BTI LMP-C120-BTI Projector Lamp for Sony (CS1/CS2/CX1/VPL) – 120W HSCR

Restore sharp brightness, vibrant color, and dependable performance to your Sony projector with the BTI LMP-C120-BTI replacement lamp. Engineered to supersede the original lamp in compatible Sony models, this 120W HSCR lamp delivers consistent brightness, stable color accuracy, and a long-lasting operation that helps you keep presentations, classroom lessons, and home theater sessions thriving. Designed specifically for Sony CS1, CS2, CX1, VPL-CS1, VPL-CS2, and VPL-CX1 projectors, it offers a seamless plug-and-play replacement that minimizes downtime and maximizes uptime for your important content.

Whether you’re refreshing a classroom setup, newsroom briefing room, or a dedicated home theater, this BTI lamp is built to meet high standards of reliability and brightness. By matching the performance characteristics of the original LMP-C120, it ensures compatibility and predictable results across a broad range of Sony projector configurations. With a focus on consistent output, color fidelity, and easier maintenance, the BTI LMP-C120-BTI is a solid choice for ongoing projector performance.

• Compatibility and fit: Engineered to replace the Sony LMP-C120 and to fit Sony models CS1, CS2, CX1, VPL-CS1, VPL-CS2, and VPL-CX1 with precise alignment. This means a straightforward, plug-and-play replacement that preserves the original mounting points, electrical connections, and performance expectations. The aim is to deliver seamless operation without the need for adapters or complex modifications, reducing downtime and the risk of misalignment during installation. You can confidently swap in this lamp as a dependable, cost-effective alternative to the original component.
• Brightness and longevity: The BTI LMP-C120-BTI operates at 120W with a maximum life of up to 2000 hours, helping you maintain bright, clear visuals across long sessions. This translates to less frequent lamp changes in classrooms, conference rooms, or event venues, and more consistent performance from the first use after installation to the end of its service life. Expect crisp text, vivid color, and sharp image definition across a variety of content—from word-heavy slides to high-contrast video material—without abrupt brightness drops.
• Quality and engineering: This replacement lamp is designed to supersede the original in compatible Sony projectors, with attention to reliability and steady output. HSCR technology is leveraged to promote uniform illumination and reduced color drift over time, contributing to steadier color rendering and more even brightness across the projected image. The lamp housing is crafted to resist common failure modes, helping to minimize flicker and image inconsistencies that can occur as lamps age. Overall, it’s built to provide dependable performance across the lamp’s rated life while maintaining a strong value proposition for maintenance budgets.
• Ease of installation: The LMP-C120-BTI is a direct replacement with the same form factor as the OEM lamp, designed for a simple, tool-light swap. Whether you’re updating in a classroom or a home theater setup, you’ll appreciate the straightforward mounting, clean seating, and quick confirmation of secure connections. During installation, follow standard precautions: ensure the projector is powered off and unplugged, allow cooling time, handle the lamp by the housing (not the glass), and re-secure the enclosure after seating the lamp to prevent movement or misalignment during operation.
• Safety and handling: Built with consumer safety in mind, this lamp includes appropriate protective packaging and is designed to minimize risk during installation. To ensure safe use, always power down the projector before handling the lamp, avoid touching the bulb surface with bare hands, and dispose of spent lamps according to local regulations. If you are replacing a lamp in a busy environment, plan downtime to complete installation and perform a brief system check afterward to confirm proper operation and no loose components.

Technical Details of BTI LMP-C120-BTI

• Model: LMP-C120-BTI
• Compatibility: Sony CS1, CS2, CX1, VPL-CS1, VPL-CS2, VPL-CX1
• Power: 120W
• Type: HSCR
• Life: Up to 2000 hours
• Replacement for: LMP-C120

How to install BTI LMP-C120-BTI

• Prepare and safety: Power off the projector, unplug it from the power source, and allow the unit to cool completely before attempting lamp replacement. Gather basic tools if required and wear gloves to avoid transferring oils to the lamp housing.
• Access the lamp: Open the projector’s access panel or lamp cover according to the manufacturer’s instructions. Remove any securing screws or latches that hold the lamp assembly in place, and carefully slide the old lamp out of its socket. Handle the old lamp by the housing and avoid touching the glass surface.
• Install the new lamp: Align the BTI LMP-C120-BTI with the lamp socket and slide it into place until it seats firmly. Reattach any screws or latches to secure the lamp assembly, ensuring that the lamp is firmly seated and not loose within the housing.
• Close and power up: Replace the lamp cover, plug the projector back in, and power it on. If your projector requires a lamp-counter reset, follow the on-screen instructions or the manual to reset the lamp timer so you can track remaining life accurately.
• Test and verify: Run a quick test with content to verify brightness, color accuracy, and stability. Check for any flicker or unusual color shifts. If you notice issues, power down and recheck seating and connections. Allow the lamp to reach its normal operating brightness before performing full-scale use.

Frequently asked questions

• Q: Is the BTI LMP-C120-BTI compatible with Sony CS1, CS2, CX1, VPL-CS1, VPL-CS2, and VPL-CX1?
• A: Yes. This lamp is designed to replace the original LMP-C120 in those Sony models and to deliver equivalent brightness and color performance when installed correctly.
• Q: What is the expected lamp life?
• A: The lamp provides up to 2000 hours of operation under typical usage, though actual life can vary based on usage patterns, brightness settings, and projector cooling.
• Q: What wattage does this lamp use?
• A: It is a 120W HSCR lamp designed to match the performance characteristics of the original LMP-C120 for Sony projectors.
• Q: Do I need to reset the lamp timer after installation?
• A: In many projectors, yes. Consult your model’s manual and perform the lamp timer reset after installation to track remaining life accurately.
• Q: Is installation difficult?
• A: For most users, the BTI LMP-C120-BTI is a straightforward replacement with no extra adapters required. Always refer to the projector’s manual for model-specific instructions if you are unsure.
• Q: Are there safety considerations I should know?
• A: Yes. Always power off and unplug the projector before replacing the lamp, avoid touching the glass with bare hands, and dispose of spent lamps per local regulations. Proper handling reduces the risk of burns or accidental contamination of the lamp.