Da-Lite Motor Assy., 120v for LVC and VPI Screens with 3.25" Rollers

Da-LiteSKU: 5741753

Price:
Sale price$353.60

Description

Da-Lite Motor Assy., 120v for LVC and VPI Screens with 3.25" Rollers

The Da-Lite Motor Assembly is a purpose-built 120-volt drive system designed to power LVC and VPI projection screens that use 3.25-inch rollers. Crafted to deliver dependable performance in classrooms, conference rooms, and home theaters, this motorized unit brings smooth, controlled movement to your viewing space. It’s the ideal replacement part for Da-Lite screens, providing seamless integration with existing control setups and keeping your screen rising and lowering with consistent speed and quiet operation. If you’re upgrading an older system or repairing a failed motor, this 120V motor assembly delivers the reliability and durability you expect from Da-Lite.

  • Compatible with Da-Lite LVC and VPI screens: Specifically engineered for the LVC (Large Viewing Continuous) and VPI (Video Projection Integration) families that feature 3.25" rollers, ensuring precise alignment and balanced motion. This motor assembly is designed to slot into the same mounting points as the original component, minimizing downtime during installation and preserving the original screen geometry for a clean, level roll every time. Whether replacing a worn-out unit or refreshing an aging system, you’ll experience dependable synchronization with your existing screen hardware.
  • 120V operation for standard power systems: This unit runs on standard 120-volt electrical supply, enabling straightforward integration into most commercial and residential spaces. It’s compatible with common wall outlets and theater control configurations, allowing you to connect to existing switches or automation systems without needing specialized low-voltage wiring. The 120V design provides robust torque for raising and lowering screens with heavier fabrics or larger casings, while preserving smooth starts and stops to minimize wear on the roller assembly.
  • Designed for smooth, quiet performance: The Da-Lite motor assembly prioritizes quiet operation and steady motion, helping maintain a distraction-free viewing environment. With balanced gearing and a precisely calibrated drive mechanism, the motor delivers consistent lift speed and minimal vibration, even under prolonged use. This makes it suitable for presentation spaces where noise can interrupt the experience, such as classrooms, lecture halls, or premium home theater setups.
  • Durable, maintenance-friendly construction: Built to withstand the rigors of daily use, the motor assembly employs sturdy components designed for longevity. The modular design helps simplify maintenance and replacement, reducing downtime if any component requires service. This translates into lower total cost of ownership and faster turnaround when a replacement part is necessary, so your screen is back in operation with minimal interruption.
  • Easy replacement and integration into existing systems: For installers and end users, this motor assembly is a practical choice for quick upgrades or repairs. Its form factor aligns with the original Da-Lite design, allowing a straightforward swap that preserves the original screen geometry and travel limits. With clear compatibility for LVC and VPI models and 3.25" rollers, you can restore performance without extensive rewiring or recalibration, making it an efficient option for facility managers and home theater enthusiasts alike.

Technical Details of Da-Lite Motor Assy., 120v for LVC and VPI Screens with 3.25" Rollers

  • Voltage: 120V AC
  • Compatibility: Da-Lite LVC and VPI projection screens with 3.25-inch rollers
  • Roller size: 3.25 inches (roller diameter specified by the screen system)
  • Purpose: Replacement motor assembly for lift-and-lower mechanism
  • Brand: Da-Lite
  • Product type: Motor assembly for projection screen systems
  • UPC/SKU: Not provided in the current data set

how to install Da-Lite Motor Assy., 120v for LVC and VPI Screens with 3.25" Rollers

Installing the Da-Lite motor assembly is a manageable upgrade that can breathe new life into your screen system. Follow these general steps to ensure a proper fit and reliable operation. Always disconnect power before starting any installation to prevent electrical shock or unintended movement of the screen.

  • Power down and unplug the projector area to ensure there is no electrical current flowing to the screen mechanism.
  • Access the screen housing by removing the access panel or cover from the bottom or side of the screen cabinet, depending on your model’s design.
  • Carefully disconnect the old motor assembly from its drive belt, limit switches, and wiring harness. Take note of routing and connections, or photograph them for reference during reassembly.
  • Position the new Da-Lite 120V motor assembly in place, aligning mounting holes with the existing chassis. Secure the unit with the original fasteners, ensuring there is no binding and that the assembly sits flush against the mounting surface.
  • Reconnect the motor’s drive belt to the roller system, reattach any limit switches, and reconnect the wiring harness to the screen control board or power input as per the manufacturer’s wiring diagram. If your system uses a control relay or switch, ensure proper compatibility and secure wiring to the correct terminals.
  • Replace the access panel and restore power. Test the lift mechanism by slowly raising and lowering the screen. Observe for smooth operation, correct travel limits, and any unusual sounds or vibration. If the screen doesn’t reach its full travel or stops prematurely, revisit the mounting alignment and limit switch settings to ensure proper calibration.
  • If your installation includes a remote control or automation integration, verify that the control signals activate correctly and that the screen responds promptly to commands. Perform multiple cycles to confirm consistent performance under load.

Note: If you are uncertain about wiring or safety, consult a qualified technician or the authorized Da-Lite distributor for installation support. Ensuring correct wiring and safe mounting is essential for long-term reliability and user safety.

Frequently asked questions

  • Q: What screens is this motor assembly compatible with?
    A: It’s designed for Da-Lite LVC and VPI projection screens that utilize 3.25" rollers, providing a seamless fit with those specific models.
  • Q: What voltage does the motor require?
    A: The unit operates on 120V AC, suitable for standard electrical outlets and typical theater or classroom power circuits.
  • Q: Is this a direct replacement for the original motor?
    A: Yes, the motor assembly is intended as a replacement part for the specified LVC and VPI screens and should match the mounting points and drive mechanism of the original component.
  • Q: Does the package include mounting hardware or wiring?
    A: The core motor assembly is provided, but for some installations, you may need to reuse existing mounting hardware or wiring harnesses. Please verify with the seller or product listing for exact contents.
  • Q: Will this part require recalibration after installation?
    A: In many cases, no extensive recalibration is needed. However, it’s prudent to test travel limits and ensure the screen travels smoothly to its fully retracted and extended positions, adjusting limit switches if necessary.
  • Q: Where can I find installation support?
    A: Installation guidance is typically available from the distributor or Da-Lite’s technical resources. If you’re unsure about installation, contact a qualified technician for assistance.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed