BUFFALO 2 TB Spare Replacement Hard Drive for LinkStation 220 & 420 and TeraStation 1200 & 1400 — OP-HD2.0BST-3Y

The BUFFALO 2 TB Spare Replacement Hard Drive (OP-HD2.0BST-3Y) is a purpose-built upgrade designed for Buffalo NAS systems. With a native 2 terabyte capacity and a SATA interface, this drive delivers fast, dependable data access while blending seamlessly into your existing LinkStation 220 or 420 and TeraStation 1200 or 1400 environments. If you rely on your Buffalo NAS for family photos, important documents, media libraries, or business backups, this spare drive provides a reliable, ready-to-deploy option to minimize downtime and safeguard your data ecosystem.

Engineered for compatibility and reliability, this spare HDD integrates into Buffalo NAS configurations with minimal fuss. The drive is designed to fit standard internal NAS bays and works as a true spare replacement in supported models, helping you keep operations running smoothly even when a primary drive needs service. Its SATA interface ensures quick data transfer speeds and efficient rebuilds, so you can resume normal operation faster after a drive swap or maintenance window.

When you choose the BUFFALO spare replacement HDD, you’re selecting a solution that prioritizes durability and long-term performance. The drive is built to sustain continuous NAS workloads, from streaming media to archiving backups, with firmware optimizations that support NAS-driven reliability. The 2 TB capacity provides ample room for growing libraries of documents, high-resolution photos, and high-definition videos, while preserving the simplicity of a single, centralized storage device your family or business can trust.

• High-capacity 2 TB storage designed to expand your Buffalo NAS capabilities, enabling robust backups, large media libraries, and scalable storage for documents and archives.
• Fast SATA interface for quick data access, smooth transfers, and efficient drive builds within LinkStation and TeraStation systems.
• Spare replacement design crafted for seamless integration as a hot spare or standby drive in compatible NAS units, minimizing downtime during maintenance or drive failure.
• Reliability and firmware optimization built to withstand NAS workloads, with non-volatile memory and firmware enhancements that support stable performance and long-term durability.
• Broad compatibility with Buffalo NAS specifically tuned for LinkStation 220/420 and TeraStation 1200/1400 series, ensuring plug-and-play replacement without extensive reconfiguration.

Technical Details of BUFFALO 2 TB Spare Replacement Hard Drive

• Capacity: 2 TB
• Drive Interface: SATA
• Drive Type: Internal 3.5-inch HDD
• Form Factor: 3.5" standard internal hard drive for NAS bays
• Model: OP-HD2.0BST-3Y
• Warranty: 3-year limited warranty
• Compatibility: LinkStation 220, LinkStation 420, TeraStation 1200, TeraStation 1400
• Industry-standard reliability designed for NAS use, with firmware and non-volatile memory optimizations supporting consistent performance

How to Install BUFFALO 2 TB Spare Replacement Hard Drive

Installing the BUFFALO 2 TB spare replacement hard drive is straightforward for compatible Buffalo NAS models. Follow these general steps to replace or insert the spare drive into your LinkStation or TeraStation:

• Power down the NAS unit and unplug it from power to prevent any electrical risk or data corruption.
• Open the device’s drive bay cover according to the user manual, locating an available spare slot or a bay suitable for replacing a failed drive.
• Carefully align the 2 TB spare drive with the SATA connectors and mounting holes in the drive bay. Slide the drive gently into position until it is securely seated and the connectors engage.
• Secure the drive with any screws or mounting hardware provided by the NAS enclosure. Re-seat the bay cover if applicable and reconnect the power and network connections.
• Power on the NAS and access the administration interface. Depending on your configuration, you may initialize the drive as a new member of an existing RAID array, designate it as a hot spare, or allow the NAS to handle the drive as part of a rebuild process. Refer to your device’s built-in help or user manual for exact RAID or volume management steps.

Note: While these steps provide a general guide, exact procedures can vary by model and firmware version. If you are upgrading a critical system, consider performing a backup of essential data and consult the NAS documentation for RAID configuration specifics before inserting the spare drive. The BUFFALO 2 TB spare replacement HDD is designed to integrate with supported Buffalo NAS units, delivering a reliable upgrade path with minimal downtime.

Frequently asked questions

• What devices is this drive compatible with? It is designed as a spare replacement for Buffalo LinkStation 220 and 420 as well as TeraStation 1200 and 1400 series. For other Buffalo models, compatibility is not guaranteed, so please verify your NAS model before purchasing.
• What is the warranty on this spare drive? The OP-HD2.0BST-3Y comes with a 3-year limited warranty, reflecting Buffalo’s commitment to reliability for NAS deployments.
• Can I use this 2 TB drive as a primary drive? While it can function as a primary drive in some NAS configurations, it is specifically marketed as a spare replacement suitable for supported LinkStation and TeraStation models. Always confirm RAID and booting requirements in your NAS manual before using as a primary drive.
• Do I need to format the drive before use? In most NAS setups, the device will initialize and format the drive as part of the RAID or storage pool creation process. If you add it as a spare, the NAS will often format it automatically when it is used to rebuild a array. If required, follow the NAS setup wizard to format the drive within the proper storage pool context.
• What performance benefits does 2 TB offer? The 2 TB capacity provides ample space for large media libraries, backups, and business data. The SATA interface supports reliable, steady data transfer rates ideal for NAS environments, and the drive is optimized for ongoing NAS workloads.