Brocade (Formerly) 10G-SFPP-ZRD-1552-52 Compatible SFP+ Transceiver – 10GBase-DWDM, 1552.52nm, 100GHz DWDM, SMF, 80km, LC, DOM, TAA Compliant

Engineered for high-performance fiber networks, this Brocade-compatible 10G-SFP+ transceiver delivers reliable 10GBase-DWDM throughput over single-mode fiber with precision in signaling and reach. With a 1552.52 nm wavelength and 100 GHz DWDM channel spacing, it enables long-haul, high-density connections across metropolitan and enterprise backbones. Designed to fit into SFP+ ports on a broad range of compatible devices, it is an ideal choice for data centers, campus networks, and service providers seeking flexible, cost-effective optical transceivers without sacrificing performance. The module’s LC connector and support for DOM (Digital Optical Monitoring) offer practical visibility into link health and link margin, helping network operators maintain robust service levels. Built to meet the demands of modern DWDM deployments, this transceiver combines compatibility, capacity, and endurance in a single compact form factor.

• 10GBASE-DWDM SFP+ transceiver with a 100 GHz ITU-T channel spacing for dense wavelength-division multiplexing and scalable long-haul connectivity.
• Wavelength of 1552.52 nm (ITU-T DWDM window) optimized for low attenuation and compatibility with standard SMF fiber paths.
• Reach up to 80 km on single-mode fiber (SMF) with a standard LC duplex connector, enabling direct connections between core network devices without additional amplification.
• Digital Optical Monitoring (DOM) support provides real-time insights into optical power levels, temperature, and laser bias for proactive maintenance and quick troubleshooting.
• TA A compliant and hot-swappable, Brocade-compatible SFP+ module designed for broad interoperability across enterprise and service-provider networks, with a focus on reliability and ease of integration.

Technical Details of Brocade (Formerly) 10G-SFPP-ZRD-1552-52 Compatible SFP+ Transceiver

• Transceiver type: SFP+ 10GBASE-DWDM module designed for 10 Gbps Ethernet and related DWDM services.
• Wavelength: 1552.52 nm for DWDM channel compatibility and minimal loss across SMF links.
• DWDM channel spacing: 100 GHz, enabling efficient use of wavelength channels in dense networks.
• Reach: Up to 80 km on standard single-mode fiber (SMF) with LC duplex connector.
• Fiber type: Single-mode fiber (SMF) compatible paths, suitable for metropolitan and long-haul deployments.
• Connector: LC duplex optical connector for easy integration into standard SFP+ host ports and fiber infrastructure.
• DOM: Yes — Digital Optical Monitoring for live monitoring of optical power, temperature, and device health.
• Operating temperature: 0 to 70°C (industrial-grade range suitable for data-center and telecom environments).
• Compliance: TAA compliant, designed for procurement within government and enterprise networks seeking policy-aligned sourcing.
• Compatibility: Designed for Brocade 10G SFP+ host ports and broadly compatible with devices that support 10GBASE-DWDM SFP+ modules; actual interoperability may vary by hardware vendor policy.

how to install Brocade (Formerly) 10G-SFPP-ZRD-1552-52

• Prepare the host device: Ensure the switch or router supports 10GBASE-DWDM SFP+ modules and that the port is in a ready state for installation (hot-swappable or powered-down per vendor guidelines).
• Remove the protective dust cap from the transceiver and inspect the LC connector for cleanliness. If present, use an appropriate fiber-cleaning technique to ensure pristine ends.
• Insert the transceiver firmly into an available SFP+ port until it locks into place. Do not force the module; if it does not seat properly, remove and reinsert.
• Connect the fiber cables: use a clean LC duplex cable to connect the transceiver to the DWDM network path, ensuring correct polarity and secure terminations on both ends.
• Power up or verify the device’s port status: monitor link lights and DOM readouts to confirm synchronization and optical signal quality. If available, run a basic link test or loopback to validate connectivity.
• Enable and monitor the link: verify performance metrics in the device management interface, watch for acceptable power levels, and review DOM data to detect any deviations that may require attention.

Frequently asked questions

• Q: Is this transceiver compatible with Cisco, Huawei, or Juniper devices?
• A: This transceiver is designed to be Brocade-compatible and is widely used in environments that support 10G SFP+ modules. Interoperability with other vendors depends on their policy regarding third-party optics. Always verify current vendor support and warranty terms for your specific hardware.
• Q: What is the significance of 100 GHz DWDM spacing?
• A: 100 GHz spacing refers to the channel width used in DWDM systems. It allows multiple wavelengths to traverse the same fiber path with minimal interference, enabling scalable long-distance networking and efficient use of fiber capacity.
• Q: Does this module support DOM?
• A: Yes. DOM provides real-time monitoring of optical parameters such as transmit power, receive power, temperature, and other diagnostics to help maintain link integrity and performance.
• Q: What is the reach and fiber type?
• A: The transceiver supports up to 80 km on standard single-mode fiber (SMF) with an LC duplex connector, suitable for metro-to-long-haul links depending on network design and amplification/dispersion management.
• Q: Is this module TA A compliant?
• A: Yes. The module is TAA compliant, making it eligible for procurement in government and enterprise projects that require compliant components.