Cisco Compatible ONS-XC-10G-SR-MM – TAA Compliant 10GBase-SR XFP Transceiver

Experience enterprise-grade performance with ENET’s Cisco compatible transceiver, engineered to deliver reliable 10GBASE-SR connectivity for OC-192/STM-64 systems on multimode fiber. This functionally identical ONS XFP 10GBase-SR module is designed to be a seamless, cost-effective alternative to OEM hardware while maintaining the same electrical, optical, and compatibility standards. Ideal for data centers, campus networks, and carrier-class backbones, this transceiver offers the perfect blend of performance, compliance, and value without sacrificing reliability or compatibility with Cisco ONS-XC platforms.

• High-performance 10GBASE-SR optics: Supports 10 Gbps data rates over short-range multimode fiber with an 850 nm wavelength, enabling high-density uplinks and rapid data transfer across Cisco ONS-XC networks.
• TAA compliant and OEM-compatible: Fully aligned with Trade Agreements Act (TAA) requirements and functionally identical to Cisco ONS XFP modules, delivering a seamless plug-and-play experience while preserving full interoperability.
• Long-standing compatibility with OC-192/STM-64 backbones: Optimized for legacy and modern multiplexing environments, allowing smooth integration into existing network architectures without costly reconfiguration.
• Cost-effective OEM alternative with guaranteed compatibility: ENET’s OEM-compatible transceivers deliver a fraction of the price of brand-name optics while preserving quality, performance, and a guaranteed fit with Cisco equipment.
• Compact XFP form factor and multimode reliability: The XFP footprint ensures compatibility with standard 10G uplink ports, backed by robust construction suitable for data centers, telecom edges, and campus networks requiring dependable multimode connections.

Technical Details of Cisco Compatible ONS-XC-10G-SR-MM

• Optical wavelength: 850 nm (short-range multimode) for 10GBASE-SR operation.
• Data rate: 10 Gbps (10GBASE-SR) suitable for OC-192/STM-64 backbones and high-speed uplinks.
• Fiber type and distance: Multimode fiber, up to 300 meters with appropriate MMF grades (OM2/OM3 commonly supported per network design).
• Transceiver form factor: XFP-compatible module designed to plug into standard 10GBASE-SR ports on Cisco ONS-XC hardware.
• Connector type: LC simplex connector typical of 10GBASE-SR transceivers, enabling straightforward fiber termination and deployment.
• Compatibility: Functionally identical to Cisco ONS-XC-10G-SR-MM in performance, allowing easy replacement and spare strategy for mixed-brand environments.
• Compliance: TAA compliant to meet procurement and regulatory requirements for government and enterprise deployments.
• Warranty and support: Backed by ENET’s compatibility guarantee and support network, providing assurance for interoperability with Cisco equipment.

How to install Cisco Compatible ONS-XC-10G-SR-MM

Installing this transceiver is a straightforward process that mirrors standard plug-and-play installation for 10GBASE-SR optics. Follow these steps to ensure a clean, reliable uplink that maintains your network’s performance and stability:

1. Power down the device: Before removing or inserting any module, power down the Cisco ONS-XC chassis or ensure the port is in a safe maintenance state to prevent static discharge or interface disruptions.
2. Inspect and prepare: Check the transceiver for any packaging damage and confirm the labeling (model and part number) matches the intended port and slot. Inspect the LC fiber connectors for cleanliness and integrity.
3. Insert the transceiver: Align the XFP module with the port, slide it gently into the slot until it seats firmly, and ensure the locking mechanism is engaged. Do not force the module if it does not seat smoothly.
4. Connect fiber: Attach the multimode fiber to the LC connector, using proper fiber polishing and ferrule alignment. Ensure the link is connected to the corresponding transmitter or receiver on the opposite end, respecting polarity if applicable.
5. Power up and verify: Restore power to the device and monitor the port status. Use the system CLI or web interface to verify link status, negotiated speed, and error statistics. Run a short loopback or traffic test if available to confirm data integrity.

Frequently asked questions

• Is this Cisco-compatible and suitable for ONS-XC deployments? Yes. The ONS-XC-10G-SR-MM is designed to be functionally identical to the Cisco ONS XFP 10GBase-SR module, offering seamless operation with Cisco ONS-XC platforms while delivering cost savings through OEM compatibility.
• What networks can benefit most from this transceiver? Enterprise data centers, campus networks, and telecom backbones that rely on 10 Gigabit Ethernet over multimode fiber and OC-192/STM-64 transport paths can leverage this module for uplinks, server-to-switch links, and storage networking.
• Does the transceiver require any special configuration? In most cases, no special configuration is required beyond standard port settings in your Cisco ONS-XC device. It operates as a standard 10GBASE-SR XFP transceiver, with auto-negotiation and compatibility features supported by the chassis.
• What about warranty and support? ENET provides a compatibility guarantee for OEM-equivalent modules, along with standard support channels. For warranty details, refer to ENET’s policy at purchase and enroll in any applicable service plans.
• How far can I run multimode fiber with this transceiver? The typical range for 850 nm 10GBASE-SR on multimode fiber is up to 300 meters, depending on fiber grade and connector quality. Ensure you use appropriate MMF (OM2/OM3) and proper channel design to achieve the desired distance.