Cisco Catalyst 9200 24-Port PoE+ Switch. Network Essentials

Engineered for reliable performance at the network edge, the Cisco Catalyst 9200 24-Port PoE+ Switch in Network Essentials delivers secure, scalable, and energy-efficient connectivity for growing organizations. This fixed-configuration switch combines enterprise-grade PoE+ capability with robust hardware, flexible routing options, and Cisco’s trusted reliability. With 4 GB of RAM and 4 GB of flash memory, it supports essential network services, enhances policy enforcement at the access layer, and provides a solid foundation for future growth while maintaining simple management and dependable uptime.

• Enterprise-grade performance at the access layer — A 24-port Gigabit Ethernet platform delivers dependable, low-latency connectivity for workstations, IP phones, wireless APs, cameras, and other edge devices. Built to handle busy office environments, the Catalyst 9200 series combines speed with stability to keep your network responsive as you scale.
• Power over Ethernet (PoE+) flexibility — This model integrates PoE+ capability to simplify device deployment by supplying power directly through data ports. Ideal for IP phones, surveillance cameras, and wireless access points, PoE+ minimizes the need for separate power infrastructure and reduces clutter while enabling centralized power management.
• Robust routing options for dynamic networks — With support for key routing protocols—RIP, OSPF, and IS-IS—the switch enables efficient routing within your enterprise network. This flexibility helps you optimize path selection, segment traffic, and maintain reliable inter-VLAN routing as your topology evolves.
• Ample memory and reliable storage — Equipped with 4 GB RAM and 4 GB of flash memory, the Catalyst 9200 provides headroom for feature-rich configurations, policy enforcement, firmware updates, and future feature rollout without sacrificing performance.
• Warranty, security, and trusted Cisco quality — The device is backed by an Enhanced Limited Lifetime Warranty, giving you long-term protection and confidence. Built with Cisco's security-ready design, it supports secure access, policy controls, and resilient operation to help safeguard your network from evolving threats.

Technical Details of Cisco Catalyst 9200 24-Port PoE+ Switch

• Model: Cisco Catalyst 9200-24P-E (c9200-24p-e)
• Ports: 24 x 10/100/1000 Gigabit Ethernet ports with PoE+ support
• PoE+: Yes — PoE+ capable to power compatible devices directly from the switch
• RAM: 4 GB
• Flash memory: 4 GB
• Routing protocols: RIP, OSPF, IS-IS
• Power supply: Included
• Warranty: Enhanced Limited Lifetime Warranty

How to install Cisco Catalyst 9200 24-Port PoE+ Switch

• Plan your deployment by mapping port usage, PoE needs, and uplink connections. Identify a suitable rack location with proper ventilation and enough space for cable management. Ensure you have access to a reliable power source and a management workstation for initial setup.
• Physically install the switch in a standard 19-inch rack, securing it with mounting hardware as needed. Connect the provided power supply to a grounded outlet and verify that the device powers on cleanly. Confirm LED indicators show normal operation after boot.
• Connect your uplink and access devices. Attach the uplink to your core or distribution layer using either copper or fiber modules as required. Plug your PoE devices (phones, cameras, APs) into the remaining Gigabit Ethernet ports to begin provisioning power and connectivity.
• Perform initial configuration via the console or secure management interface. Assign a management IP address, enable basic device security, configure VLANs to segment traffic, and set PoE budgets if your environment requires precise power control. If you use Cisco DNA Center or another management system, prepare the device for zero-touch provisioning where applicable.
• Validate operation and tune performance. Confirm connectivity between devices and the core, verify PoE delivery to powered devices, and monitor port status and link activity. Save the configuration to the flash memory so that the settings persist through reboots and power cycles.

Frequently asked questions

• Q: What is the Cisco Catalyst 9200 24-Port PoE+ Switch designed for?

  A: It is designed for enterprise access-layer deployments, delivering reliable Gigabit connectivity, PoE+ support for powered devices, and flexible routing capabilities to accommodate growing networks.

• Q: How many ports does this switch have and what type are they?

  A: The model C9200-24P-E provides 24 x 10/100/1000 Gigabit Ethernet ports with PoE+ capability for powering connected devices.

• Q: Does the switch come with a power supply?

  A: Yes, a power supply is included to enable immediate deployment in most standard environments.

• Q: What memory and storage come with the switch?

  A: It includes 4 GB of RAM and 4 GB of flash memory, providing ample capacity for operating system features, configurations, and future updates.

• Q: Which routing protocols does it support?

  A: The switch supports RIP, OSPF, and IS-IS, allowing you to implement dynamic routing within your network topology and integrate with existing routing configurations.

• Q: What warranty is provided?

  A: The device is backed by Cisco’s Enhanced Limited Lifetime Warranty, offering long-term protection and assurance for business-critical deployments.