Description
BTI ET-LAE300-BTI 400W UHM 3000HR PROJECTOR LAMP FOR BARCO
Introducing the BTI ET-LAE300-BTI 400W UHM projector lamp, a premium replacement designed to deliver dependable brightness and vivid color for Barco projection systems. Built to meet exacting performance standards, this lamp provides consistent light output across long runtimes, helping you maintain crisp, clear visuals in corporate presentations, educational environments, and high-traffic venues. With BTI’s engineering and quality control, you gain reliable illumination, reduced downtime, and peace of mind that your Barco projector will perform at its best.
As a direct OEM replacement for ET-LAE300, the BTI ET-LAE300-BTI is engineered for straightforward compatibility with a wide range of Barco projectors. It supports models such as PT-EW540U, PT-EW640T, PT-EW730Z, PT-EW730ZU, PT-EX610, PT-EX800, PT-EX800ZD, PT-EZ580J, PT-EZ770, PT-EZ770ZD, PT-SLW65C, PT-EW540, PT-EW640EL, and PT-EW640U, among others. This broad compatibility ensures easy integration into existing setups, enabling users to replace aging lamps with a trusted BTI component without the need for extensive recalibration or system adjustments. The lamp’s 400W UHM technology is designed to deliver stable brightness and color fidelity from the moment the projector comes online, through continuous use during meetings, seminars, and events.
- Long-lasting brightness: 400W Ultra High Pressure Mercury (UHM) lamp technology delivers strong, consistent brightness with accurate color rendering for extended periods of operation, ensuring your images stay crisp and true-to-life.
- Extended lamp life: Rated around 3000 hours under typical operating conditions, the ET-LAE300-BTI minimizes replacement frequency and lowers the total cost of ownership while maintaining projection quality over time.
- Wide compatibility: A versatile direct replacement for OEM ET-LAE300, this lamp supports a broad array of Barco projector models, including PT-EW540U, PT-EW640T, PT-EW730Z, PT-EW730ZU, PT-EX610, PT-EX800, PT-EX800ZD, PT-EZ580J, PT-EZ770, PT-EZ770ZD, PT-SLW65C, PT-EW540, PT-EW640EL, and PT-EW640U, enabling seamless upgrades within existing deployments.
- OEM-replacement quality: Engineered to match the performance and safety standards of the original ET-LAE300, the BTI lamp delivers reliable light output, precise color consistency, and dependable operation across compatible Barco systems.
- Support and warranty: Includes a 6-month warranty and access to USA-based customer service for timely guidance, installation support, and troubleshooting when needed.
Technical Details of BTI ET-LAE300-BTI 400W UHM 3000HR PROJECTOR LAMP FOR BARCO
- Power: 400W Ultra High Pressure Mercury (UHM) lamp designed for high-intensity projection.
- Estimated lamp life: Approximately 3000 hours under standard operating conditions, providing extended use before replacement is necessary.
- Replacement for OEM: Replaces the Barco ET-LAE300 OEM lamp, ensuring compatibility and straightforward installation.
- Compatibility: Compatible with a wide range of Barco projectors, including ET-LAE300-bearing configurations such as PT-EW540U, PT-EW640T, PT-EW730Z, PT-EW730ZU, PT-EX610, PT-EX800, PT-EX800ZD, PT-EZ580J, PT-EZ770, PT-EZ770ZD, PT-SLW65C, PT-EW540, PT-EW640EL, PT-EW640U, and related models.
- Warranty: 6 months from purchase date, with access to BTI’s support network in the USA.
- Brand: BTI, a trusted name in replacement projector lamps with a focus on compatibility, quality, and consistent performance.
- Support: USA-based customer service center available to assist with installation questions, compatibility checks, and troubleshooting.
How to install BTI ET-LAE300-BTI 400W UHM 3000HR PROJECTOR LAMP FOR BARCO
- Power down the projector and unplug from the power source. Allow the unit to cool completely before handling any lamp components to prevent burns or damage.
- Consult your projector’s manual for the exact lamp module location and the recommended procedure for removing the existing lamp assembly. Carefully release the lamp housing screws and detach the old lamp, taking care not to touch the glass surface.
- Handle the new BTI ET-LAE300-BTI lamp by the exterior housing edges rather than touching the glass. Oils and residues from your fingers can reduce lamp life and performance.
- Align the lamp with the housing’s guides and engage the alignment tabs. Secure the screws firmly but do not overtighten to avoid damage to the lamp or housing.
- Reconnect electrical connectors and securely replace the lamp cover. Power up the projector and reset the lamp timer if required by the projector’s firmware or menu system.
- Perform a brief warm-up to reach stable brightness. Check for uniform illumination, color accuracy, and absence of flicker. If brightness or color appears off, re-seat the lamp and confirm there are no air-path obstructions or dust buildup in the optical path.
- Test the projector with a typical content scene to verify performance across different colors and brightness levels. If issues persist, consult BTI’s customer support for guidance or consider replacing the lamp if it shows signs of premature failure.
- Dispose of the spent lamp according to local regulations and BTI’s disposal guidelines. Proper disposal protects the environment and ensures compliance with safety standards. If you’re within the 6-month warranty window and encounter performance concerns, contact the USA-based support team for assistance.
Frequently asked questions
-
Q: Is the BTI ET-LAE300-BTI compatible with all Barco models?
A: It is designed as a direct replacement for the OEM ET-LAE300 and is compatible with a broad range of Barco projectors listed in the product description, including PT-EW540U, PT-EW640T, PT-EW730Z, PT-EW730ZU, PT-EX610, PT-EX800, PT-EX800ZD, PT-EZ580J, PT-EZ770, PT-EZ770ZD, PT-SLW65C, PT-EW540, PT-EW640EL, and PT-EW640U, among others. -
Q: How long can I expect the lamp to last?
A: The lamp life is approximately 3000 hours under typical operating conditions, though actual life can vary based on usage patterns, cooling efficacy, and running time per day. -
Q: What warranty coverage comes with this lamp?
A: The BTI ET-LAE300-BTI ships with a 6-month warranty, offering protection against manufacturing defects and certain performance issues. Check the warranty terms in the product documentation for specifics. -
Q: Where can I get support if I have installation questions?
A: You can access USA-based customer service for installation guidance, compatibility confirmation, and troubleshooting. They can help ensure correct installation and optimal performance. -
Q: How should I handle and store the lamp when not in use?
A: Store the lamp in a clean, dry environment and handle it by the housing. Avoid touching the glass surface to prevent oil transfer, which can shorten lamp life. Follow local disposal guidelines for spent lamps.
Customer reviews
Showing - Of Reviews