Brocade (Formerly) 10G-SFPP-ER-1610 Compatible SFP+ Transceiver (SMF, 1610nm, 40km, LC, DOM)

Designed for high-performance data networks, this Brocade (Formerly) 10G-SFPP-ER-1610 compatible SFP+ transceiver delivers dependable 10GBase-CWDM throughput over single-mode fiber, spanning up to 40 kilometers. With a wavelength of 1610 nm and an LC duplex connector, it is built for long-reach CWDM links in enterprise, data center, and service-provider environments. The module carries TAA compliance for government and regulated procurement, ensuring compatibility with a wide range of purchasing frameworks. Whether you are upgrading an existing 10G backbone or expanding a CWDM deployment, this transceiver provides plug-and-play compatibility with Brocade SFP+ ER transceivers while maintaining the performance and reliability you expect from a proven 10G solution.

• 10GBase-CWDM throughput over single-mode fiber (SMF) at 1610 nm, enabling long-reach links up to 40 km in standard environments.
• Hot-pluggable SFP+ form factor for easy installation into a wide range of switches, routers, and media converters that support SFP+ transceivers.
• LC duplex fiber connector for straightforward integration with standard CWDM/SFP+ networks and fiber infrastructure.
• Digital Optical Monitoring (DOM) support provides real-time visibility into laser temperature, source current, voltages, and optical power for proactive link health management.
• TAA compliant and designed to align with procurement requirements while offering compatibility with Brocade (Formerly) 10G-SFPP-ER-1610 ecosystems and similar CWDM ER deployments.

Technical Details of Brocade (Formerly) 10G-SFPP-ER-1610 Compatible SFP+ Transceiver

• Form Factor: SFP+ transceiver interface
• Data Rate: 10 Gbps for 10GBASE-CWDM ER applications
• Wavelength: 1610 nm CWDM channel
• Fiber Type: Single-Mode Fiber (SMF)
• Reach: Up to 40 kilometers under standard CWDM link budgets
• Connector: LC duplex
• Digital Optical Monitoring (DOM): Yes, for ongoing device health and performance insight
• Compliance: TAA compliant
• Compatibility: Designed to fit Brocade (Formerly) 10G-SFPP-ER-1610 environments and other devices requiring an ER-class CWDM SFP+ module

How to install Brocade (Formerly) 10G-SFPP-ER-1610 Compatible SFP+ Transceiver

Installing this transceiver is a straightforward, non-disruptive process when performed with standard best practices for SFP+ modules. Follow these steps to ensure a reliable CWDM link and long-term performance:

• Power down the network device or ensure it is in a maintenance window if required by your IT policy before handling any module.
• Open the device’s SFP+ slot and align the module with the slot’s keying. Insert the transceiver firmly until it seats and an audible click confirms it is locked in place.
• Connect a single-mode fiber patch cord with LC connectors to the module’s LC duplex interface. Ensure the transmit (Tx) and receive (Rx) ends are correctly paired with the opposite device to establish a CWDM link.
• Power up the device and verify initial link status via the management interface or CLI. Look for a green link light and confirm the transceiver is recognized in the device’s inventory.
• Use DOM readings or device diagnostics to monitor laser temperature, bias current, and optical power. Check for any alarms or warnings and address fiber cleanliness or connector contamination if necessary.
• Validate the link budget by running throughput tests or a basic connectivity check over the CWDM channel. Confirm that the 40 km reach is achievable within your network’s path loss assumptions.
• Document the installation details, including serial numbers, MAC addresses (if applicable), firmware/driver version of the host device, and the tested link characteristics for future maintenance and audits.

Frequently asked questions

• Q: What is the maximum reach of this transceiver?
  A: Up to 40 kilometers on single-mode fiber (SMF) using the 1610 nm CWDM channel, as tested in standard environments.
• Q: Which connector type does this module use?
  A: The transceiver uses an LC duplex fiber connector for compatibility with standard SMF CWDM deployments.
• Q: Is this module compatible with non-Brocade devices?
  A: It is designed to be compatible with networks that support 10GBASE-CWDM ER implementations and the Brocade (Formerly) 10G-SFPP-ER-1610 format. Always verify cross-compatibility with your device vendor.
• Q: Does it include Digital Optical Monitoring (DOM)?
  A: Yes, the module supports DOM, allowing you to monitor optical power, temperature, and other critical parameters in real time.
• Q: Is this transceiver eligible for procurement under trade agreements?
  A: Yes, the module is TAA compliant, making it suitable for procurement under applicable trade agreements in the United States and other compliant regions.