Cisco SFP+ 10GBASE-SR Optical Transceiver Module

Elevate your network performance with the Cisco SFP+ 10GBASE-SR optical transceiver. This high‑quality plug‑in module is designed for data networking applications that demand fast, reliable, and scalable 10 Gigabit Ethernet connectivity over short‑range multi‑mode fiber. With an 850 nm VCSEL transmitter, this SFP+ transceiver enables efficient data sharing across server racks, storage systems, switches, and routers in data centers and campus networks. Built to work seamlessly with Cisco equipment, the SFP+ SR module delivers plug‑and‑play operation, robust signal integrity, and easy upgrades for growing networks. Whether you’re configuring a cutting‑edge data center spine‑leaf topology or expanding an existing enterprise network, the Cisco SFP+ 10GBASE-SR provides the flexibility you need to meet today’s bandwidth demands while staying prepared for future expansion.

• Performance‑driven 10GBASE‑SR connectivity: This transceiver delivers 10 Gigabit Ethernet over short‑reach multi‑mode fiber, optimizing bandwidth for server‑to‑switch and storage connections within data centers and enterprise networks.
• 850 nm optics for reliable MMF links: The 850 nm wavelength is optimized for multi‑mode fiber, enabling high‑speed links over typical data center fiber runs with excellent optical performance and low latency.
• Plug‑in, hot‑swappable design: Engineered as a standard SFP+ module, it drops into compatible Cisco switches, routers, and other SFP+ ports with minimal downtime—allowing rapid upgrades without major disruptions.
• Compact form factor for dense deployments: The small, modular SFP+ package fits into standard SFP+ slots across a wide range of Cisco equipment, supporting scalable upgrades in densely populated racks and data centers.
• Reliable investment for long‑term growth: Cisco SFP+ transceivers are built for consistent performance in demanding networking environments, offering dependable operation and straightforward compatibility with Cisco ecosystem hardware.

Technical Details of Cisco SFP+

• Transceiver type: SFP+ plug‑in module
• Network standard: 10GBASE‑SR
• Wavelength: 850 nm
• Fiber type: Multi‑Mode Fiber (MMF)
• Connector: LC duplex

How to install Cisco SFP+

Step 1 — Power down or schedule a maintenance window for the network device into which you will install the transceiver. This helps prevent any unforeseen link interruptions during the installation.

Step 2 — Remove the existing SFP+ module (if applicable) with care, or identify an available SFP+ slot on the device. Make sure the device is powered off before removing or inserting components to avoid ESD damage or short circuits.

Step 3 — Align the Cisco SFP+ module with the SFP+ port and firmly insert it until it seats securely. You should hear or feel a gentle click as the module locks into place. Do not force the module; if it does not seat properly, remove and reinsert to ensure proper alignment.

Step 4 — Attach the fiber optic cable to the LC duplex connector on the transceiver, ensuring the correct polarity and a clean, secure connection. Use appropriate MMF fiber (e.g., OM3 or OM4) as recommended for 10GBASE‑SR links, and avoid bending the fiber beyond its minimum bend radius.

Step 5 — Re‑power the device and verify link status through the device’s management interface or console. Confirm that the port negotiates at 10 Gbps and that the link lights indicate an active connection. If a link is not established, reseat the module and check fiber connectivity, cable quality, and compatibility with the switch or router model.

Frequently asked questions

Q: What is Cisco SFP+ 10GBASE‑SR?
A: It is a short‑reach 10 Gigabit Ethernet transceiver designed to operate over multi‑mode fiber with an 850 nm wavelength, fitting into standard SFP+ ports for Cisco equipment and enabling high‑speed connections over relatively short distances.

Q: Can I use this transceiver with non‑Cisco devices?
A: Many SFP+ modules are compatible with a broad range of SFP+ ports that support 10GBASE‑SR. However, some vendors may enforce compatibility checks or restrictions. Always verify with your equipment vendor's guidelines and warranty terms before mixing brands.

Q: What type of fiber should I use with 10GBASE‑SR?
A: Short‑reach 10GBASE‑SR links typically use multi‑mode fiber (MMF), commonly OM3 or OM4, with LC duplex connectors. Ensure the fiber meets the appropriate specifications for your network environment and distance requirements.

Q: Is installation support available from Cisco?
A: Cisco provides documentation and support for using its transceivers with compatible devices. For detailed installation guidance, refer to device manuals and Cisco’s official product resources. If you encounter incompatibilities, contact your network administrator or Cisco support for assistance.

Q: What should I do if the link does not come up after installation?
A: Verify that the transceiver is properly seated, confirm that the fiber is correctly connected and not damaged, check fiber type and distance against the recommended specs for 10GBASE‑SR, and ensure the device port is configured to use 10 Gbps. If issues persist, swap to a known‑good module or test with a different SFP+ port to isolate the fault.