Cisco 128GB (2 x 64GB) DDR3 SDRAM Memory Kit

CiscoSKU: 11012416

Price:
Sale price$3,889.08

Description

Cisco 128GB (2 x 64GB) DDR3 SDRAM Memory Kit

The Cisco 128GB (2 x 64GB) DDR3 SDRAM Memory Kit is a high-performance memory upgrade designed for demanding server workloads. This dual-module kit combines 128 GB of total memory with ECC protection and a Load-Reduced DIMM (LRDIMM) architecture to deliver reliable, scalable, and energy-efficient performance for data centers, virtualization hosts, databases, and mission-critical applications. Clocked at up to DDR3-1600 with CL11 latency and operating at 1.50 V, this kit provides the speed and stability needed to accelerate heavy-duty processes while maintaining data integrity in enterprise environments. Whether you are expanding memory in Cisco servers or deploying compatible enterprise systems, this kit helps you achieve smoother multi-tasking, faster application responses, and improved virtualization density without sacrificing reliability.

  • Massive capacity for peak workloads: 128 GB of total memory provided as 2 x 64 GB DIMMs empowers servers to handle large in-memory databases, memory-intensive virtualization, and complex analytics with fewer I/O bottlenecks.
  • DDR3-1600 speed with low latency: Up to 1600 MHz data transfer rate and CL11 latency deliver faster data access, reduced wait times, and improved overall application responsiveness for enterprise-grade workloads.
  • ECC protection for data integrity: Built-in error-correcting code helps detect and correct single-bit errors, increasing reliability for critical applications, uptime-sensitive services, and long-running processes.
  • LRDIMM architecture for efficiency and stability: Load-Reduced DIMMs reduce memory bus load and power requirements per module, enabling better thermal performance and stability in dense server environments.
  • Low-voltage operation and energy efficiency: Operating at 1.50 V, this memory kit supports cooler operation and potentially lower total cost of ownership in data centers while maintaining high-performance capability.

Technical Details of Cisco 128GB (2 x 64GB) DDR3 SDRAM Memory Kit

  • Memory type: DDR3 SDRAM with ECC
  • Total capacity: 128 GB (2 x 64 GB)
  • Module type: LRDIMM (Load-Reduced DIMM)
  • Speed: DDR3-1600 (PC3-12800)
  • Latency: CL11
  • Voltage: 1.50 V
  • Form factor: DIMM
  • ECC: Yes, for data integrity and reliability
  • Ranking/architecture: LRDIMM with enterprise-grade stability
  • Compatibility: Designed for Cisco servers and other enterprise systems that support DDR3-1600 ECC LRDIMM
  • Applications: Virtualization hosts, databases, in-memory analytics, ERP/CRM workloads, and other memory-intensive server tasks

How to install Cisco 128GB DDR3 SDRAM Memory Kit

  • Power down the server completely and unplug from all power sources. Disabling power and disconnecting cables reduces the risk of electrical shock and prevents board damage.
  • Ground yourself to discharge any static electricity before handling memory modules. Use an anti-static wrist strap or touch a grounded metal surface.
  • Open the server chassis and locate the memory slots or elbow banks as specified by the system manual. Ensure you are installing into DDR3-1600 ECC LRDIMM-compatible slots in the correct channel configuration.
  • Orient the memory modules so the notch aligns with the slot keys. Carefully insert the modules at the correct angle and then press down evenly until the latches click and the modules are firmly seated.
  • For best results, install the 2 x 64 GB modules into the primary memory channels recommended by the motherboard or server platform to enable proper memory interleaving and optimal bandwidth.
  • Close the memory door or panel, replace any covers, and reassemble the server chassis. Reconnect power and boot the system.
  • Enter the system BIOS or UEFI setup on boot and verify that the 128 GB total memory is detected and correctly reported as 2 x 64 GB ECC LRDIMM modules.
  • Optionally run a memory diagnostic or stress test to confirm stability under your expected workload. Monitor for any ECC error reports or thermal issues during initial operation.

Frequently asked questions

Q: Is this memory kit ECC-enabled and compatible with Cisco servers?

A: Yes. The Cisco 128GB DDR3 SDRAM Memory Kit features ECC protection and LRDIMM architecture designed to enhance reliability in enterprise server environments. It is intended for Cisco servers and other systems that support DDR3-1600 ECC LRDIMM modules. Always verify compatibility with your specific server model and motherboard documentation before purchase.

Q: What workloads benefit most from this kit?

A: Heavy-duty workloads such as large-scale virtualization (multiple VMs per host), in-memory databases, data analytics, ERP/CRM platforms, and dense multi-user applications benefit from the large 128 GB memory capacity, higher bandwidth, and improved resilience provided by ECC and LRDIMM technology.

Q: What is the operating voltage and performance characteristics?

A: The memory kit operates at 1.50 V and delivers DDR3-1600 MHz data transfer with CL11 latency. This combination offers strong performance with efficient energy use, contributing to cooler operation in multi-slot server configurations while maintaining low latency for faster data access.

Q: How do I ensure proper installation and stability?

A: Ensure compatibility with your server and the correct slot configuration, handle modules with care to avoid physical damage, and verify detection in BIOS/UEFI after installation. Running memory diagnostics or a stress test during the initial deployment helps confirm stability and ECC functionality.


Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed