Cisco 3.80 TB SAS 2.5-Inch Solid State Drive — Enterprise-Grade Performance

The Cisco 3.80 TB Solid State Drive is engineered for modern data environments that demand speed, reliability, and capacity in a compact, 2.5-inch form factor. This internal SAS SSD merges high-performance flash with enterprise-grade reliability to power databases, virtualization, analytics, and hyper-converged infrastructures. Built to work within Cisco data center ecosystems, it delivers resilient, consistent throughput for latency-sensitive workloads while helping you optimize rack space and total cost of ownership. With a generous 3.8 terabytes of solid-state storage and a robust 12 Gb/s SAS interface, this drive is a core component for modern storage architectures that require both speed and scale.

• Massive 3.8 TB capacity in a compact 2.5-inch form factor to maximize storage density in data centers and enterprise servers.
• Designed for high-performance enterprise workloads with a 12 Gb/s SAS interface that delivers low latency and steady throughput for databases, virtualized environments, and analytics.
• Enterprise-grade reliability and endurance to handle long-term, mission-critical workloads while maintaining data integrity under heavy I/O.
• Power-efficient operation and thermal management suitable for dense server deployments, reducing cooling needs and operational costs.
• Seamless integration with Cisco storage backplanes, controllers, and data center ecosystems for straightforward deployment and consistent management.

Technical Details of Cisco 3.80 TB Solid State Drive

• Capacity: 3.80 TB
• Form Factor: 2.5-inch internal drive
• Interface: SAS 12 Gb/s
• Drive Type: Solid State Drive (SSD)
• Product Type: Internal 2.5" SAS SSD for enterprise storage arrays and server backplanes

how to install Cisco 3.80 TB Solid State Drive

Installing this Cisco SAS SSD is straightforward in compatible servers, storage arrays, or backplanes. Follow these general steps to ensure a safe and successful deployment:

1. Prepare the system: Power down the server or ensure the chassis supports hot-swapping for SAS drives. Ground yourself to prevent static discharge and gather the necessary tools and mounting hardware.

2. Access the drive bay: Open the server or storage enclosure and locate the appropriate 2.5-inch drive slot or drive cage. Remove any existing caddy if you are replacing a drive, and inspect the backplane interface to confirm SAS compatibility.

3. Install the drive: Carefully insert the Cisco 3.80 TB SAS SSD into the drive cage or backplane slot. Secure the drive with the mounting screws or retention mechanism provided by the chassis to prevent movement during operation.

4. Connect the interface: Attach the SAS data and, if applicable, power cables to the drive. Ensure a firm connection at the backplane and controller to support reliable data transfer at 12 Gb/s speeds.

5. Power on and configure: Power up the system and enter the storage controller or BIOS/UEFI configuration utility. Initialize the new drive, create or extend a logical volume as needed, and assign the appropriate hotspares or RAID configuration if your environment requires it. In the operating system, partition, format, and mount the drive according to your workload requirements.

6. Verify health and readiness: Use the storage controller’s health monitoring tools or management software to verify the drive status, SMART attributes, and overall health. Run a basic read/write test if your environment requires verification of performance characteristics.

7. Update as needed: Keep firmware and driver updates current through Cisco and controller vendor channels to maximize compatibility, performance, and reliability with ongoing workloads.

Frequently asked questions

• Q: What is the capacity of this drive?
  A: The Cisco drive offers 3.80 TB of usable solid-state storage in a 2.5-inch internal form factor, designed for dense data center deployments.
• Q: What interface does it use?
  A: It uses a SAS 12 Gb/s interface, enabling high-throughput data transfer and low-latency performance in enterprise environments.
• Q: Is this drive suitable for databases and virtualization?
  A: Yes. The 3.80 TB SAS SSD is intended for high-performance workloads such as databases, virtualization platforms, analytics, and hyper-converged infrastructure, where fast I/O and reliable endurance are essential.
• Q: Can the drive be hot-swapped?
  A: In most Cisco-compatible servers and backplanes that support hot-swapping, this SAS SSD can be replaced without powering down the system. Always follow your chassis and controller guidelines for hot-swap operations.
• Q: How do I ensure best reliability?
  A: Use appropriate RAID or storage controller configurations, monitor drive health with the controller's management tools, maintain firmware updates, and follow standard data-center practices for redundancy and backups to maximize reliability and data integrity.