Description
Cisco SFP-10G-T-X Module
The Cisco SFP-10G-T-X Module is engineered to deliver high-performance 10 Gigabit Ethernet over copper, providing flexible, scalable connectivity for data centers, enterprise networks, and campus deployments. Designed to integrate seamlessly with Cisco devices that support SFP+ transceivers, this module enables you to upgrade core and aggregation layers without a complete switch replacement. By leveraging the 10GBASE-T standard and copper RJ-45 cabling, you can extend your network at a lower cost per port while preserving investment in existing copper infrastructure. This SFP+ transceiver combines reliability, ease of installation, and broad compatibility to support demanding workloads such as virtualization, storage networking, and real-time applications, all while maintaining the familiar Cisco management and troubleshooting workflow you rely on daily. Built to withstand real-world conditions in data centers and office environments, the SFP-10G-T-X offers a balance of performance, flexibility, and value that helps organizations scale their networks with confidence.
-
Blazing-fast 10GBASE-T copper connectivity. This module delivers 10 Gigabit Ethernet over twisted-pair copper, enabling high-throughput links with standard RJ-45 cabling. It supports the full duplex operation needed for modern data center and enterprise networks, allowing you to consolidate uplinks and scale bandwidth without replacing fiber infrastructure.
Ideal for connecting servers, top-of-rabric (TOF) storage, virtualization hosts, and high-performance workstations to Cisco switches that offer SFP+ slots. The copper path can simplify cabling, reduce installation costs, and provide a flexible upgrade path where fiber may be impractical.
-
Broad Cisco ecosystem compatibility. Designed to integrate with a wide range of Cisco Catalyst and Nexus platforms that support SFP+ modules, the SFP-10G-T-X leverages Cisco’s proven interoperability and management capabilities. This enables streamlined provisioning, consistent CLI and GUI experiences, and reliable operational visibility across your network stack.
While optimized for Cisco gear, it also adheres to industry standards for 10GBASE-T, enabling compatibility with other devices that accept SFP+ copper transceivers where allowed by vendor policies and firmware levels.
-
Flexible copper cabling for cost-efficient upgrades. With support for standard copper cabling, you can reuse existing Cat6 and Cat6a networks to extend 10G links over longer distances compared with some fiber options. This translates to lower cabling costs, simpler maintenance, and easier staging for migration projects as you scale from 1G to 10G without ripping out your current copper infrastructure.
Typical deployments include data center uplinks, server access networks, storage networks, and campus backbones where copper is already in place. The familiar RJ-45 interface also simplifies cable management and reduces the need for specialized fiber tooling or splicing.
-
Reliability, security, and durable design. The SFP-10G-T-X features robust shielding and a compact, hot-swappable form factor that minimizes downtime during maintenance and upgrades. Cisco’s engineering focuses on long-term reliability, with attention to signal integrity, EMI shielding, and protection features that maintain link stability in challenging environments.
In addition, the module supports essential protections such as ESD safeguards and temperature considerations that help maintain performance in data center racks, wiring cabinets, and crowded network closets.
-
Future-ready performance with easy installation. Upgrading to 10GBASE-T is often a matter of swapping in a single compliant module, allowing you to scale bandwidth on demand without reorganizing your entire network fabric. The SFP-10G-T-X is designed for plug-and-play deployment, enabling quick rollouts of high-speed links while preserving the existing network architecture and IP addressing schemes.
Administration and monitoring align with Cisco management tools, providing consistent visibility into link status, speed negotiation, and diagnostics, which helps reduce mean time to repair (MTTR) and simplifies ongoing operations.
Technical Details of Cisco SFP-10G-T-X Module
Form factor and standard: SFP+ copper transceiver implementing 10GBASE-T over standard twisted-pair cabling.
Data rate: 10 Gbps Ethernet (full-duplex).
Interface: RJ-45 copper connector compatible with 10GBASE-T infrastructure; supports auto-negotiation and auto-MDIX where applicable.
Cable compatibility: Designed for use with Cat6, Cat6a, and compatible copper cabling. Ensures reliable operation over standard copper networks used in data centers, campuses, and enterprise environments.
Distance scalability: Supports copper runs up to standard industry distances (e.g., up to 100 meters on Cat6a, up to 55 meters on Cat6, depending on cabling and installation). Actual reach depends on cable category and network topology.
Power and thermal: Engineered for efficient power usage within typical SFP+ power envelopes; designed to operate within Cisco platform thermal environments. Exact power consumption varies by device and configuration.
Operating and compliance: Complies with IEEE 802.3an 10GBASE-T specifications and related SFP+ interoperability requirements to ensure reliable operation within Cisco ecosystems and standards-compliant networks.
Durability and protection: Built with a robust housing and protective features to endure routine hot-swapping and rack-mounted deployments while preserving signal integrity.
Compatibility notice: While optimized for Cisco platforms, the module adheres to standard SFP+ form factors and 10GBASE-T signaling, which may allow cross-vendor usage where supported by device firmware and licensing. Always verify compatibility with your specific hardware and software version.
How to install Cisco SFP-10G-T-X Module
Prepare the equipment: Ensure your Cisco device supports SFP+ slots and 10GBASE-T modules. Verify that the device is powered and within maintenance windows if required by your operations policy.
Power and safety checks: If your equipment supports hot-swapping, you may insert the module without powering down. If not, power down the device following the manufacturer’s guidance before installation.
Insert the module: Align the SFP-10G-T-X module with the SFP+ slot and gently insert until you hear or feel a click, indicating secure engagement with the connector. Ensure the latching mechanism is fully closed to secure the module.
Connect the copper cable: Attach a quality Cat6/Cat6a RJ-45 copper patch cable to the module’s RJ-45 interface. Route the cable to the corresponding device port with minimal tension to prevent strain on the connector.
Enable and verify: Power on the device (if required) and verify link status via LED indicators, the device’s CLI, or management interface. Set the interface speed to 10G if automatic negotiation does not establish a link, and confirm duplex and flow control settings align with your network policy.
Monitor performance: Use standard monitoring tools to confirm 10G link integrity, latency, and throughput. Review error counters and adjust cabling or switch port settings as needed to optimize performance.
Frequently asked questions
-
Q: What is the Cisco SFP-10G-T-X Module?
A: It is a 10 Gigabit Ethernet SFP+ transceiver that uses 10GBASE-T over copper RJ-45 cabling, designed to upgrade Cisco networks to 10G speed while leveraging existing copper infrastructure.
-
Q: Which devices support this module?
A: It is designed for Cisco devices with SFP+ slots, such as many Catalyst and Nexus platforms. Compatibility is best confirmed with your device’s hardware compatibility matrix and firmware version; the module adheres to standard SFP+ form factors and 10GBASE-T signaling for broad interoperability when allowed by vendor policies.
-
Q: Can I use non-Cisco switches with this module?
A: The module follows industry standards for SFP+ 10GBASE-T, which may permit use in non-Cisco equipment that supports 10GBASE-T SFP+ modules. Always verify cross-vendor compatibility with your hardware and firmware documentation to avoid function or warranty issues.
-
Q: What copper cabling is recommended?
A: For best results, use certified Cat6a or Cat6 cabling with appropriate shielding and proper terminations. Cat6a generally supports higher frequencies and longer distances, aligning with 10GBASE-T performance goals.
-
Q: Is the module hot-swappable?
A: Yes. The SFP-10G-T-X is designed as a hot-swappable transceiver, allowing removal and replacement without powering down the entire device in most Cisco-managed environments. Always follow your equipment’s hot-swapping guidelines and safety procedures.
-
Q: What kind of warranty is available?
A: Cisco transceiver modules typically carry a manufacturer warranty through the vendor or reseller. Check the specific warranty terms at the time of purchase for coverage details and duration applicable to your region and purchase channel.
Customer reviews
Showing - Of Reviews