Cisco 1.20 TB 2.5-inch SAS Internal Hard Drive

Discover a robust storage solution designed for demanding IT environments: the Cisco 1.20 TB Hard Drive in a compact 2.5-inch form factor with a high-speed SAS interface. Built for reliability, scalability, and steady performance in data centers, virtualization clusters, and enterprise server ecosystems, this drive delivers enterprise-grade storage capacity in a compact footprint. Whether you’re expanding a Cisco storage array, upgrading a server rack, or building a resilient backup strategy, this internal hard drive offers the speed, endurance, and compatibility needed to keep data accessible, workloads flowing, and downtime to a minimum.

• High-capacity storage for demanding workloads: 1.20 TB of reliable, on-premises capacity to support databases, virtual machines, large-scale file shares, and data-intensive applications without frequent upgrades.
• 2.5-inch internal drive with SAS 12Gb/s interface: A compact, enterprise-grade solution that pairs a small footprint with blazing fast data transfer rates, enabling dense server configurations and rapid data access.
• Enterprise reliability for 24/7 operations: Engineered to withstand continuous workloads, consistent throughput, and the rigorous demands of data centers, ensuring predictable performance over time.
• Broad compatibility within Cisco and enterprise ecosystems: Designed to integrate smoothly with Cisco storage platforms, servers, and common enterprise RAID environments, reducing integration risk.
• Ideal for RAID arrays, backups, and data growth: Optimized for RAID configurations and long-term data retention, supporting scalable storage expansion and dependable disaster recovery planning.

Technical Details of Cisco 1.20 TB Hard Drive

• Capacity: 1.20 TB
• Form factor: 2.5-inch internal drive
• Interface: SAS 12Gb/s
• Usage: Enterprise-grade storage for servers and storage arrays
• Environment: Built for reliability and steadiness under heavy workloads

How to Install Cisco 1.20 TB Hard Drive

Installing the Cisco 1.20 TB Hard Drive is a straightforward process that follows standard procedures for 2.5-inch SAS drives in enterprise servers and storage arrays. The steps below offer a general guide to help you add this drive to a compatible chassis or RAID controller.

Step 1: Power down and prepare

Power down the server or storage enclosure according to the manufacturer’s guidelines. Ground yourself to avoid static discharge and review the chassis documentation to identify available drive bays and compatible backplanes for SAS drives.

Step 2: Identify a suitable drive bay

Locate an empty 2.5-inch drive bay in the chassis, ensuring the bay supports SAS hot-swap if your deployment requires it. Confirm the backplane or storage controller is compatible with the drive’s form factor and interface.

Step 3: Connect and insert

Carefully connect the drive to the backplane or directly to the SAS controller as specified by your hardware. Slide the drive into the bay until it seats firmly, and secure any retaining screws or latches per the chassis design. If your system supports hot-swap, remove and insert the drive without powering down, following the equipment’s safety guidelines.

Step 4: Initialize and configure

Power on the system and enter the RAID controller or OS storage management utility. Detect the new drive, initialize it if required, and add it to an existing RAID volume or create a new logical drive. Configure the desired stripe size, parity, and caching settings appropriate for your workload and fault-tolerance requirements.

Step 5: Format and verify

Format the new logical drive with the appropriate file system for your environment (e.g., NTFS, XFS, or other supported formats). Run a verification check or a short surface scan to ensure the drive is healthy, and monitor SMART data if your management software provides it to preempt potential failures.

Step 6: Deploy and optimize

Update any relevant storage policies, backup jobs, or virtualization storage settings to incorporate the new capacity. Monitor performance metrics such as IOPS, latency, and throughput to confirm that the drive meets your service levels and adjust RAID or caching configurations if necessary.

Frequently asked questions

Q: What is the storage capacity of this Cisco hard drive?

A: The drive offers 1.20 TB of storage capacity, suitable for a range of enterprise workloads, from database files to virtual machine images and large data archives.

Q: What form factor and interface does the drive use?

A: It is a 2.5-inch internal hard drive with a SAS 12Gb/s interface, designed for compact deployments and high-speed data transfer within enterprise servers and storage arrays.

Q: Is this drive recommended for 24/7 operation?

A: Yes. It is engineered for reliability and sustained performance in demanding, always-on environments such as data centers, virtualization clusters, and mission-critical storage systems.

Q: Can I use this drive in Cisco storage systems with existing RAID configurations?

A: The drive is designed to be compatible with Cisco storage platforms and common enterprise RAID configurations, enabling seamless integration into existing storage infrastructures.

Q: What are the best practices for installing a 2.5-inch SAS drive?

A: Power down as required unless using hot-swap capable hardware, insert into a compatible drive bay, connect to the SAS backplane or controller, initialize and format through your management interface, and monitor the drive’s health and performance over time.