Brocade (Formerly) 10G-SFP+ DWDM Transceiver — 1547.72nm, 80km, 100GHz, LC, DOM

This high-performance 10G-SFP+ transceiver is engineered for demanding DWDM deployments, delivering 10 Gigabit-per-second throughput over single-mode fiber (SMF) across long distances. Built to replace or complement the Brocade (Formerly) 10G-SFPP-ZRD-1547-72 family, this TAA-compliant module fits standard SFP+ ports with an LC duplex connector and Digital Optical Monitoring (DOM) for proactive network management. The 1547.72 nm wavelength sits on the 100 GHz ITU DWDM grid, enabling precise channel spacing and scalable capacity in data centers, regional networks, and enterprise backbones. With an operating range of 0 to 70°C, it is designed for both controlled data-center environments and field installations that demand reliable performance in varied climates. This transceiver is more than a plug-and-play component; it’s a strategic upgrade that helps preserve existing network investments while enabling modern, high-bandwidth DWDM services across multi-vendor ecosystems.

• High-capacity 10GBASE-DWDM performance enabling 10 Gbps data rates over DWDM-enabled SMF links up to 80 km, ideal for backbones, data-center interconnects, and metro rings where fiber is stretched across campuses or service areas. This module is designed to minimize latency and maintain clean signal integrity over long-haul connections, ensuring reliable performance for time-sensitive applications and high-traffic workloads.
• Wavelength and grid 1547.72 nm on a 100 GHz ITU DWDM grid, allowing precise channel placement with broad compatibility in DWDM architectures. The specified wavelength is optimized for fiber dispersion characteristics, providing predictable performance when multiplexed with adjacent channels in a dense wavelength-division multiplexing network.
• Connector and monitoring LC duplex interface with DOM for real-time optical performance monitoring. Digital Optical Monitoring delivers visibility into transmit power, receive power, temperature, laser bias, and other operational metrics, enabling proactive maintenance, faster fault isolation, and data-driven capacity planning without invasive testing.
• Reliability in challenging environments Operating from 0 to 70°C and designed for data-center racks, telecom installations, and field deployments. The module’s rugged construction and adherence to industry standards ensure dependable operation in varied environments, while its TAA compliance supports procurement in multiple purchasing scenarios.
• Legacy compatibility Engineered to be compatible with Brocade (Formerly) 10G-SFPP-ZRD-1547-72, enabling seamless replacement and upgrade in existing networks. This compatibility helps protect equipment investments, simplifies maintenance windows, and reduces the risk of interoperability challenges in mixed-vendor environments.

Technical Details of Brocade (Formerly) 10G-SFPP-ZRD-1547-72 SFP+ DWDM Transceiver

• Form factor: SFP+ transiently hot-swappable module designed for standardized SFP+ cages and hosts.
• Transceiver type: 10GBASE-DWDM optical transceiver operating over SMF with DWDM channelization.
• Wavelength: 1547.72 nm, part of the 100 GHz ITU DWDM grid for scalable wavelength deployment.
• DWDM grid: 100 GHz ITU-compliant channel spacing to support multi-service networks and future expansions.
• Distance: Up to 80 km under typical network conditions, enabling long-haul links without repeaters.
• Fiber type: Single-Mode Fiber (SMF) optimized for DWDM transmission and low-loss performance.
• Connector: LC duplex to align with standard fiber installations and patch panels.
• DOM: Yes, provides ongoing diagnostics and operating statistics for maintenance and network assurance.
• Operating temperature: 0 to 70°C, suitable for data centers, telecommunications closets, and outside plant enclosures with standard cooling.
• TAA compliance: Yes, designed to meet trade compliance requirements for government and enterprise procurement.
• Compatibility: Specifically designed to be compatible with the Brocade (Formerly) 10G-SFPP-ZRD-1547-72 family and related SFP+ DWDM deployments.

How to install Brocade (Formerly) 10G-SFPP-ZRD-1547-72 SFP+ DWDM Transceiver

• Prepare the slot Power down the host device or place the system in a maintenance window. Ensure the SFP+ slot is clean and free of debris. Ground yourself to prevent electrostatic discharge before handling the module.
• Insert the module Align the transceiver with the SFP+ slot and gently insert until it seats with a soft click. Do not force the module; improper seating can cause damage or misalignment.
• Connect the fiber Attach a clean LC duplex fiber patch cord to the LC connectors on the transceiver and the corresponding device port. Maintain proper fiber polarity and confirm RX/TX orientation according to device labeling.
• Power and verify Re-apply power to the equipment and access the management interface or CLI to verify module presence and link status. Confirm 10GBASE-DWDM operation and check for any alarms or errors.
• Enable DOM and monitor If supported by the network device, enable Digital Optical Monitoring to observe optical power levels, temperature, and other metrics. Use this data for proactive maintenance, plan upgrades, and to detect potential degradation early.
• Configure network parameters Set the appropriate DWDM channel, VLANs, and service profiles in accordance with your DWDM architecture. Ensure alignment with the ITU 100 GHz grid and your wavelength plan to prevent channel conflicts.
• Document and test Record installation details (distance, fiber type, connector, channel, port mapping) and run end-to-end tests to validate throughput, latency, and error rates before putting the link into production.

Frequently asked questions

• What is the primary purpose of this transceiver? It provides 10 Gbps DWDM connectivity over SMF using the 1547.72 nm wavelength, enabling long-haul links up to 80 km and supporting scalable bandwidth in data centers, service providers, and enterprise networks.
• What is DOM and why is it beneficial? Digital Optical Monitoring offers real-time visibility into key optical parameters such as transmit power, receive power, temperature, and device health, allowing operators to detect faults earlier and optimize performance without additional test equipment.
• What environments is the device designed for? The module operates from 0 to 70°C, suitable for standard data-center racks, telecom rooms, and field deployments with adequate cooling and cable management. It is built for reliability in varied conditions.
• What fiber type and connector does it use? It uses Single-Mode Fiber (SMF) with LC duplex connectors, which are common in long-haul DWDM deployments and widely supported by DWDM-capable network equipment.
• Is this transceiver universally compatible across brands? This module is designed to be compatible with networks that accept 10GBASE-DWDM SFP+ modules and specifically to fit Brocade (Formerly) 10G-SFPP-ZRD-1547-72 compatible deployments; always verify device vendor compatibility matrices and firmware requirements before deployment.
• Is it compliant with procurement regulations? Yes, it is TAA compliant, which supports government, enterprise, and educational procurement in the United States and other TAA jurisdictions.
• Can I use this for 40G/100G upgrades? This is a 10G SFP+ transceiver intended for 10G DWDM links. For higher speeds such as 40G or 100G, you would need compatible QSFP+/QSFP28 or CFP modules and DWDM infrastructure designed for those data rates.