Description
Engineered for modern data centers and enterprise networks, the Cisco 93360YC-FX2 Layer 3 Switch is a remanufactured, fixed-form-factor member of the Nexus 9300-FX2 family built on Cisco Cloud Scale technology. Designed to power cloud-scale deployments, it delivers wire-speed routing, dense port options, and deep telemetry alongside robust security features. This device is purpose-built for organizations demanding deterministic performance, ultra-low latency, and scalable policy enforcement across large-scale virtualization, multi-tenant fabrics, and dynamic workloads. The 93360YC-FX2 blends reliability with operational simplicity, enabling you to scale out with confidence while maintaining predictable network behavior. With its integrated software capabilities and fixed form factor, it supports advanced Layer 3 routing, multi-protocol support, and seamless integration with Cisco’s automation and telemetry ecosystem. It is an ideal fit for data centers, campus distribution, and service provider edge deployments that require robust interconnectivity, granular traffic engineering, and scalable security policies. The FX2 series emphasizes cost-effectiveness for cloud-scale deployments while delivering observable, programmable networking that aligns with today’s hybrid IT architectures.
- Wire-speed Layer 3 routing in a dense fixed switch: Achieve deterministic performance with high-capacity routing at line rate, enabling scalable enterprise and data-center networks without bottlenecks.
- High-density, multi-rate port options with MACsec capability: Flexible 10/25G and 100G uplinks provide scalable interconnectivity while protecting data in transit with MACsec security.
- VXLAN and EVPN support for scalable multi-tenant fabrics: Simplify workload mobility, isolation, and policy-driven traffic engineering across large, virtualized data center fabrics.
- Cloud-scale telemetry, security, and programmability: Real-time visibility, proactive fault isolation, and policy-driven automation integrate with Cisco management tools for zero-touch provisioning.
- Compact fixed form factor with streamlined operations: Reduced cabling, simplified cabling, and a footprint optimized for dense data centers and edge deployments without sacrificing performance.
Technical Details of Cisco 93360YC-FX2 Layer 3 Switch
- Model: Cisco Nexus 9300-FX2 Series, 93360YC-FX2 (Fixed Layer 3 switch).
- Form factor: Fixed, rack-mountable chassis designed for data center and enterprise environments.
- Ports and throughput: High-density Ethernet port options with multi-rate support, delivering scalable, line-rate performance for diverse workloads.
- Layer 3 features: Advanced routing capabilities including static routes, VRF, OSPF, and BGP with policy-based routing and route maps.
- Fabric and fabrics: VXLAN and EVPN support to enable scalable multi-tenant fabrics and seamless workload mobility.
- Security and observability: Comprehensive security features and telemetry capabilities designed to monitor, control, and protect data paths at scale.
- Automation and integration: Programmable with Cisco management and automation tooling to enable zero-touch provisioning and policy-driven operations across large deployments.
how to install Cisco 93360YC-FX2 Layer 3 Switch
Installing the Cisco 93360YC-FX2 is designed to be straightforward for data-center staff and network engineers. Begin by validating the unit’s condition and verifying that the rack, power, and cooling systems meet the demanding requirements of a fixed FX2 switch. Mount the chassis securely in a standard 19-inch rack, using the appropriate mounting brackets and screws. Connect the power supplies to a stable power source and ensure grounding per your facility’s electrical standards. Place the switch in a well-ventilated area with adequate airflow to maintain optimal operating temperatures. Plan the cabling strategy to minimize crossovers and maximize airflow; route multirate cables (10G/25G uplinks and 100G spine connections) in orderly bundles to simplify future maintenance and micro-movements in the fabric.
Initial configuration can be performed through the console or a management network. Connect to the console port using the appropriate serial adapter and terminal software, then boot the device to access the Catalyst-like CLI environment. Configure management access, including a secure admin username and password, and establish a management IP address on the out-of-band or out-of-band management network. If you plan to run cloud-scale telemetry and automation features, ensure that the switch’s firmware aligns with your Cisco tooling ecosystem and that any required licenses are applied. Enable essential Layer 3 routing features (VRF, OSPF, BGP) and configure any static routes or route maps as needed for your topology. For VXLAN/EVPN deployments, configure network overlays, control plane routing, and any required EVPN route targets to enable multi-tenant fabrics and workload mobility. Validate that MACsec is enabled on the desired interfaces to protect east-west traffic, and apply access control lists or policy-based security measures to enforce segmentation and policy enforcement at scale.
Post-install validation should include verifying reachability between core and leaf devices, testing inter-VRF routing, and confirming VXLAN tunnels and EVPN control planes come up correctly. Run basic latency and throughput tests to confirm wire-speed performance and check telemetry streams to ensure real-time visibility. If you are using Cisco automation, you may perform zero-touch provisioning to simplify future configurations and accelerate deployments across multi-device ecosystems. Finally, document all configurations, cabling schemes, port mappings, and firmware versions to support ongoing maintenance and upgrades.
Frequently asked questions
- What is the Cisco 93360YC-FX2 Layer 3 Switch? It is a fixed-form-factor Layer 3 switch in the Cisco Nexus 9300-FX2 family designed for data centers and enterprise networks, offering high-density ports, wire-speed routing, VXLAN/EVPN support, and cloud-scale telemetry. This unit is provided as remanufactured hardware that has been tested and verified for performance and reliability.
- Is the device MACsec capable? Yes. The product title notes MACsec capability, enabling encrypted data paths on supported interfaces for secure data transmission.
- What kinds of uplink and port options does it support? The switch supports high-density Ethernet options with multi-rate support, including 10G, 25G, and 100G configurations, designed for scalable spine-leaf or multi-tier data-center architectures.
- What deployments is it suitable for? It is well-suited for data centers, campus distributions, and service provider edge deployments that require deterministic performance, scalable policy enforcement, and multi-tenant fabrics via VXLAN/EVPN.
- Does it include built-in telemetry and automation features? Yes. The FX2 family emphasizes cloud-scale telemetry and programmability, enabling real-time visibility, proactive fault isolation, and automation-friendly operations within Cisco’s ecosystem.
- What should I know about it being remanufactured? Remanufactured devices have been tested and certified to meet performance and reliability standards. They typically include warranty options and come with documentation and support aligned to enterprise expectations.
- How do I install or provision it? Plan to mount the unit in a suitable rack, connect power and management interfaces, configure Layer 3 routing (VRF, OSPF, BGP), enable VXLAN/EVPN as needed, and integrate with Cisco automation tools to enable zero-touch provisioning and ongoing policy management.
Customer reviews
Showing - Of Reviews
