Cisco WAN Interface Card (VIC) — 2 x RJ-45 10/100/1000BASE-T

The Cisco WAN Interface Card (VIC) is a modular and scalable solution designed for Cisco routers that support VIC modules. This two-port copper Ethernet VIC expands WAN connectivity with 2 x RJ-45 10/100/1000BASE-T ports, delivering flexible, high-performance WAN access over standard twisted-pair cabling. Built for reliability in enterprise environments, the VIC enables organizations to enhance branch office connectivity, enable redundant WAN paths, and optimize bandwidth while preserving current network investments. With seamless Cisco IOS integration and familiar management, this VIC provides a smooth upgrade path for growing networks that demand greater WAN throughput and robust, adaptable connectivity across multiple sites.

• Two-port copper WAN expansion: The VIC offers 2 x RJ-45 10/100/1000BASE-T ports, giving you the ability to deploy two separate WAN links or combine them for increased bandwidth. This dual-port design is ideal for site-to-site connectivity, backup links, or dedicated cloud access, providing greater flexibility for dynamic network topologies. The copper Ethernet interface leverages your existing twisted-pair cabling, reducing the need for new cabling while delivering dependable performance.
• Gigabit Ethernet performance with auto-negotiation: Each port supports 10/100/1000 Mbps operation with automatic speed and duplex negotiation. This ensures optimal performance with connected devices and simplifies deployment, as the VIC automatically matches the capabilities of upstream devices. The result is consistent, high-speed WAN data transfer suitable for bandwidth-intensive applications, video conferencing, and real-time data replication across locations.
• Seamless Cisco integration and management: Designed for Cisco routers that support VIC modules, this card integrates with Cisco IOS and router hardware without requiring major changes to your network stack. It benefits from Cisco’s proven reliability, standardized configurations, and familiar management workflows, including monitoring, logging, and diagnostics. This coherence reduces administrative overhead while improving visibility into WAN link status, utilization, and health across your network.
• Scalable, future-proof WAN expansion: Adding a VIC is a low-disruption upgrade that extends your router’s WAN capabilities as your organization grows. The two-port design provides a solid foundation for scaling WAN connectivity, supporting additional backup paths or new remote sites without purchasing an entirely new router or platform. This scalable approach helps protect your initial network investment while enabling gradual expansion to meet evolving bandwidth and redundancy requirements.
• Reliability, interoperability, and cost efficiency: Built to Cisco standards, the VIC emphasizes reliability and interoperability across a wide range of Cisco platforms. Using standard RJ-45 copper cabling, the card aligns with common data-center and branch-office networking practices, streamlining maintenance and reducing total cost of ownership. Its compact form factor and plug-in design minimize downtime during installation or upgrades while maintaining high availability for critical WAN workloads.

Technical Details of Cisco WAN Interface Card (VIC)

• Ports: 2 x RJ-45 10/100/1000BASE-T
• Data rate: Up to 1 Gbps per port (full duplex) on copper Ethernet
• Cabling: Copper twisted pair; supports auto-negotiation and speed/duplex negotiation
• Form factor: VIC module designed for Cisco routers that support VIC interfaces
• Compatibility: Requires a Cisco device with a VIC slot and IOS support; verify model compatibility in Cisco documentation

How to install Cisco VIC

• Power down the router and unplug it from power to prevent electrical damage during installation.
• Open the chassis or access panel according to the device’s maintenance guidelines to expose available VIC slots.
• Insert the VIC into an appropriate VIC slot until it seats firmly and the release latch engages securely.
• Reconnect any cables or ancillary components, ensuring ports align with the intended WAN connections.
• Power the device back on and verify detection in the router’s hardware inventory and IOS, then configure the interfaces as needed for your WAN topology.
• Run basic verification commands to confirm link status, speed negotiation, and traffic flow across the new WAN ports.

Frequently asked questions

• Q: What is a VIC?
  

  A: A VIC, or WAN Interface Card, is a modular expansion card for Cisco routers that adds one or more Ethernet WAN ports, enabling additional or redundant WAN connectivity on supported platforms.

• Q: Which devices support VIC?
  

  A: Cisco routers that include VIC slots and IOS support for VIC modules. Check the device’s hardware and software compatibility lists before purchasing.

• Q: Are VIC ports auto-negotiating?
  

  A: Yes. The 10/100/1000BASE-T ports automatically negotiate the best common speed and duplex settings with connected devices for optimal performance.

• Q: What cables do I need?
  

  A: RJ-45 copper twisted-pair Ethernet cables are used for 10/100/1000BASE-T connections.

• Q: Can I upgrade an existing router with a VIC?
  

  A: If your router model supports VIC modules and has available VIC slots, you can upgrade to add WAN capacity and redundancy without replacing the entire router.