Cisco SPA Interface Processor 700

CiscoSKU: 10255488

Price:
Sale price$69,645.06

Description

Cisco SPA Interface Processor 700

The Cisco SPA Interface Processor 700 is a high-performance, scalable interface processor designed for the Cisco ASR 9000 Series. It extends the remarkable scale and flexibility of Cisco’s flagship edge router, enabling operators to push the boundaries of Layer 2 and Layer 3 scalability with carrier-class reliability. Built for service providers and large enterprises alike, the SPA Interface Processor 700 delivers the density, performance, and resilience needed to support growing traffic demands, complex service chains, and demanding uptime requirements in metropolitan, regional, and backbone networks.

  • Unmatched scalability for Layer 2 and Layer 3 networks: The SPA Interface Processor 700 enables expansive service provision with flexible interface options and high-density port support, empowering operators to scale routing, switching, and service delivery without compromising performance or reliability.
  • Carrier-class reliability and operational efficiency: Engineered for fault tolerance and continuous operation, this processor supports redundant architectures, hot-swappable components, and robust failover mechanisms that minimize downtime and service impact in mission-critical networks.
  • Flexible deployment within the Cisco ASR 9000 ecosystem: The SPA 700 integrates seamlessly with the Cisco ASR 9000 Series, offering a modular, future-ready upgrade path that preserves investment while enabling new capabilities as network requirements evolve.
  • Advanced service features for service providers: With support for essential networking features such as QoS, MPLS, VPNs, and advanced routing protocols, the SPA Interface Processor 700 helps deliver differentiated services, secure connectivity, and precise traffic engineering at scale.
  • Simplified management and lifecycle support: Comprehensive management, telemetry, and automation capabilities enable operators to monitor, diagnose, and optimize performance across vast networks, reducing operations costs and accelerating service delivery.

Technical Details of Cisco SPA Interface Processor 700

  • Get this information from the "specifications" section of the product from https://ec.synnex.com/ using product "UPC" or "SKU" as reference

How to install Cisco SPA Interface Processor 700

Installing the Cisco SPA Interface Processor 700 within an ASR 9000 chassis begins with careful planning and compatibility checks. Start by verifying that the ASR 9000 platform and the SIP slot in your chassis support the SPA 700 module. Review Cisco’s compatibility matrices and ensure your enclosure has the appropriate power and cooling resources to accommodate the new processor. Once you confirm compatibility, schedule a maintenance window to minimize impact on live services.

Power down the system or ensure it is in a safe state for hardware changes, following your organization’s change management procedures. Use ESD-safe practices when handling the SPA interface processor module. Remove the existing spare or empty SIP slot cover, if applicable, and align the SPA 700 module with the slot connector. Insert the module firmly but gently until it seats securely in the backplane, then secure any retention screws as required by your chassis guidelines.

Reconnect any required interface cables or backplane connections to the new SIP, ensuring correct routing to the appropriate network segments and service chains. Once the module is physically installed, apply power and boot the system. Access your Cisco IOS XR management interface to verify that the SPA 700 is recognized by the chassis, check for proper slot occupancy, and confirm health status indicators such as system LEDs or backplane signals.

Configure the SPA Interface Processor 700 using standard Cisco IOS XR commands. Begin with basic provisioning to bind the SIP to the correct routing and service policy contexts, then progressively enable intended features such as QoS policies, MPLS label switching, VPN tunnels, and any required traffic engineering settings. Validate configurations by monitoring real-time statistics and behavioral tests across representative traffic patterns. If you are upgrading from a previous generation, apply any required firmware or feature-set updates according to Cisco’s upgrade procedures and ensure compatibility with your existing routing protocols and service policies.

After installation and initial configuration, perform end-to-end validation. Confirm that the new processor properly participates in routing and switching domains, that failover mechanisms engage correctly in the event of a simulated fault, and that traffic flows through the designed service paths as intended. Document the configuration, performance baselines, and any observed anomalies to support ongoing maintenance and optimization efforts. Finally, update your asset and inventory records to reflect the new hardware and keep firmware updates aligned with Cisco release recommendations to maximize security and reliability.

Frequently asked questions

  • Q: What is the Cisco SPA Interface Processor 700? A: The SPA Interface Processor 700 is a high-capacity interface processor module designed for the Cisco ASR 9000 Series, delivering scalable Layer 2 and Layer 3 capabilities, robust reliability, and integration with Cisco’s edge routing ecosystem to support large-scale service provider networks.
  • Q: Which networks benefit most from the SPA Interface Processor 700? A: Service providers and large enterprises seeking scalable, resilient edge routing and aggregation for metro, regional, and backbone networks benefit most, especially when delivering high-demand services, VPNs, MPLS, and advanced routing features at scale.
  • Q: Can the SPA Interface Processor 700 be swapped without taking down the entire system? A: Cisco designs the SPA 700 for integration with carrier-grade redundancy; in many deployments, hot-swapping and redundant architectures are supported to minimize downtime, though always follow your maintenance window practices and vendor guidelines during any hardware change.
  • Q: How do I verify that the SPA Interface Processor 700 is functioning correctly after installation? A: Use the Cisco IOS XR management tools to check slot recognition, hardware health, and interface status. Run diagnostics, monitor real-time statistics, and perform traffic tests across representative paths to confirm operational readiness.
  • Q: Where can I find official installation and upgrade guidance for the SPA Interface Processor 700? A: Refer to Cisco's official documentation and the specifications page on the supplier site (for example, the Synnex specifications reference) to ensure you follow the correct hardware installation, firmware upgrade, and feature configuration procedures.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed