Description
Cisco Catalyst 9300 SFP Module
Elevate your network infrastructure with the Cisco Catalyst 9300 SFP Module, a high-performance fiber transceiver engineered for data networking and optical networks. Designed to slot into Cisco Catalyst 9300 switches, this multi-rate SFP module delivers flexible 25GBase-X connectivity while maintaining backward compatibility with 10GBase-X and 1000Base-X environments. Whether upgrading uplinks, expanding bandwidth for virtualization, or enabling new campus and data-center deployments, this module is built to maximize throughput, reduce latency, and simplify fiber optic deployments across enterprise networks.
With a focus on reliability and ease of use, the Cisco Catalyst 9300 SFP Module combines Cisco’s proven engineering with robust optical performance. It supports 25GBASE-X technology to unlock higher data rates for bandwidth-intensive applications, while preserving compatibility with legacy 10G and 1G networks to protect prior investments and ensure a smooth migration path. The compact, hot-swappable form factor is tailored for dense environments, allowing IT teams to perform upgrades with minimal downtime and without replacing entire chassis or switching infrastructure. This makes it an ideal choice for data centers, enterprise campuses, and remote branch deployments that demand fast, dependable fiber connectivity.
Beyond raw speed, the module is designed to help network teams simplify administration and maintenance. It integrates with Cisco’s management ecosystem, enabling straightforward monitoring, diagnostics, and firmware alignment with Catalyst 9300 devices. The SFP transceiver supports standard optical fiber interfaces, reducing the complexity of fiber cabling while delivering scalable performance for today’s multi-tenant environments and tomorrow’s converged workloads. In short, the Catalyst 9300 SFP Module provides a future-ready, multi-rate solution that aligns with Cisco’s reliability, longevity, and support commitments.
- Multi-rate flexibility: Enables 25GBASE-X connectivity while remaining compatible with 10GBASE-X and 1000BASE-X networks, supporting gradual upgrade paths and mixed-environment deployments.
- Optimized for Cisco Catalyst 9300: Specifically designed to integrate with Catalyst 9300 switches for seamless operation, management, and guaranteed compatibility.
- High-density uplinks for data-intensive workloads: Ideal for virtualization, storage, and analytics workloads that require consistent, high-throughput fiber transceivers.
- Backward compatibility and investment protection: Protects existing investments by supporting legacy fiber networks alongside modern 25G deployments.
- Ease of installation and maintenance: Designed for hot-swappable installation in compatible Cisco environments with standard LC connectors for fiber cabling.
Technical Details of Cisco Catalyst 9300 SFP Module
- Product type: SFP Optical Transceiver
- Supported data rates: 25GBASE-X, 10GBASE-X, 1000BASE-X
- Fiber type: Optical fiber (dual-rate compatibility with standard SFP LC interfaces)
- Form factor: SFP transceiver module compatible with Cisco Catalyst 9300 switches
- Connector type: LC duplex
- Operating environment: Enterprise-grade operating conditions suitable for data centers and campus networks
- Power consumption: Efficient design aligned with typical Cisco transceiver standards
How to install Cisco Catalyst 9300 SFP Module
Follow these steps to install the Cisco Catalyst 9300 SFP Module quickly and correctly:
1. Verify compatibility with your Cisco Catalyst 9300 model and confirm that you have an available SFP slot. Review your device’s hardware compatibility list and ensure the switch is running a compatible IOS XE version for the transceiver.
2. Power down the switch or prepare for a hot-swappable installation if your hardware supports hot-swap in the designated slot. If you are unsure, consult your network administrator or Cisco documentation for guidance on hot-swappable procedures.
3. Remove the protective dust cap from the SFP module and inspect the fiber port for any debris or damage. Keep a clean working environment and use approved fiber cleaning tools as needed.
4. Align the SFP module with the slot, ensuring the connector pins are properly oriented. Gently insert the module until it seats firmly with a click, indicating a solid connection.
5. Connect the fiber optic cable to the LC duplex connectors on the SFP module. Ensure that you are using the correct fiber type (single-mode or multi-mode) and the appropriate QoS and traffic engineering settings for your network design.
6. Power up the switch (or resume operation if performing a hot-swap) and access the switch management interface. Verify that the SFP module is detected and that link status indicators show an active connection. Use Cisco management tools to confirm negotiated speed and duplex settings align with your expectations (25G, 10G, or 1G as configured).
7. Configure the interface in your Cisco IOS XE environment, setting the appropriate speed, trunking or access mode, and any required VLAN tagging or routing policies. Validate end-to-end connectivity by performing basic pings or traffic tests across the uplink.
8. Document the upgrade in your network change records and monitor performance over the next operational cycles to ensure stable behavior under typical workloads. If you encounter issues, consult Cisco support resources or your partner for troubleshooting tips tailored to Catalyst 9300 configurations.
Frequently asked questions
- Q: What is the Cisco Catalyst 9300 SFP Module used for? A: It is a high-speed fiber transceiver that provides flexible, multi-rate connectivity for Cisco Catalyst 9300 switches, enabling 25GBASE-X performance while remaining compatible with 10GBASE-X and 1000BASE-X networks for seamless migrations.
- Q: Which fiber types and distances does it support? A: The module uses standard optical fiber with LC duplex connectors and supports multiple rates (25G, 10G, 1G). The exact distance support depends on fiber type (single-mode or multi-mode) and the specific network design; please consult Cisco specifications for your deployment scenario.
- Q: Is the module hot-swappable? A: Yes, the module is designed for hot-swappable operation in compatible Cisco Catalyst 9300 environments, enabling upgrades with minimal downtime when performed according to proper procedures.
- Q: How do I verify compatibility and manage the module? A: Confirm compatibility with your Catalyst 9300 model via Cisco documentation, and use Cisco IOS XE management tools to monitor link status, speed negotiation, and fiber health. Regular firmware updates may be recommended to maintain optimal performance and security.
- Q: What are common use cases for this SFP module? A: Common use cases include upgrading uplinks to 25G for data-intensive workloads, enabling migration from 1G/10G networks to higher capacities, supporting virtualization and storage traffic, and expanding campus or data-center connectivity with minimal hardware changes.
Customer reviews
Showing - Of Reviews