Description
BTI BP1S2P4240L-BTI 3.8V 32Wh Li-Ion Battery for GETAC ZX70 Rugged Tablets
The BTI BP1S2P4240L-BTI 3.8V 32Wh Li-Ion Battery is engineered to power GETAC ZX70 rugged tablets with unwavering reliability in the toughest environments. Built for professionals who demand sustained performance, long life, and safe operation in rugged field conditions, this replacement battery delivers consistent energy when every mission matters. Designed to fit the ZX70 line precisely, it offers OEM-grade quality, safety features, and a dependable power source that keeps critical work moving forward in remote locations, extreme temperatures, and demanding industrial settings.
- Compatibility and precise fit for GETAC ZX70 rugged tablets, ensuring seamless integration without hardware modifications or complex configuration. This BP1S2P4240L-BTI battery installs quickly, restoring full device functionality so teams stay productive in the field.
- High energy density in a compact form factor with a nominal 3.8V and 32Wh capacity. This combination delivers extended runtime between charges, enabling longer surveillance runs, field data collection, and uninterrupted reporting in remote or hostile environments.
- Advanced Li-Ion chemistry paired with robust internal protection features to guard against short circuits, over-discharge, over-temperature, and over-current events. The result is safer operation in fluctuating ambient conditions and improved cycle life for mission-critical devices.
- OEM-grade quality and reliability backed by tested SKUs (441879100012, 441879100003, 44187910000) that align with standard GETAC service parts. Rigorously manufactured to meet or exceed original specifications for consistent performance and long service life.
- Easy replacement and maintenance-friendly design to minimize downtime. The battery is optimized for rapid swap-outs by trained personnel, enabling rapid recovery of device readiness in field deployments, warehouses, or service centers.
Techncial Details of BTI BP1S2P4240L-BTI 3.8V 32Wh Li-Ion Battery for GETAC ZX70
- Battery chemistry: Lithium-Ion (Li-Ion)
- Nominal voltage: 3.8V
- Capacity: 32Wh (approximately 8.4Ah)
- Configuration: BP1S2P4240L
- Compatible devices: GETAC ZX70 rugged tablets
- Part numbers/SKUs: 441879100012, 441879100003, 44187910000
- Usage notes: OEM-grade replacement designed for dependable performance in demanding environments
How to install BTI BP1S2P4240L-BTI
Before you begin, ensure you work in a clean, dry area and use an anti-static wrist strap to avoid damaging sensitive electronics. Power off the GETAC ZX70 device completely and disconnect any external power sources. If the back cover is removable, use the appropriate screwdriver to access the battery compartment, and take care not to damage seals or connectors.
Step 1: Open the ZX70 back cover following the manufacturer’s guidelines. Locate the existing battery and identify the connection harness. Avoid pulling cables or contacting exposed circuitry.
Step 2: Gently disconnect the old battery from its connectors. If your device uses screws or retainer clips, remove them with care and keep fasteners in a labeled container for reassembly.
Step 3: Align the BP1S2P4240L-BTI replacement with the connector in the battery bay. Ensure correct orientation and seating of the connector to prevent misalignment or shorting. Do not force connections; if they don’t seat smoothly, recheck alignment.
Step 4: Secure the replacement battery with any retaining hardware and reattach the back cover or battery bay panel. Reconnect any protective seals or gasket regions to preserve environmental protection where applicable.
Step 5: Power on the ZX70 and allow the device to boot. It may take a few minutes for the system to recognize the new battery. If the device signals a battery calibration prompt, follow the on-screen instructions to calibrate for accurate capacity reporting.
Step 6: Charge fully using an approved charger and avoid deep discharges during the initial cycles. For optimal longevity, perform occasional full charge-discharge cycles as part of routine maintenance, and monitor for any unusual heat or behavior during the first uses after installation.
Safety and tips: Do not puncture or incinerate the battery, and avoid exposing it to prolonged direct sunlight or extreme heat. If the battery becomes swollen, hot, or emits an unusual odor, discontinue use immediately and follow local e-waste disposal guidelines. When storing the battery for extended periods, keep it in a cool, dry place and partially charge (around 40–60%) to preserve cell health.
Frequently asked questions
-
Q: Is this battery compatible with GETAC ZX70 rugged tablets?
A: Yes. The BTI BP1S2P4240L-BTI is designed as a replacement battery for the ZX70 series, providing reliable power and a precise fit to support field operations. -
Q: What is the capacity and voltage of this battery?
A: The battery has a nominal voltage of 3.8V and a capacity of 32Wh (approximately 8.4Ah), delivering extended runtime for demanding tasks without frequent recharging. -
Q: Does this battery include safety protections?
A: Yes. It incorporates protective features typical of high-quality Li-Ion packs, including safeguards against short circuits, over-discharge, and over-temperature conditions to help protect the device and the user. -
Q: What SKUs or part numbers correspond to this battery?
A: The compatible SKUs are 441879100012, 441879100003, and 44187910000, which align with GETAC replacement part references for ZX70 devices. -
Q: How should I dispose of or recycle the battery?
A: Follow local regulatory guidelines for e-waste disposal. Do not dispose of Li-Ion batteries with regular household trash. Many communities offer dedicated battery recycling programs or retailer drop-off services. -
Q: Will I need to recalibrate the battery after installation?
A: In many cases, the device may prompt for calibration. If you notice inaccurate battery readings or unexpected shutdowns, perform a full charge-discharge cycle and recheck.
Customer reviews
Showing - Of Reviews