Cisco 128GB DDR4 SDRAM Memory Module

The Cisco 128GB DDR4 SDRAM Memory Module is engineered to offer exceptional performance and reliability for demanding server environments. This refurbished memory module is specifically designed to meet the rigorous demands of heavy-duty applications, ensuring your system operates at peak efficiency. With impressive specifications and cutting-edge technology, the Cisco memory module serves as a dependable solution for any server setup, enabling it to handle complex tasks seamlessly.

• Large Capacity: Featuring an extensive 128 GB of memory, this module provides ample space for running complex applications without lag, empowering your system to achieve approximately 10K MIPS, making it a powerhouse for multitasking scenarios.
• High Speed: Operating at a speed of 2666 MHz, the DDR4-2666/PC4-21300 interface synchronizes electrical and clock signals, ensuring efficient data transfer rates that enhance overall system performance.
• Registered DIMM: This memory module utilizes a registered signal, which boosts system performance and reliability, making it particularly well-suited for demanding server applications.
• 288-Pin Design: The 288-pin DIMM form factor reduces the load on the server memory bus while providing faster and more dependable data access, ensuring efficient operation in high-demand environments.
• ECC Support: With built-in error-correcting code (ECC) functionality, this memory module automatically detects and corrects memory errors, safeguarding your critical data and applications from corruption.

Technical Details of the Product

• Memory Size: 128 GB
• Memory Type: DDR4 SDRAM
• Memory Speed: 2666 MHz
• Voltage: 1.20 V
• Form Factor: DIMM
• Pin Count: 288-pin
• ECC: Yes
• Type: Registered

How to Install

1. Power off your server and unplug it from the wall outlet.
2. Open the server case to access the memory slots.
3. Locate the DIMM slots on the motherboard.
4. If there are existing memory modules, gently release the clips on either side to remove them.
5. Align the notch on the Cisco 128GB DDR4 SDRAM Memory Module with the slot on the motherboard.
6. Firmly press down the module until the clips click into place, securing the memory module.
7. Close the server case and reconnect it to the power source.
8. Power on the server and check the BIOS/UEFI settings to ensure the memory is recognized correctly.

Frequently Asked Questions

1. What is the benefit of using ECC memory?

ECC memory automatically detects and corrects data corruption, enhancing the reliability and stability of your server's operations, making it essential for mission-critical applications.

2. Is this memory module compatible with all servers?

While the Cisco 128GB DDR4 SDRAM Memory Module is designed to be compatible with most server systems that support DDR4, it is advisable to check your server's specifications to ensure compatibility.

3. Can I mix this memory module with other memory types?

It is recommended to use memory modules of the same type, size, and speed for optimal performance. Mixing different memory types can lead to system instability or reduced performance.

4. Will I notice a significant performance increase with this upgrade?

Yes, upgrading to 128GB of DDR4 SDRAM will provide a significant boost in performance, particularly for applications requiring high memory usage or multitasking capabilities.

5. What does refurbished mean for this memory module?

This means the memory module has been restored to like-new condition, tested for performance, and is backed by a warranty, making it a cost-effective solution for enhancing your server's capabilities.