Cisco DC P4501 500 GB NVMe U.2 Enterprise Solid State Drive

The Cisco DC P4501 500 GB Solid State Drive is engineered to transform how data is stored, accessed, and managed in the most demanding enterprise environments. Built for data centers, server farms, and mission-critical applications, this 2.5-inch internal SSD leverages the power of NVMe over the U.2 (SFF-8639) interface to deliver unprecedented levels of performance, consistency, and reliability. Designed to meet the intense I/O demands of virtualization, databases, analytics, and cloud-native workloads, the Cisco P4501 is a foundational component for modern infrastructure that requires fast boot, rapid data access, and sustained throughput under heavy workloads. With Cisco’s enterprise-grade engineering, you get a storage solution that not only accelerates your apps but also simplifies integration with Cisco UCS and a wide range of data center hardware. In short, the Cisco DC P4501 is purpose-built to shorten latency, increase IOPS, and reduce data center bottlenecks while maintaining the durability and reliability critical to 24/7 operations.

• Blazing NVMe performance for data center workloads — optimized for high-throughput, low-latency access to hot data, enabling faster databases, real-time analytics, and responsive virtualized environments.
• 500 GB capacity — ideal for operating system, boot drives, caching layers, or hot data tiers in dense server configurations, delivering ample room for operating systems, applications, and frequently accessed datasets.
• 2.5-inch internal form factor with U.2 (SFF-8639) interface — designed for easy integration into standard enterprise servers and storage arrays that support U.2 hot-plug bays and PCIe NVMe connectivity.
• Enterprise-grade reliability and durability — built to endure continuous operation, with robust wear leveling, error correction, and power-loss protection features suitable for data centers and mission-critical workloads.
• Seamless compatibility with Cisco ecosystems — engineered to work with Cisco data center solutions, servers, and storage environments, providing dependable performance in Cisco-powered infrastructure and alongside compatible third-party systems.

Technical Details of Cisco DC P4501 500 GB NVMe U.2 SSD

• Form Factor: 2.5" U.2 (SFF-8639)
• Interface: NVMe over PCIe for low latency and high throughput
• Capacity: 500 GB
• Designed for data center workloads including databases, virtualization, and analytics
• Enterprise-grade reliability suitable for continuous operation in demanding environments

How to install Cisco DC P4501 500 GB NVMe U.2 SSD

Installing the Cisco DC P4501 is straightforward for IT teams familiar with enterprise storage upgrades. Start by powering down the server or storage chassis and following your hardware vendor’s shutdown procedures. Locate an available U.2 (SFF-8639) drive bay in your 2.5-inch form factor storage or server chassis. Remove the drive tray if required, and carefully align the P4501 with the U.2 connector, ensuring the gold-fingered edge and connector are properly seated. Slide the drive into the bay or slot until it is fully seated and secure the tray or screws as per your enclosure’s guidelines. Reconnect any hot-plug or carrier cables if your system uses them. Power up the system and enter the BIOS or system management controller to confirm the drive is detected. In the operating system, initialize the drive, create a partition table, and format the volume as needed. For servers running critical workloads, consider configuring a storage pool or RAID policy if your platform supports it, and apply firmware updates if available to ensure you benefit from the latest performance and reliability enhancements. Finally, monitor drive health and endurance through your storage management tools to maximize uptime and data protection.

Frequently asked questions

• What is the Cisco DC P4501? The Cisco DC P4501 is a 500 GB NVMe PCIe solid-state drive designed for data centers and enterprise workloads, formatted in a 2.5-inch U.2 (SFF-8639) package for easy integration into compatible servers and storage systems.
• What interface does it use? It uses NVMe over the PCIe interface with a 2.5-inch U.2 (SFF-8639) connector, enabling high-speed data access and low latency suitable for demanding workloads.
• What workloads is this drive best suited for? It is optimized for data center applications such as databases (OLTP and OLAP), virtualization, analytics,-intensive caching, and other write- and read-heavy enterprise tasks that require fast, reliable storage.
• Is this drive compatible with Cisco UCS and Cisco infrastructure? Yes, the P4501 is designed to integrate with Cisco data center solutions and is suitable for deployment alongside Cisco servers and storage arrays, as well as compatible third-party systems that support U.2 NVMe drives.
• How should I configure it in a data center environment? Configure the drive for your workload in the OS and, if applicable, in the server’s firmware/BIOS or RAID controller. Use appropriate drive health monitoring and firmware updates to maintain performance and reliability over time.