasket door pairs with a hex-nut security lock to deter tampering while still allowing straightforward maintenance. In short, this enclosure combines rugged protection with practical fiber management in a versatile, space-efficient package suitable for data centers, industrial facilities, outdoor installations, and remote telecom sites.

• Rugged NEMA-rated protection for damp environments — Designed to shield delicate fiber connections from humidity, rain, dust, and wash-down conditions. The enclosure employs sealed seams and corrosion-resistant components to maintain insulation integrity and protect splices, connectors, and trays, ensuring consistent performance in tough environments such as equipment rooms near docks, outdoor walls, or service yards. The reliability of NEMA-rated construction translates into fewer maintenance calls and longer intervals between splices, which is especially valuable for deployed networks where access is limited and downtime is costly.
• Internal splice-tray compatibility — An intelligently engineered internal bracket supports up to two fiber splice trays, providing a tidy, scalable fiber-management solution. The enclosure ships with one splice tray and is designed to accommodate additional trays as your network grows, enabling operators to add or reorganize splices without replacing the enclosure. This modular approach helps reduce clutter, improve cable tracking, and simplify future migrations or expansions, while maintaining orderly routing and bend-radius control to protect fiber integrity.
• Watertight cable entries — Two watertight openings allow cables to enter or exit the enclosure while preserving environmental protection. This design minimizes moisture ingress, controls condensation, and helps maintain stable thermal and humidity conditions inside the cabinet. The watertight entries support diverse cable types and terminations, enabling secure transitions from outdoor to indoor environments, or from wet plant areas to climate-controlled rooms, without compromising performance or IP-style protection.
• Security and accessibility — A single rubber-gasket door combines with a hex-nut security lock to provide convenient but tamper-resistant access for maintenance crews. This balance of accessibility and security is ideal for shared facilities or remote locations where unauthorized access could threaten network integrity. The gasketed door maintains a tight seal against dust and moisture while offering technicians straightforward entry to manage splices, inspect tray contents, or perform routine diagnostics without tools-heavy disassembly.
• Lifetime durability and easy mounting — Built to endure challenging environments, this enclosure carries a lifetime guarantee that underscores the long-term value of the investment. The wall-mount design simplifies installation in narrow spaces or constrained equipment rooms, and the enclosure’s mounting footprint supports secure, low-profile placement. With robust construction and simple mounting hardware, technicians can deploy the system quickly and confidently, minimize downtime, and focus on delivering reliable fiber connectivity to end users.

Technical Details of Black Box NEMA-Rated Fiber Splice Tray Wallmount Enclosure

• Get this information from the "specifications" section of the product from https://ec.synnex.com/ using product "UPC" or "SKU" as reference

How to Install Black Box NEMA-Rated Fiber Splice Tray Wallmount Enclosure

Installing the NEMA-rated fiber splice tray wallmount enclosure is a straightforward process designed to maximize protection and ease of maintenance. Begin by selecting a location that is dry, structurally sound, and capable of supporting the enclosure's weight when fully loaded with splice trays and cabling. Ensure there is adequate clearance for door operation and for cable management, as well as proximity to necessary power or equipment terminals if required by your network design. Consider the expected environmental conditions, such as exposure to direct weather, heat sources, or industrial contaminants, and mount the unit to minimize vibration and thermal cycling that could affect connections over time.

• Plan your cable routing in advance. Identify entry and exit points and ensure that the available two watertight openings can accommodate the anticipated number and sizes of fiber cables, along with any required strain relief components. Route cables away from sharp edges, abrasive surfaces, and areas where sunlight or heat could degrade insulation. Maintain appropriate bend radii to protect fiber integrity and to minimize insertion loss.
• Mount the enclosure securely to a solid surface using corrosion-resistant hardware. Align screws with mounting holes and tighten to the manufacturer's recommended torque to avoid warping the enclosure. Verify that the door closes smoothly without binding and that the gasket seals evenly around the perimeter to ensure water and dust resistance remains intact after installation.
• Prepare the internal fiber management layout. Install or position the internal bracket for up to two splice trays. Place the included splice tray and plan the splice points, fiber routing paths, and protection against movement during operation. Keep splice sleeves, adapters, and connectors organized and clearly labeled to speed future maintenance and reduce the risk of mistakes during re-termination.
• Install and route fibers through the watertight openings, using proper strain relief and locking mechanisms to prevent movement. Maintain proper bend radii to avoid micro-bends that can degrade signal quality. If required, use thermal or environmental considerations to optimize cooling and moisture protection. Confirm that all cables are secured and that there is no tension at the splice points.
• Close the door, engage the hex-nut security lock, and perform a thorough seal check. Confirm that the gasket seats evenly and that the door operates without binding. Test for environmental integrity by simulating moisture exposure or performing a light spray test if your facility’s procedures require it. Finally, conduct a functional fiber test to verify continuity, attenuation, and insertion loss across all active splices and paths.

The above steps provide a practical framework for installing the enclosure in a range of settings, from data-center corridors and telecom rooms to outdoor wall installations near service entrances. For optimal results, adhere to your organization’s safety protocols, local electrical codes, and industry best practices concerning fiber management, static protection, and environmental sealing. Proper installation not only preserves the integrity of splice points but also extends the life of the enclosure and saves time during routine maintenance and future network upgrades.

Frequently Asked Questions

• Q: Is this enclosure suitable for outdoor installation?
• A: Yes. It is designed for damp environments and features watertight cable entries and a gasketed door to protect fiber splices in challenging conditions.
• Q: How many splice trays can this enclosure hold?
• A: The internal bracket supports up to two fiber splice trays, and the package includes one splice tray for immediate use. Additional trays can be added as needed for larger networks.
• Q: Does it come with a security lock?
• A: The enclosure includes a hex-nut security lock to deter tampering while still allowing straightforward technician access for routine maintenance.
• Q: What maintenance is recommended?
• A: Regularly inspect seals and door alignment, verify that cable entries remain watertight, monitor the integrity of splice trays and sleeves, and document any changes to splice configurations for future reference.
• Q: Can I upgrade or replace the splice trays later?
• A: Yes. The internal bracket is designed for add-on capacity, allowing you to expand splicing capacity by adding additional splice trays as network demands grow, without replacing the enclosure.
• Q: What is the warranty on this enclosure?
• A: It comes with a lifetime guarantee from Black Box, reflecting the company’s commitment to durability and long-term support for critical fiber infrastructure.