Bosch VG4-A-9541 Mounting Adapter for Camera, Mounting Arm — White

The Bosch VG4-A-9541 Mounting Adapter is a robust pole-mount solution engineered for reliable, high-performance surveillance deployments. Specifically designed to accommodate AUTODOME pendant arms or DINION imagers, this white mounting adapter enables secure, versatile installations on poles with a diameter range of 100 to 380 mm (4 to 15 inches). Built to withstand demanding environments, the VG4-A-9541 delivers dependable mounting that supports consistent imaging angles, quick installation, and long-term durability. Its thoughtful design minimizes maintenance needs while maximizing productivity, making it an ideal choice for professional security systems that require flexibility without compromising reliability. Whether you are upgrading an existing camera fleet or deploying new infrastructure, this adapter provides a clean, streamlined mounting interface that blends with a variety of architectural and urban settings.

• Wide compatibility for flexible deployments: Designed to support Bosch AUTODOME pendant arms or DINION imagers, ensuring you can reuse existing camera hardware or standardize across multiple models for easier maintenance and upgrades. The adapter provides a stable, secure interface that preserves camera alignment and image quality over time.
• Pole-diameter versatility: Engineered for poles with diameters ranging from 100 to 380 mm (4–15 inches), enabling installation on a broad spectrum of pole types without the need for adapter changes or additional fittings. This flexibility helps simplify site planning and reduces component inventory.
• Strong load-bearing performance: Supports up to 25 lb (11.3 kg), allowing you to mount mid- to heavier-duty cameras and imaging devices with confidence. This capacity ensures steadiness under wind load, vibration, and environmental exposure, preserving image stability.
• Rugged, impact-resistant construction: Built to withstand the rigors of outdoor environments and active installations. The impact-resistant design minimizes maintenance interruptions and helps protect critical surveillance investment from everyday wear and accidental impact.
• Productivity-driven design: The VG4-A-9541 is optimized for fast, reliable mounting with precise alignment, reducing installation time and enabling security teams to deploy or reconfigure camera networks quickly while maintaining professional aesthetics.

Technical Details of Bosch VG4-A-9541 Mounting Adapter for Camera, Mounting Arm

• Mounting compatibility: Pole-mount adapter designed for AUTODOME pendant arms or a DINION imager.
• Pole diameter range: Suitable for poles with a diameter of 100–380 mm (4–15 inches).
• Finish: White powder-coated housing for a clean, professional appearance that blends with various environments.
• Load capacity: Maximum load of 25 lb (11.3 kg) to accommodate a range of cameras and accessories.
• Durability: Impact-resistant design intended to endure outdoor conditions and provide long-term reliability.

How to Install Bosch VG4-A-9541 Mounting Adapter for Camera, Mounting Arm

Installing the VG4-A-9541 is straightforward. Follow these general steps to ensure a secure, properly aligned mounting solution for AUTODOME pendant arms or DINION imagers. Always observe the specific equipment manuals for safety and compatibility details, and use appropriate tools and safety gear for elevated installations.

• Step 1: Verify pole compatibility. Confirm that the mounting pole diameter falls within the 100–380 mm (4–15 in.) range and inspect the pole for structural integrity and any signs of corrosion or damage before installation.
• Step 2: Prepare the mounting interface. Align the VG4-A-9541 with the camera’s mounting interface (AUTODOME pendant arm or DINION imager) so that final orientation will meet your surveillance coverage requirements.
• Step 3: Attach the adapter to the pole. Use the included mounting hardware and tighten evenly to avoid misalignment. Ensure that the adapter is level and firmly secured to withstand environmental loads and camera motion.
• Step 4: Mount the camera assembly. Attach the AUTODOME pendant arm or DINION imager to the adapter, verify horizontal and vertical alignment, and tighten all fasteners to the recommended torque values to prevent drift over time.
• Step 5: Route cabling and finalize the installation. Neatly route power and data cables, apply weatherproofing as required by the site, and perform a functional check of the camera. Confirm that the camera focuses correctly, that image quality is optimal, and that the mounting assembly remains stable after a typical wind and vibration test.

Frequently Asked Questions

• Q: What cameras are compatible with the VG4-A-9541 mounting adapter?
  A: It is designed to work with Bosch AUTODOME pendant arms or DINION imagers, providing a unified mounting solution across compatible Bosch camera platforms.
• Q: What is the range of pole sizes the adapter fits?
  A: The adapter is suitable for poles with diameters from 100 to 380 mm (4 to 15 inches), offering broad installation versatility for different site geometries.
• Q: How much weight can the adapter support?
  A: The VG4-A-9541 supports up to 25 lb (11.3 kg), enabling stable mounting for mid-to-heavier camera configurations.
• Q: What is the color or finish of the adapter?
  A: The adapter features a white finish, providing a clean, unobtrusive appearance on most poles and environments.
• Q: Is the adapter durable for outdoor use?
  A: Yes. The VG4-A-9541 is designed with an impact-resistant construction to withstand typical outdoor conditions and reduce maintenance needs over time.