Description
Experience enterprise-grade storage speed and reliability with Cisco’s 600 GB 2.5" internal SAS hard drive. Engineered for demanding server environments, this drive delivers rapid data access, consistent performance under heavy workloads, and scalable storage for virtualization, databases, and mission-critical applications. With a 15,000 RPM spindle and a 12 Gb/s SAS interface, it minimizes latency and accelerates I/O-intensive tasks, helping data centers meet tight service-level agreements. The compact 2.5" form factor is designed for dense server chassis, hot-swap bays, and streamlined cabling in modern enterprise deployments. Whether refreshing aging storage, building out high-performance RAID arrays, or provisioning a dedicated scratch disk for critical workloads, this Cisco drive is built to keep your business running smoothly.
- High-speed 15,000 RPM spindle delivers low latency and fast I/O, accelerating databases, virtualization workloads, and transactional operations while improving boot times and application responsiveness.
- 12 Gb/s SAS interface with dual-port capability provides robust throughput and built-in redundancy, enabling multiple data paths for enhanced availability in enterprise storage arrays.
- Compact 2.5-inch form factor enables higher rack density in servers and storage enclosures, improves airflow, and simplifies cabling in dense data-center deployments for better overall efficiency.
- Enterprise-grade reliability designed for continuous operation, helping to reduce downtime and support business continuity across virtualized hosts, ERP systems, and mission-critical databases.
- Versatile for RAID configurations, operating system drives, scratch disks, and virtualization images, delivering dependable performance and scalable storage for growing data-center needs.
Technical Details of Cisco 600 GB Hard Drive - 2.5" Internal - SAS (12Gb/s SAS)
- Capacity: 600 GB
- Form Factor: 2.5 inches
- Interface: SAS (12Gb/s)
- Spindle Speed: 15,000 RPM
- Server Compatibility: Server device supported
- Memory Type: Non-volatile memory
- Data Transfer Rate: High-throughput SAS interface designed for rapid data access
- Usage: Enterprise-grade hard drive suitable for server
How to install Cisco 600 GB Hard Drive - 2.5" Internal - SAS
- Power down the server completely and unplug the power cord. Ground yourself to prevent electrostatic discharge (ESD) before handling any components.
- Identify an available 2.5" SAS drive bay or hot-swap backplane slot that is compatible with your server chassis and storage array.
- If needed, remove the existing drive tray or sled from the target bay. Align the Cisco 600 GB SAS drive with the backplane connectors and slide it into the bay until seated securely.
- Secure the drive tray with the appropriate screws or locking mechanism, ensuring a snug fit and proper airflow around the drive.
- Connect the SAS data and power interfaces (or seat the drive into the hot-swap backplane). Confirm that the backplane recognizes the new drive and that the indicators show activity or readiness.
- Power on the server and enter the RAID controller or storage management utility. Configure the new drive as a standalone member or add it to an existing array as required by your deployment.
- Initialize the disk, run a SMART health check, and format or initialize the volume according to your deployment (RAID level, filesystem, and operating system requirements).
- Update firmware on the drive if a newer version is available and verify that the drive is functioning within expected performance parameters under typical workloads.
Frequently asked questions
-
Q: What capacity does this Cisco drive offer?
A: It provides 600 GB of usable storage in a compact 2.5" form factor, ideal for OS disks, databases, and high-transaction workloads. -
Q: What is the interface and its speed?
A: The drive uses a SAS interface at 12 Gb/s, with a dual-port design to support redundancy and high-throughput data paths in enterprise storage environments. -
Q: What workloads is this drive best suited for?
A: It is engineered for enterprise server workloads, including operating systems, databases, virtualization images, logs, and other I/O-intensive applications requiring consistent performance. -
Q: Can this drive be used in hot-swap backplanes?
A: Yes. The 2.5" form factor is designed for dense servers and hot-swap bays, enabling easy maintenance and rapid replacement without powering down the system. -
Q: Is this drive appropriate for RAID configurations?
A: Absolutely. The drive is optimized for RAID deployments and enterprise storage arrays, providing reliable performance and data integrity in multi-drive configurations. -
Q: Does it support data redundancy features?
A: The SAS interface supports dual-port operation, which enables multipath I/O and improved redundancy when used with compatible RAID controllers and backplanes.
Customer reviews
Showing - Of Reviews
