Cisco Compatible DWDM-SFP10G-35.04 - Functionally Identical 10GBASE-DWDM SFP+ 1535.04nm 80km DOM Duplex LC Single-mode Connector

ENETSKU: 4123544

Price:
Sale price$2,001.98

Description

Cisco Compatible DWDM-SFP10G-35.04 - Functionally Identical 10GBASE-DWDM SFP+ 1535.04nm 80km DOM Duplex LC Single-mode Connector

ENET delivers a comprehensive lineup of OEM-compatible transceivers, offering Cisco-compatible DWDM SFP+ modules that pair enterprise-grade reliability with substantial cost savings. The Cisco Compatible DWDM-SFP10G-35.04 is designed to be a drop-in, functionally identical replacement for 10GBASE-DWDM SFP+ modules, engineered to operate seamlessly in modern data centers, campus networks, and service provider cores. With a wavelength of 1535.04 nm and support for distances up to 80 km on single-mode fiber, this transceiver enables dense wavelength division multiplexing (DWDM) at the optic layer, helping you scale bandwidth without a costly equipment refresh. It ships with Digital Optical Monitoring (DOM) to give IT teams real-time visibility into link health, making proactive maintenance practical and straightforward. ENET’s commitment to compatibility means you can deploy with confidence across Cisco environments and other major network platforms, enjoying robust performance, interoperability, and a price point that reduces total cost of ownership.

  • High‑performance DWDM transmission at 1535.04 nm enables long‑haul 10G links over single‑mode fiber, with DWDM capability that optimizes spectrum use and increases capacity in core, distribution, and data center networks. Designed for reliable operation in contemporary DWDM architectures with wide compatibility.
  • Cisco‑compatible 10GBASE‑DWDM SFP+ replacement that plugs into standard SFP+ ports and acts as a drop‑in upgrade for Cisco switches, routers, and other equipment, eliminating the need for specialized drivers or complex configurations while preserving feature parity.
  • DOM for real‑time telemetry Digital Optical Monitoring provides ongoing insight into TX/RX power, temperature, and other critical optical parameters, enabling rapid diagnostics, accurate link budgeting, and proactive maintenance decisions.
  • Durable, industry‑standard design built to the MSA‑compliant SFP+ form factor with a duplex LC connector, this module is engineered for reliable operation in data centers, campuses, and enterprise networks where space, power, and performance must align.
  • Cost‑effective, OEM‑compatible solution ENET's OEM‑compatible transceivers are engineered to deliver reliable interoperability at a fraction of the price of original equipment manufacturer modules, helping you scale networks affordably without sacrificing performance or compatibility.

Technical Details of Cisco Compatible DWDM-SFP10G-35.04

  • Standard: 10GBASE-DWDM SFP+
  • Wavelength: 1535.04 nm
  • Distance (reach): Up to 80 km on single‑mode fiber
  • Connector: Duplex LC
  • Fiber Type: Single‑mode
  • DOM: Yes (Digital Optical Monitoring)
  • Form Factor: SFP+ transceiver
  • Compatibility: Cisco and other enterprise equipment supporting 10GBASE-DWDM SFP+
  • Manufacturer/Line: ENET OEM‑compatible transceivers

How to Install Cisco Compatible DWDM-SFP10G-35.04

Installing this transceiver is a standard, hot‑swappable process for SFP+ ports. To ensure optimal performance and reliability, follow these steps:

1) Power down or gracefully shut down the device port if your network gear supports non‑disruptive operation.
2) Insert the DWDM‑SFP+ module into an available SFP+ slot until it seats firmly and you hear or feel a click, indicating it is secured.
3) Connect the fiber using a Duplex LC patch cord to the DWDM network element or switch port, ensuring the transmitter and receiver are linked in the correct path for your topology.
4) Power up the device (if you powered down) and verify link status on the management interface. Look for an active LED indicator on the SFP+ module and a corresponding port status in your switch or router software.
5) Use the DOM readouts or the network management system to verify wavelength alignment, power levels, and temperature. Confirm the link remains within expected parameters and perform a basic throughput test to validate performance.

Frequently asked questions

  • Q: Is this module truly Cisco compatible? A: Yes. The Cisco Compatible DWDM-SFP10G-35.04 is designed to function as a drop‑in replacement in Cisco networks and other environments that support standard 10GBASE-DWDM SFP+ modules, providing seamless interoperability without driver changes.
  • Q: What fiber and distance does it support? A: It is designed for single‑mode fiber and supports DWDM links up to approximately 80 km, depending on network design, fiber quality, and amplification conditions.
  • Q: Does it include DOM? A: Yes. Digital Optical Monitoring (DOM) is included to give visibility into TX power, RX power, temperature, and other performance metrics.
  • Q: Can I mix OEM and ENET OEM‑compatible transceivers in the same chassis? A: In many cases, mixed deployments are supported due to standard SFP+ interfaces and vendor interoperability; however, always consult your network equipment vendor’s interoperability guidelines to confirm compatibility in your specific environment.
  • Q: What warranty and support come with this transceiver? A: Warranty terms vary by seller and region, but ENET‑based OEM‑compatible transceivers are typically accompanied by a robust warranty and compatibility guarantees. Check the product listing for the exact terms offered by the seller.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed