Brocade Compatible 10G-SFP+ DWDM Transceiver (1541.35nm, 80km, LC, DOM) – TAA Compliant

Meet a high-performance, cost-efficient upgrade for enterprise and data-center networks: the Brocade (Formerly) 10G-SFPP-ZRD-1541-35 compatible SFP+ transceiver. Engineered for 10GBase-DWDM throughput over single-mode fiber, this module delivers reliable, long-haul connectivity with precise 100 GHz spacing at a wavelength of 1541.35 nm. Designed to harmonize with a wide range of 10G SFP+ ports, it’s an ideal choice for replacing aging OEM modules or expanding a DWDM fiber backbone without compromising performance or interoperability. The module is DOM-enabled for real-time optical monitoring and is built to perform in demanding data-center environments, making it a versatile, plug-and-play solution for upgrades, migration projects, and new deployments.

• 10GBase-DWDM capability over single-mode fiber with a robust reach up to 80 kilometers, enabling scalable, long-haul data transport between data centers, core switches, and distribution layers.
• Wavelength specification of 1541.35 nm with 100 GHz DWDM channel spacing and an LC duplex optical connector, delivering precise channel alignment for dense ROADM-enabled networks.
• DOM (Digital Optical Monitoring) support for proactive network management, offering real-time insights into optical power, temperature, and signal integrity to shorten fault diagnosis times and improve uptime.
• Operational temperature range from 0 to 70 degrees Celsius, ensuring reliable performance in standard data-center racks, telecom rooms, and edge deployments with varying ambient conditions.
• TAA compliant and designed as a compatible alternative to OEM 10G SFP+ modules, providing a cost-effective option that maintains network performance while supporting procurement requirements.

Technical Details of the Transceiver

• Product type: SFP+ transceiver module for 10G Ethernet
• Wavelength: 1541.35 nm
• DWDM channel spacing: 100 GHz
• Distance: Up to 80 km (SMF)
• Fiber type: Single-mode fiber (SMF)
• Connector: LC duplex
• Data rate: 10 Gbps
• DOM: Yes (Digital Optical Monitoring)
• Temperature range: 0 to 70 C
• Form factor: SFP+ hot-plug module
• Compatibility: Brocade and other vendor 10G-SFP+ ports (third-party compatible)
• Compliance: TAA compliant

How to install the Brocade 10G-SFP+ DWDM Transceiver

• Power down the switch or network device and locate an available SFP+ port with a compatible 10G optical interface.
• Insert the transceiver into the SFP+ slot until you hear a gentle click, ensuring the LC connector is oriented correctly for fiber patching.
• Connect the single-mode fiber using a suitable LC duplex fiber patch cord, aligning transmit and receive directions as per your network design.
• Reconnect power and boot the device; verify the transceiver is recognized in the device’s management interface and that the link is established.
• Use the device’s diagnostics tools to confirm optical parameters (signal strength, BER, and DOM readings) and validate 10G connectivity across the DWDM link.

Frequently asked questions

• Q: Is this transceiver compatible with Cisco, Juniper, Arista, or other vendors?
  A: This module is a compatible 10G-SFP+ DWDM transceiver designed to work with Brocade and other vendor ports that support standard 10G SFP+ interfaces. Compatibility can vary by OEM firmware and device model, so verify driver and port support in your specific network equipment. It is commonly used as a cost-effective alternative to OEM modules while delivering equivalent 10G DWDM performance.
• Q: What is the reach of this transceiver?
  A: The transceiver supports up to 80 kilometers over single-mode fiber, enabling long-haul connections between data centers or network nodes with DWDM channel planning at 1541.35 nm.
• Q: What does DOM stand for and what data does it provide?
  A: DOM stands for Digital Optical Monitoring. It provides real-time data such as optical power, temperature, supply voltage, laser bias current, and other optical metrics, helping network administrators monitor link quality and perform proactive maintenance.
• Q: What is the operating temperature range?
  A: The module is rated for 0 to 70 degrees Celsius, making it suitable for standard data center and telecom room environments where ambient temperatures can fluctuate.
• Q: Is this module TAA compliant?
  A: Yes. The transceiver is TAA compliant, meeting the requirements for procurement in many U.S. and global markets, which is important for government and enterprise purchasing protocols.
• Q: What fiber and connector types does it use?
  A: It uses single-mode fiber (SMF) with an LC duplex connector, compatible with typical DWDM deployments that require precise channel spacing and long-haul reach.
• Q: Do I need any special adapters or network equipment considerations?
  A: In most cases, you only need a standard 10G SFP+ port and compatible DWDM-compatible switches or routers. Ensure your network’s DWDM plan aligns with 100 GHz channel spacing and that the target wavelength (1541.35 nm) is supported by your DWDM system.