Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN, Network Interface Module

CiscoSKU: 7255198

Price:
Sale price$1,066.47

Description

Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN, Network Interface Module

The Cisco Catalyst 8000 family brings high-density, modular connectivity to the edge with this 1-port WAN Network Interface Module (NIM) for RJ-45 copper copper-based WAN links. Designed to slot into Catalyst 8300 and 8200 Series Edge Platforms, this NIM delivers flexible WAN access at 2.5 Gbps and 1 Gbps through a single copper RJ-45 connector, enabling streamlined branch connectivity, secure Internet access, and resilient enterprise WAN architectures. Built to work with Cisco IOS XE, the module integrates smoothly with Cisco’s security, QoS, and routing capabilities, helping organizations optimize performance without sacrificing reliability or manageability. It’s engineered to be hot-swappable, so you can upgrade or replace components with minimal downtime while preserving continuity for critical applications and services. With backward compatibility to multiple Ethernet speeds, this NIM supports a broad range of deployment scenarios—from legacy 100 Mbps links to modern 2.5 Gbps WAN connections—giving you the bandwidth you need today with a clear upgrade path for tomorrow.

  • High-speed copper WAN interface: This 1-port NIM provides 2.5-Gbps and 1-Gbps Ethernet over copper RJ-45 (2.5GBASE-T/1GBASE-T) with automatic negotiation to ensure the best possible link speed, duplex mode, and reliability for WAN edge connections.
  • Broad speed compatibility: Supports a spectrum of Ethernet rates including 100 Mbps, 1 Gbps, and 2.5 Gbps, enabling seamless integration into mixed environments and easy migration from older infrastructures to higher-bandwidth links without replacing existing cabling or equipment.
  • Platform compatibility and deployment: Specifically designed for Cisco Catalyst 8300 and 8200 Series Edge Platforms, allowing customers to consolidate network functions at the edge while maintaining Cisco’s unified management and security model.
  • Reliability and manageability: Built with Cisco-grade hardware reliability and integrated into IOS XE, offering simplified configuration, centralized monitoring, and compatibility with Cisco QoS, security, and routing features for consistent policy enforcement across the WAN.
  • Flexible maintenance and upgrades: The module is hot-swappable, enabling quick replacement or upgrades without powering down the platform—minimizing downtime and preserving business continuity during network changes or capacity expansions.

Technical Details of Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN, Network Interface Module

Technical details for this Cisco NIM are defined in the specifications section of the vendor’s catalog, with the exact information accessible via the product’s UPC or SKU on ec.synnex.com. This section highlights how the NIC integrates into Catalyst 8300 and 8200 edge platforms, the supported Ethernet standards for copper RJ-45, and how the module interacts with Cisco IOS XE software for configuration and operational management. For precise product identifiers, including model numbers, compatibility notes, and regulatory details, refer to the vendor’s official specifications page using the correct UPC/SKU reference.

How to install Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN, Network Interface Module

Installing the Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN NIM is a straightforward process when you follow proper safety and equipment-handling practices. Below is a practical, step-by-step guide designed for IT professionals working with Catalyst 8300 and 8200 Series Edge Platforms. Always consult your product-specific manuals for any model-specific cautions or prerequisites.

  • Prepare the chassis and module: Ensure the Catalyst 8300 or 8200 chassis is powered down according to your organization’s change-management procedures. Verify that you have an available NIM slot and that you are using a supported Cisco NIM for this platform. Gather the appropriate RJ-45 cabling (Cat5e/Cat6/Category appropriate to your 2.5GBASE-T link) and any required rack-mounting hardware or grounding straps.
  • Open and inspect the slot: Remove the slot cover or blank, if applicable, and inspect the slot for any debris or physical obstructions. Handle the NIM by its edges, avoiding contact with connector pins to prevent electrostatic discharge or physical damage.
  • Insert the NIM: Align the NIM with the slot and slide it in firmly until it seats. You may feel a slight click or resistance as the connector engages. If your platform uses retention screws or a latch, secure the NIM according to the platform’s guidelines to prevent movement or disconnection during operation.
  • Apply initial power and verify recognition: Power on the chassis and monitor the console or management interface. Use the appropriate Cisco IOS XE commands to confirm that the NIM is detected (for example, show inventory or show version equivalents on your device). If necessary, perform any initial configuration to assign the interface to a suitable routing context or VRF.
  • Configure the WAN interface and test connectivity: In IOS XE, configure the RJ-45 interface with the desired IP addressing, subnet, and routing policy. Enable speed and duplex settings as required, typically via auto-negotiation for copper interfaces. Validate connectivity with ping/traceroute tests to WAN endpoints and monitor link reliability, error counters, and throughput to ensure the link meets your performance requirements.

Frequently asked questions

  • What speeds does this NIM support? The module provides copper RJ-45 WAN connectivity at 2.5 Gbps and 1 Gbps, with backward compatibility to lower speeds such as 100 Mbps where supported by the link negotiation. Auto-negotiation ensures the best available link speed based on the connected device and cabling.
  • Is this NIM hot-swappable? Yes. The design supports hot-swapping, allowing you to replace or upgrade the module without powering down the entire platform, which minimizes downtime during maintenance or capacity upgrades.
  • Which Cisco platforms is it compatible with? This NIM is intended for Cisco Catalyst 8300 and 8200 Series Edge Platforms, aligning with Cisco IOS XE and the company’s security and QoS frameworks for WAN edge deployments.
  • What cabling is required? A copper RJ-45 Ethernet cable (Cat5e/Cat6 or higher, depending on your network standards and desired link speed) is used to connect to the WAN. Ensure the cable length and quality meet your network’s performance requirements to maintain stable 2.5 Gbps or 1 Gbps links.
  • Can it work with existing Cisco devices or non-Cisco hardware? The NIM is designed to work within the Cisco Catalyst edge ecosystem. For optimal performance and policy consistency, integrate within Cisco IOS XE-managed networks. Some transitional configurations may be possible with careful planning, but full feature compatibility is ensured within Cisco platforms.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed