Cisco 16 TB Hard Drive - 3.5" Internal - SAS (12Gb/s SAS)

Upgrade your data center with the Cisco 16 TB Hard Drive, a purpose-built 3.5" internal SAS hard disk designed to deliver dependable, scalable storage for enterprise workloads. This high-capacity drive is engineered to meet the rigors of modern data centers, offering a robust combination of capacity, reliability, and performance that Cisco customers rely on for mission-critical applications. Whether you’re expanding a storage array, refreshing an aging fleet of disks, or architecting a high-uptime virtualization environment, this 16 TB SAS hard drive is built to handle demanding workloads while maintaining steady, consistent performance. It’s the type of storage component that data-driven organizations trust to keep databases, file shares, backups, and streaming workloads running smoothly.

• Massive 16 TB capacity: Designed to maximize usable storage in a single drive, the Cisco 16 TB HDD helps you consolidate data stores, scale out capacity, and reduce the number of disks required in dense storage arrays. This translates to lower operational complexity and more efficient use of rack space in data centers and private clouds.
• 12Gb/s SAS interface for fast, reliable data transfer: The drive uses the Serial Attached SCSI interface (SAS) at 12 Gb/s, delivering high throughput with strong I/O performance, low latency, and compatibility with enterprise storage controllers. This makes it suitable for demanding workloads such as database transactions, virtualization, and large-scale backup operations.
• 3.5-inch internal form factor for standard enterprise enclosures: The drive follows a familiar 3.5" standard, allowing straightforward integration into Cisco-supported storage arrays, servers, and rack-mount enclosures. Its form factor is optimized for hot-plug capability and easy replacement in busy data center environments.
• Enterprise-grade design for reliability and consistent uptime: Built to meet the reliability requirements of data centers, this Cisco HDD is engineered for sustained performance under heavy workloads. Expect robust error correction, advanced wear leveling, and a design that supports extended operating lifespans in 24/7 environments.
• Energy-conscious operation and long-term cost efficiency: While delivering substantial capacity and performance, the drive is designed with power efficiency in mind, helping lower total cost of ownership (TCO) by reducing energy consumption and cooling needs in dense storage deployments.

Technical Details of Cisco 16 TB Hard Drive

• Capacity: 16 TB
• Interface: 12 Gb/s SAS
• Form Factor: 3.5-inch Internal
• Drive Type: Hard Disk Drive (HDD)
• Designed for: Enterprise data centers, storage arrays, and high-demand applications

how to install Cisco 16 TB Hard Drive

• Prepare the hardware: Power down the server or storage chassis and disconnect power. If you are replacing an existing drive, note the drive bay location and ensure you have a compatible drive tray for your enclosure.
• Insert into the drive tray: Slide the Cisco 16 TB SAS HDD into an available 3.5" drive tray. Secure the drive with the tray screws or latches as required by your enclosure. Ensure the SATA/SAS interface connector aligns properly with the backplane or controller.
• Connect and secure: Reinstall the tray into the chassis, ensuring the backplane connection is firm. Fasten any cage or latch mechanisms to keep the drive firmly seated during operation.
• Power up and configure: Power on the system and enter the storage controller or RAID management interface. Initialize the new drive, assign it to the appropriate array or pool, and perform any necessary parity checks or scrubbing as dictated by your storage policy.
• Verify health and performance: Run a quick health check using the controller’s diagnostics or vendor-provided tools. Confirm that the drive reports correctly in the array, monitor SMART attributes if available, and validate throughput with representative workloads to ensure the drive meets your performance expectations.

Frequently asked questions

Q: What is the capacity of this Cisco hard drive?

A: The drive offers a capacity of 16 TB, making it well-suited for dense storage needs, archival purposes, and large-scale virtualized environments where space efficiency matters alongside performance.

Q: What interface does this drive use?

A: It uses a 12 Gb/s SAS interface, providing high-bandwidth data transfer suitable for enterprise storage controllers and backplanes. This interface is designed for reliability and compatibility with Cisco storage solutions and other SAS-capable controllers.

Q: What form factor is the drive?

A: The drive has a standard 3.5-inch internal form factor, which fits most enterprise disk bays and hot-plug backplanes commonly deployed in data centers and storage arrays.

Q: Is this drive intended for mission-critical workloads?

A: Yes. The Cisco 16 TB SAS HDD is engineered for enterprise-grade reliability and sustained performance under heavy workloads, making it a solid choice for databases, virtualization, backup and recovery, file shares, and large-scale archival systems.

Q: How should I deploy this drive in a storage array?

A: The drive should be deployed in compatible Cisco storage arrays or any SAS-enabled storage environment that supports 3.5-inch enterprise disks. Consider using it as part of a RAID configuration or storage pool that aligns with your redundancy, performance, and capacity objectives. Always follow your vendor’s installation guidelines and perform health checks after integration.

Note: Specifications can vary by model revision or regional packaging. For precise compatibility and warranty details, refer to the official Cisco product documentation and your storage controller’s compatibility matrix. This description provides a high-level overview of features and intended use cases for enterprise deployments.